Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man7) Service Manual ▷ View online
MX-4070V MX-DE25 N/DE26 N/DE27 N/DE29 N (STAND/1x550/2x550/3x550/1x550(Low) SHEET PAPER DRAWER) 3 – 1
MX-4070V
Service Manual
[3] MX-DE25 N/DE26 N/DE27 N/DE29 N (STAND/1x550/2x550/3x550/1x550(Low)
SHEET PAPER DRAWER)
1. Unpacking & Installation
A. MX-DE25 N/DE26 N/DE27 N
Before installation, be sure to turn both the operation and main power
switches off and disconnect the power plug from the power outlet.
Make double sure that the data lamp on the operation panel does not
light up or blink when performing installation.
switches off and disconnect the power plug from the power outlet.
Make double sure that the data lamp on the operation panel does not
light up or blink when performing installation.
(1)
Packed items check
(2)
Right adjuster attachment
1)
Turn each adjuster to fix the desk unit.
(3)
Main unit and desk unit connection
1)
Put the main unit on the desk unit.
Use man power of four persons or more to lift the main unit.
Place the main unit on the desk unit slowly by fitting the external
lines. Check to insure that the positioning pin on the top of the
desk unit is securely engaged in the positioning groove of the
main unit.
lines. Check to insure that the positioning pin on the top of the
desk unit is securely engaged in the positioning groove of the
main unit.
2)
Remove the tray 1 and the tray 2.
No.
Name
Quantity
1
Desk unit
1
2
Fixing screws (M4 x 8)
4
1
MX-DE27 N
MX-DE26 N
MX-DE25 N
2
1
2
1
2
MX-4070V MX-DE25 N/DE26 N/DE27 N/DE29 N (STAND/1x550/2x550/3x550/1x550(Low) SHEET PAPER DRAWER) 3 – 2
3)
Raise the linkage plates on the right and left sides of the front side
of the desk unit, and fix them with the fixing screws included in the
package.
of the desk unit, and fix them with the fixing screws included in the
package.
4)
Attach the tray 1 and the tray 2.
5)
Take off the small cover of right and left sides of the main body
rear. And fix them with the fixing screws included in the package.
Return small covers.
rear. And fix them with the fixing screws included in the package.
Return small covers.
(4)
Release the lock
1)
Pull out each tray. Turn and remove the fixing material, and
remove the caution sheet.
Attach the removed fixing material to the position shown in the fig-
ure for storage.
Close the cassette which was pulled out.
remove the caution sheet.
Attach the removed fixing material to the position shown in the fig-
ure for storage.
Close the cassette which was pulled out.
Before turning on the power, check to insure that the fixing mate-
rial of the tray is disengaged. If the power is turned on without dis-
engaging the fixing material, a trouble may be resulted.
rial of the tray is disengaged. If the power is turned on without dis-
engaging the fixing material, a trouble may be resulted.
(5)
Connector connection
1)
Remove the cover from the rear side of the machine.
2)
Connect the connector.
MX-4070V MX-DE25 N/DE26 N/DE27 N/DE29 N (STAND/1x550/2x550/3x550/1x550(Low) SHEET PAPER DRAWER) 3 – 3
3)
Separate the base of the cover in nippers.
4)
Attach the cover.
MX-4070V MX-DE25 N/DE26 N/DE27 N/DE29 N (STAND/1x550/2x550/3x550/1x550(Low) SHEET PAPER DRAWER) 3 – 4
B. MX-DE29 N
If a connector is removed out of a plastic bag prior to the connection, it
may get caught in the gap between the drawer and main unit. Do not
remove the connector while unpacking the drawer. Remove it when
connecting the connector after installation to main unit.
may get caught in the gap between the drawer and main unit. Do not
remove the connector while unpacking the drawer. Remove it when
connecting the connector after installation to main unit.
(1)
Unpacking
a. Packed items check
*1: These items will be required for desktop installation.
Before installation, be sure to turn both the operation and main power
switches off and disconnect the power plug from the power outlet.
switches off and disconnect the power plug from the power outlet.
Make double sure that the data lamp on the operation panel does not
light up or blink when performing installation.
light up or blink when performing installation.
b. Packed items removal
1)
Remove the packed items fixed with a tape as follows.
(2)
Installation location
a. For installation on the floor
1)
Rotate each adjuster to fix and secure Desk unit.
b. For installation on desktop
1)
Place packing material (Top packing cushion for four corners) on
the floor and turn the paper drawer upside down.
the floor and turn the paper drawer upside down.
*NOTE: Turn the paper drawer upside down without removing fix-
ing material. Otherwise, a rotating plate may damage the paper
drawer.
ing material. Otherwise, a rotating plate may damage the paper
drawer.
This work must be done by two or more personnel.
2)
Remove all adjusters and casters.
No.
Name
Quantity
1
Desk unit
1
2
Fixing screws (M4 x 8)
4
3
Fixing stepping screws *1
4
4
Rubber foot*1
4
5
Bottom sheet*1
2
1
4
3
2
5
Top packing cushion
Don t remove fixing material.
Remove screws and a caster.
Remove an adjuster.
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man7) service manuals if exist.