Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man7) Service Manual ▷ View online
ii
Operational environment
Temperature: 10 to 35
C
Humidity: 20 to 85% RH
Atmospheric pressure: 590 to 1013hPa (altitude: 0 to 2000 m)
Contaminates
If dust enters the machine, it may cause dirty copy and a paper jam,
resulting in a shortened lifetime.
resulting in a shortened lifetime.
Direct sunlight
If the machine is installed under the rays of the sun, the exterior of the
machine may be discolored and abnormal copies may be produced.
machine may be discolored and abnormal copies may be produced.
Gases and chemicals
Do not install the machine at a place where there are gases and chem-
icals. Especially be careful to avoid installation near a diazo-type
copier, which produces ammonium gas.
icals. Especially be careful to avoid installation near a diazo-type
copier, which produces ammonium gas.
Copy quality may be adversely affected and a trouble may be caused.
Vibration
Avoid installation near a machine which produces vibrations.
If vibrations are applied to the copier machine, copy images may be
deflected and a trouble may be caused.
deflected and a trouble may be caused.
F. Note for handling PWB and electronic parts
When handling the PWB and the electronic parts, be sure to observe
the following precautions in order to prevent against damage by static
electricity.
the following precautions in order to prevent against damage by static
electricity.
• When in transit or storing, put the parts in an anti-static bag or an
anti-static case and do not touch them with bare hands.
• When and after removing the parts from an anti-static bag (case),
use an earth band as shown below:
• Put an earth band to your arm, and connect it to the machine.
• When repairing or replacing an electronic part, perform the proce-
dure on an anti-static mat.
85%
Humidity㸦RH㸧
60%
20%
iii
G. Note for proper drum, developing, fusing and
transfer unit handling
When handling the OPC drum, developing and transfer units, observe
the following items.
the following items.
Drum unit
• To prevent damage to the OPC drum, avoid working on the drum
unit in high intensity light areas.
• When the OPC drum is removed from the machine, cover it with
light blocking material. (When using paper, use about 10 sheets of
paper to cover it.)
paper to cover it.)
• Be careful not to attach fingerprints, oil, grease, or other foreign
material on the OPC drum surface.
Transfer unit
• Be careful not to "leave” fingerprints, oil, grease, or other foreign
material on the transfer roller, primary transfer belt and secondary
transfer roller.
transfer roller.
Developing unit
• Be careful not to "leave” fingerprints, oil, grease, or other foreign
material on the developing unit.
Fusing unit
• Be careful not to "leave” fingerprints, oil, grease, or other foreign
material on the fusing roller and the external heating belt.
• Do not leave the fusing roller in contact state for a long time.
If these items are neglected, a trouble may be generated in the copy
and print image quality.
and print image quality.
2. Transit and delivery
A. Implements, facility, and manpower
It is recommendable to use a forklift for bringing in the machine for
safety.
safety.
If no forklift is available, man-power of two persons is required. The
machine is considerably heavy, and requires safety precautions for
delivery and installation.
machine is considerably heavy, and requires safety precautions for
delivery and installation.
Transit of the machine must be made in packed condition to the install-
ing place.
ing place.
Since the hard disk drive is built in the machine, use care not to exert
vibrations or shocks to the machine when in transit.
vibrations or shocks to the machine when in transit.
B. Delivery
Remove the packing materials prior to installation in the office environ-
ment.
ment.
3. Relationship between the model name and
the designation in description of the
document
document
No.
Content
Method
1
Implements, facility,
and man power
and man power
Use a forklift. (If no forklift is available,
manpower of two persons is required.)
manpower of two persons is required.)
2
Delivery
Transit must be made in packed condition.
