DOWNLOAD Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man77) Service Manual ↓ Size: 365.34 KB | Pages: 10 in PDF or view online for FREE

Model
MX-3050N MX-3060N MX-3070N MX-3550N MX-3560N MX-3570N MX-4050N MX-4060N MX-4070N (serv.man77)
Pages
10
Size
365.34 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / CCE 1800 Rom Upgrade (1 2) for DSK ONLY MX-FR51U MX-FR52U Bulletin only
File
mx-3050n-mx-3060n-mx-3070n-mx-3550n-mx-3560n-mx-35.pdf
Date

Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man77) Service Manual / Technical Bulletin ▷ View online

【Description】・・・(1) 
No. 
Item 
Description 
Model 
MX-3050N 
MX-3550N 
MX-4050N 
MX-3060N 
MX-3560N 
MX-4060N 
MX-3070N 
MX-3570N 
MX-4070N 
MX-5050N 
MX-6050N 
MX-5070N 
MX-6070N 
78
 
Network 
Correction of machine lockup which may occur when touches “Check Wireless LAN 
Settings” in the environment where multiple access points with same SSID are set. 
79
 
Network 
Correction of operations gradually slowing down after polling for mail reception (POP3) 
 
80
 
Network 
Correction of failure to search global address book with designated search attribute 
The problem occurs when Server Usage is registered in the order of User 
Authentication and Address Book. 
81
 
Network 
Correction of image density become lighter 
This problem occurs during external authentication for OSA because toner save mode 
is enabled. 
82
 
Copy 
Change in Repeat Layout feature for Copy 
- Changing parting line from 8 px to 2 px 
- Addition of trim marks for marking line
- Addition of a feature to change layout method:
SIM55-3 SW No.42 Data 3
0: Positioning in a continuous manner (Default) 
1: Positioning evenly 
83
 
Copy 
Correction of failure to print page number in position when “Pamphlet Style” and “Page 
Number Print” are set together 
84
 
Copy 
Correction of machine lockup which may occur after finishing Preview for Easy Copy 
and changing settings 
85
 
Copy 
Correction of machine lockup with a message “Please wait.” which may occur during 
Copy job after clearing paper jam in Scanner mode 
86
 
Copy 
Correction of shifted position for Center Clearance in Copy job 
 
87
 
Image Quality 
Modification of occasional contamination with toner which appears on paper feed 
direction side of output image 
NA 
NA 
88
 
Image Quality 
Correction of the problem that the periodic mis-registration of sub scanning may occur 
when performing the registration adjustment. 
89
 
Image Quality 
Following default values have been changed as the countermeasure for the image with 
the black stripe generated by the transfer cleaning failure: 
(1)  Soft SW (Sim55-1 SW12-4: 0->1)  Enable the solid image output mode by 1st 
transfer blade
(2)  Soft SW (Sim55-1 SW27-4: 0->1)  Enable the operation to output the solid image 
when performing the transfer maintenance 
Installing this firmware in the field will automatically change the settings to the above 
settings. 
NA 
NA 
○ 
○ 
90
 
Image Quality 
Implementation of a Soft SW which interrupts a job to provide lubricant. 
The purpose of implementing this Soft SW is to modify black streaks due to defective 
Transfer cleaning. 
0: No interruption during a job (Default) 
1: The job is interrupted for application of lubricant,. 
91
 
Image Quality 
Correction of failure to execute auto registration adjustment after replacing toner 
cartridge 
The registration adjustment will not be executed unless it is executed manually or by 
turning off and on the power. 
○=applied
 
 
【Description】・・・(1) 
 
No. 
Item 
Description 
Model 
MX-3050N 
MX-3550N 
MX-4050N 
MX-3060N 
MX-3560N 
MX-4060N 
MX-3070N 
MX-3570N 
MX-4070N 
MX-5050N 
MX-6050N 
MX-5070N 
MX-6070N 
92
 
Image Quality 
Correction of a failure which occurs with following steps: 
1. Leave the MFP for long hours under “Ready” status. 
2. Start a job and cancel the job right away. 
3. Start printing another job immediately. 
4. Fusing error occurs. 
 
 
 
 
93
 
Options 
Correction of the problem that the space key of USB keyboard cannot be recognized   
 
 
 
 
94
 
Options 
Correction of the occasional communication error (F1-51/F1-30) between FIN    and 
SDL 
 
 
 
 
95
 
Options 
Correction of the occasional communication error (F1-00) between FIN and PCU PWB 
 
 
 
 
96
 
Options 
Correction of the following issue: 
Some sets of the saddle stitch jobs may not be stapled after replacing the staple 
cartridge when using Recycle Paper or the thin large size paper (Paper Length: 
298mm or more)   
 
 
 
 
97
 
Options 
Correction of the problem that the rear end of Pre-Punched paper may be mis-
detected. 
 