Model name
Designation in description
MX-3070V / MX-3060V / MX-3050V
30cpm machine
MX-3570V / MX-3560V / MX-3550V
35cpm machine
MX-4070V / MX-4060V / MX-4050V
40cpm machine
MX-4070V CONFIGURATION 1 – 1
MX-4070V
Service Manual
[1] CONFIGURATION
1. System diagram
MX-3070V
MX-3570V
MX-4070V
MX-3570V
MX-4070V
DIGITAL FULL COLOR
MULTIFUNCTIONAL SYSTEM
MULTIFUNCTIONAL SYSTEM
MX-DE25 N
STAND/550 SHEET
PAPER DRAWER
PAPER DRAWER
MX-DE26 N
STAND/2x550 SHEET
PAPER DRAWER
PAPER DRAWER
MX-DE27 N
STAND/3x550 SHEET
PAPER DRAWER
PAPER DRAWER
MX-LC17 N
LARGE CAPACITY
TRAY
TRAY
MX-LT10
LONG PAPER
FEEDING TRAY
FEEDING TRAY
MX-DE28 N
STAND/550&2100 SHEET
PAPER DRAWER
PAPER DRAWER
MX-TR19 N
EXIT TRAY UNIT
MX-TU16
EXIT TRAY CABINET
MX-RB25 N
PAPER PASS UNIT
MX-TR20
JOB SEPARATOR
TRAY
TRAY
MX-FN29
SADDLE STITCH
FINISHER (1K)
FINISHER (1K)
MX-FN28
FINISHER (1K)
MX-FN30
FINISHER (3K)
MX-FN31
SADDLE STITCH
FINISHER (3K)
FINISHER (3K)
MX-FN27 N
INNER FINISHER
MX-PN15
B/C/D
B/C/D
PUNCH
MODULE
MODULE
MX-PN14
B/C/D
B/C/D
PUNCH MODULE
MX-PN16
B/C/D
B/C/D
PUNCH
MODULE
MODULE
MX-3050V
MX-3550V
MX-4050V
MX-3550V
MX-4050V
MX-3060V
MX-3560V
MX-4060V
MX-3560V
MX-4060V
DIGITAL FULL COLOR
MULTIFUNCTIONAL SYSTEM
MULTIFUNCTIONAL SYSTEM
MX-UT10
UTILITY TABLE
MX-DE29 N
LOW STAND/550
SHEET PAPER
SHEET PAPER
MX-FWX1
INTERNET FAX
EXPANSION KIT
EXPANSION KIT
MX-AMX1
APPLICATION
INTEGRATION MODULE
INTEGRATION MODULE
MX-AMX2
APPLICATION
COMMUNICATION MODULE
COMMUNICATION MODULE
MX-AMX3
EXTERNAL ACCOUNT
MODULE
MODULE
MX-PF10
BARCODE FONT KIT
MX-FX15
FACSIMILE EXPANSION
KIT
KIT
AR-SU1
STAMP UNIT
MX-USX1
SHARPDESK 1 LICENSE
KIT
KIT
MX-USX5
SHARPDESK 5 LICENSE
KIT
KIT
MX-US10
SHARPDESK 10 LICENSE
KIT
KIT
MX-US50
SHARPDESK 50 LICENSE
KIT
KIT
MX-USA0
SHARPDESK 100 LICENSE
KIT
KIT
MX-PK13
PS3 EXPANSION KIT
MX-PU10
DIRECT PRINT EXPANSION
KIT
KIT
MX-EB11
ENHANCED COMPRESSION
KIT
KIT
MX-EB18
WIRELESS LAN ADAPTOR
MX-FR51U/FR52U
DATA SECURITY KIT
MX-4070V CONFIGURATION 1 – 2
2. Option list
STD: Standard equipment
OPT: Installable option
*1: Option in some area
*2: No support in some area
OPT: Installable option
*1: Option in some area
*2: No support in some area
Model name
Description
MX-3070V
MX-3570V
MX-4070V
MX-3570V
MX-4070V
MX-3060V
MX-3560V
MX-4060V