 
 
 
98
 
Options 
Allowing discharging papers onto job separator while Relay unit is installed 
 
 
 
 
99
 
Options 
(MX-LC17) 
Firmware modification for common use in MX-LC17 and MX-LC17N. 
(Version has been updated for purpose of common use so there is no 
change in the machine settings.) 
 
 
 
 
100
 
Options 
(MX-LC17) 
Correction of the problem that the actual remaining quantity is different from the 
indication. 
 
 
 
 
101
 
Image Send 
Correction of the problem that the layout may be corrupted when copying the output 
searchable PDF file and then pasting it to Word file. 
NA 
○ 
NA 
○ 
102
 
Image Send 
Correction of the following problem when sending the data with High-compression + 
OCR: 
  *Data may not be sent due to NG90-**** 
         or   
  *MFP may lock up while displaying “Processing” in the job status. 
NA 
○ 
NA 
○ 
103
 
Image Send 
Depending on the application of PC to open VCF file for Business Card Scan function, 
the character may be garbled.    As the countermeasure, Soft SW to switch the 
character code of VCF file for Business Card Scan has been added. 
 
SIM55-3 SW37 Data 5 
0: UTF-8 (Default) 
1: Character Code of each language 
NA 
○ 
NA 
○ 
104
 
Image Send 
Improvement of processing of OCR function for the following reason: 
If the table is included in Office file scanned with OCR function, when printing that 
Office file with Direct Print, it may not be printed or the table may be missing. 
NA 
○ 
NA 
○ 
105
 
Image Send 
Correction of the problem that MFP may lock up with OSA Scan 
 
 
 
 
106
 
Image Send 
Correction of the problem that NG90-0000 may occur when previewing the data with 
Searchable PDF and performing the edit like Delete Page or Move Page, and then 
send the data by Scan Send. 
 
 
 
 
107
 
Image Send 
Additional feature for Scan to E-mail: The image file is stored to HDD on main unit and 
destination URL (download URL) is notified by e-mail. 
 
 
 
 
108
 
Image Send 
Addition of Image Crop for Special Modes in    Scanner mode 
 
 
 
 
 
 
○=applied 
 
 
【Description】・・・(1) 
 
No. 
Item 
Description 
Model 
MX-3050N 
MX-3550N 
MX-4050N 
MX-3060N 
MX-3560N 
MX-4060N 
MX-3070N 
MX-3570N 
MX-4070N 
MX-5050N 
MX-6050N 
MX-5070N 
MX-6070N 
109
 
Image Send 
Correction of failure to display address in the address column entered in Easy Fax 
mode 
 
 
 
 
110
 
Image Send 
(This case applies to Phoenix only.) 
Correction of scanning and outputting ruled lines on a table as image or text 
This problem may occur in OCR Scan depends on the condition of ruled line on the 
table. 
NA 
○ 
NA 
○ 
111
 
Image Send 
(This case applies to Phoenix only.) 
Correction of failure to register “Compact PDF (Ultra Fine)” as file format in Initial 
Status Settings for Scanner 
NA 
○ 
NA 
○ 
112
 
Image Send 
 
 
 
 
113
 
Image Send 
Addition of Soft SW to change image quality of monochrome original 
SIM55-3 SW No.41 Data 1 
0: Priority on file size 
1: Priority on image quality (Default) 
* For MIF manufactured in May, 2017 and before, the default remains “0: Priority on file 
size” even after firmware upgrade. 
 
 
 
 
114
 
Image Send 
Correction of displaying improper message which appears when domain of e-mail 
address is limited 
 
 
 
 
115
 
UI 
Correction of the wording, line break position, and text form in Traditional Chinese. 
 
 
 
 
116
 
UI 
Change of the message when the cover does not close after replacing the waste toner 
 
 
 
 
117
 
UI 
Correction of problem with reprinting data in Document Filing 
Changing paper size/type for Bypass tray to reprint the data from Document Filing 
ends up with black screen. 
 
 
 
 
118
 
UI 
Correction of a failure which occurs with following steps: 
1. Register OSA application while keyboard setting is set to French. 
2. Select NetFront 3.5 as browser. 
3. Use software numerical keypad and enter number. 
4. Symbols are entered instead of number. 
 
 
 
 
119
 
UI 
Correction of displaying “8-up” for all N-up modes for Easy Copy in Spanish and 
French 
 
 
 
 
120
 
UI 
Revision of description on cleaning of Main charger available in System Settings -> 
Image Quality Adjustment -> Collective Adjustment. 
 