MX-3560V
MX-4060V
MX-3050V
MX-3550V
MX-4050V
MX-3550V
MX-4050V
Remarks
Document Feed System
―
REVERSING SINGLE PASS FEEDER
―
STD
STD
―
DUPREX SINGLE PASS FEEDER
STD
―
―
Paper Feed System
MX-DE25 N
STAND/550 SHEET PAPER DRAWER
OPT
OPT
OPT
MX-DE26 N
STAND/2x550 SHEET PAPER DRAWER
OPT
OPT
OPT
MX-DE27 N
STAND/3x550 SHEET PAPER DRAWER
OPT
OPT
OPT
MX-DE28 N
STAND/550&2100 SHEET PAPER DRAWER
OPT
OPT
OPT
MX-DE29 N
LOW STAND/550 SHEET PAPER
OPT
OPT
OPT
MX-LC17 N
LARGE CAPACITY TRAY
OPT
OPT
OPT
MX-LT10
LONG PAPER FEEDING TRAY
OPT
OPT
OPT
Paper Exit System
MX-TR19 N
EXIT TRAY UNIT
OPT
OPT
OPT
MX-TU16
EXIT TRAY CABINET
STD/OPT
STD/OPT
STD/OPT
*1
MX-TR20
JOB SEPARATOR TRAY
OPT
OPT
OPT
MX-FN27 N
INNER FINISHER
OPT
OPT
OPT
MX-PN14B
PUNCH MODULE
OPT
OPT
OPT
For MX-FN27 N
MX-PN14C
OPT
OPT
OPT
MX-PN14D
OPT
OPT
OPT
MX-FN28
FINISHER (1K)
OPT
OPT
OPT
MX-FN29
SADDLE STITCH FINISHER (1K)
OPT
OPT
OPT
MX-RB25 N
PAPER PASS UNIT
OPT
OPT
OPT
MX-PN15B
PUNCH MODULE
OPT
OPT
OPT
For MX-FN28/FN29
MX-PN15C
OPT
OPT
OPT
MX-PN15D
OPT
OPT
OPT
MX-FN30
FINISHER (3K)
OPT
OPT
OPT
MX-FN31
SADDLE STITCH FINISHER (3K)
OPT
OPT
OPT
MX-PN16B
PUNCH MODULE
OPT
OPT
OPT
For MX-FN30/FN31
MX-PN16C
OPT
OPT
OPT
MX-PN16D
OPT
OPT
OPT
Printer Expansion
MX-PK13
PS3 EXPANSION KIT
STD
STD
OPT
MX-PF10
BARCODE FONT KIT
OPT
OPT
OPT
MX-PU10
DIRECT PRINT EXPANSION KIT
STD
STD
OPT
Image Send Expansion
MX-FX15
FACSIMILE EXPANSION KIT
OPT
OPT
OPT
*2
AR-SU1
STAMP UNIT
OPT
OPT
OPT
MX-FWX1
INTERNET FAX EXPANSION KIT
OPT
OPT
OPT
MX-EB11
ENHANCED COMPRESSION KIT
STD
STD
OPT
Authentication / Security
MX-FR51U
DATA SECURITY KIT
―
―
OPT
MX-FR52U
DATA SECURITY KIT
OPT
OPT
―
Application / Solution
MX-USX1
SHARPDESK 1 LICENSE KIT
OPT
OPT
OPT
MX-USX5
SHARPDESK 5 LICENSE KIT
OPT
OPT
OPT
MX-US10
SHARPDESK 10 LICENSE KIT
OPT
OPT
OPT
MX-US50
SHARPDESK 50 LICENSE KIT
OPT
OPT
OPT
MX-USA0
SHARPDESK 100 LICENSE KIT
OPT
OPT
OPT
MX-AMX1
APPLICATION INTEGRATION MODULE
OPT
OPT
OPT
MX-AMX2
APPLICATION COMMUNICATION MODULE
STD/OPT
STD/OPT
OPT
*1
MX-AMX3
EXTERNAL ACCOUNT MODULE
STD/OPT
STD/OPT
OPT
*1
Other
MX-EB18
WIRELESS LAN ADAPTOR
STD
STD/OPT
OPT
*2
―
KEYBOARD
STD
STD
―
*2
MX-UT10
UTILITY TABLE
OPT
OPT
OPT
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man7) service manuals if exist.