 
 
 
121
 
UI 
Modification of display of number of copy 
When Language Setting is set to anything other than Japanese (e.g. English, 
German), size of four-digit number of copy for Easy Copy is reduce to display all digits. 
 
 
 
 
122
 
UI 
Eliminating “Use Banner” in System Settings -> Printer Settings -> Print Setting from 
PC/Mobile Terminal (Same setting in System Settings -> Network Settings -> Print Port 
Settings -> LPD Settings will remain.) 
 
 
 
 
123
 
OSA 
Implementation of target setting for Find My Address for OSA external authentication in 
Sharp OSA settings. The purpose is for users to use Find My Address during OSA 
external authentication. 
 
 
 
 
124
 
OSA 
Correction of improper login: 
When a designated user logs out of Device Accounting mode from OSA screen, the 
designated user may login again by mistake. 
 
 
 
 
125
 
OSA 
Correction of problem with Caps Lock 
Sometimes Caps Lock does not work while using external keyboard for in OSA 
application. 
 
 
 
 
 
 
○=applied 
 
 
【Description】・・・(1) 
 
No. 
Item 
Description 
Model 
MX-3050N 
MX-3550N 
MX-4050N 
MX-3060N 
MX-3560N 
MX-4060N 
MX-3070N 
MX-3570N 
MX-4070N 
MX-5050N 
MX-6050N 
MX-5070N 
MX-6070N 
109
 
Image Send 
Correction of failure to display address in the address column entered in Easy Fax 
mode 
 
 
 
 
110
 
Image Send 
(This case applies to Phoenix only.) 
Correction of scanning and outputting ruled lines on a table as image or text 
This problem may occur in OCR Scan depends on the condition of ruled line on the 
table. 
NA 
○ 
NA 
○ 
111
 
Image Send 
(This case applies to Phoenix only.) 
Correction of failure to register “Compact PDF (Ultra Fine)” as file format in Initial 
Status Settings for Scanner 
NA 
○ 
NA 
○ 
112
 
Image Send 
 
 
 
 
113
 
Image Send 
Addition of Soft SW to change image quality of monochrome original 
SIM55-3 SW No.41 Data 1 
0: Priority on file size 
1: Priority on image quality (Default) 
* For MIF manufactured in May, 2017 and before, the default remains “0: Priority on file 
size” even after firmware upgrade. 
 
 
 
 
114
 
Image Send 
Correction of displaying improper message which appears when domain of e-mail 
address is limited 
 
 
 
 
115
 
UI 
Correction of the wording, line break position, and text form in Traditional Chinese. 
 
 
 
 
116
 
UI 
Change of the message when the cover does not close after replacing the waste toner 
 
 
 
 
117
 
UI 
Correction of problem with reprinting data in Document Filing 
Changing paper size/type for Bypass tray to reprint the data from Document Filing 
ends up with black screen. 
 
 
 
 
118
 
UI 
Correction of a failure which occurs with following steps: 
1. Register OSA application while keyboard setting is set to French. 
2. Select NetFront 3.5 as browser. 
3. Use software numerical keypad and enter number. 
4. Symbols are entered instead of number. 
 
 
 
 
119
 
UI 
Correction of displaying “8-up” for all N-up modes for Easy Copy in Spanish and 
French 
 
 
 
 
120
 
UI 
Revision of description on cleaning of Main charger available in System Settings -> 
Image Quality Adjustment -> Collective Adjustment. 
 
 
 
 
121
 
UI 
Modification of display of number of copy 
When Language Setting is set to anything other than Japanese (e.g. English, 
German), size of four-digit number of copy for Easy Copy is reduce to display all digits. 
 
 
 
 
122
 
UI 
Eliminating “Use Banner” in System Settings -> Printer Settings -> Print Setting from 
PC/Mobile Terminal (Same setting in System Settings -> Network Settings -> Print Port 
Settings -> LPD Settings will remain.) 
 
 
 
 
123
 
OSA 
Implementation of target setting for Find My Address for OSA external authentication in 
Sharp OSA settings. The purpose is for users to use Find My Address during OSA 
external authentication. 
 
 
 
 
124
 
OSA 
Correction of improper login: 
When a designated user logs out of Device Accounting mode from OSA screen, the 
designated user may login again by mistake. 
 
 
 
 
125
 
OSA 
Correction of problem with Caps Lock 
Sometimes Caps Lock does not work while using external keyboard for in OSA 
application. 
 
 
 
 
 
 
○=applied 
Page of 10
Display

Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man77) Service Manual / Technical Bulletin ▷ Download