Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man5) Service Manual ▷ View online
MX-4070N ADJUSTMENTS AND SETTINGS 5 – 47
14-D
(1)
Color copy density adjustment (for each
color copy mode) (separately for the low
density area and the high-density area)
(No need to adjust normally)
Color copy density adjustment (for each
color copy mode) (separately for the low
density area and the high-density area)
(No need to adjust normally)
The density is adjusted in each copy mode individually.
This adjustment must be performed in the following cases:
• When there is necessity to change the copy density of the low
This adjustment must be performed in the following cases:
• When there is necessity to change the copy density of the low
density and high density part at each copy density individually.
• When there is necessity to change the density gradient of the
• When there is necessity to change all copy density by each the
• When there is necessity to change all copy density by each the
copy mode individually.
• When there is request from the user.
1) Enter the SIM 46-1 mode.
2) Select the copy mode to be adjusted with the scroll key.
1) Enter the SIM 46-1 mode.
2) Select the copy mode to be adjusted with the scroll key.
46-41
FAX send image density adjustment (Normal
text mode)
text mode)
—
—
—
—
—
—
—
—
—
46-42
FAX send image density adjustment (Fine text
mode)
mode)
—
—
—
—
—
—
—
—
—
46-43
FAX send image density adjustment (Super
fine mode)
fine mode)
—
—
—
—
—
—
—
—
—
46-44
FAX send image density adjustment (Ultra
fine mode)
fine mode)
—
—
—
—
—
—
—
—
—
46-45
FAX send image density adjustment (600dpi
mode)
mode)
—
—
—
—
—
—
—
—
—
46-46
FAX send image density adjustment
(RGB_RIP)
(RGB_RIP)
—
—
—
—
—
—
—
—
—
46-47
Copy image, image send image, FAX send
image (JPEG) compression ratio setting
(Normally unnecessary to the setting change)
image (JPEG) compression ratio setting
(Normally unnecessary to the setting change)
46-48
Resolution setting for each color copy mode
(No need to adjust normally)
(No need to adjust normally)
—
—
—
—
—
—
—
—
46-51
Gamma manual adjustment for the copy
mode heavy paper and the image process
mode (dither) (No need to adjust normally)
mode heavy paper and the image process
mode (dither) (No need to adjust normally)
—
—
—
—
—
—
46-52
Gamma default setting for the copy mode
heavy paper and the image process mode
(dither)
heavy paper and the image process mode
(dither)
—
—
—
—
—
46-54
Copy gamma, color balance adjustment for
each dither (Automatic adjustment) (No need
to adjust normally)
each dither (Automatic adjustment) (No need
to adjust normally)
—
—
—
—
—
46-55
Dropout color setting
—
—
—
—
—
—
—
—
—
46-58
Pseudo resolution UP function setting
—
—
—
—
—
—
46-60
Color (Copy/Scan) mode sharpness
adjustment (No need to adjust normally)
adjustment (No need to adjust normally)
—
46-61
Area separation recognition level adjustment
(No need to adjust normally)
(No need to adjust normally)
—
46-62
ACS, area separation, background image
process, automatic exposure mode operation
conditions setting (Normally unnecessary to
the setting change)
process, automatic exposure mode operation
conditions setting (Normally unnecessary to
the setting change)
—
—
46-63
Copy/Scan low density image density
adjustment (for each mode) (No need to
adjust normally)
adjustment (for each mode) (No need to
adjust normally)
—
—
—
—
—
—
46-65
Color correction table setting (No need to
adjust normally)
adjust normally)
—
—
—
—
—
—
—
—
46-66
Watermark adjustment
—
—
—
—
—
46-68
Scan mode auto resolution judgement
adjustment
adjustment
—
—
—
—
—
—
—
—
46-74
Printer/Copy color balance and density
adjustment (Automatic adjustment) (Basic
adjustment)
adjustment (Automatic adjustment) (Basic
adjustment)
—
—
—
—
—
46-90
High-compression PDF image process
operation setting (Normally unnecessary to
the setting change)
operation setting (Normally unnecessary to
the setting change)
—
—
—
—
—
—
—
—
46-91
Black text emphasis fine adjustment
—
—
—
—
—
—
—
—
Simulation No. and descriptions of the adjustment
Copy Mode
Image Scan Mode
Color
Monochrome
Color
Monochrome
Auto Manual
Auto
Manual
Auto
Manual
Auto
Manual
FAX
Printer
Display/Item
Content
Setting
range
Default
A
AUTO
Auto
LOW
1 - 99
50
HIGH
1 - 99
50
B
TEXT
Text
LOW
1 - 99
50
HIGH
1 - 99
50
C
TEXT/PRINTED
PHOTO
PHOTO
Text/Printed Photo
LOW
1 - 99
50
HIGH
1 - 99
50
D
TEXT/PHOTO
Text/Photo
LOW
1 - 99
50
HIGH
1 - 99
50
E
PRINTED PHOTO
Printed Photo
LOW
1 - 99
50
HIGH
1 - 99
50
F
PHOTOGRAPH
Photograph
LOW
1 - 99
50
HIGH
1 - 99
50
G
MAP
Map
LOW
1 - 99
50
HIGH
1 - 99
50
H
LIGHT
Light document
LOW
1 - 99
50
HIGH
1 - 99
50
MX-4070N ADJUSTMENTS AND SETTINGS 5 – 48
3) Enter the adjustment value with 10-key and press [OK] key.
When adjusting the copy density on the low density part, select
"LOW" mode and change the adjustment value. When adjust-
ing the copy density on the high density part, select "HIGH"
mode and change the adjustment value.
When the adjustment value is increased, the copy density is
increased. When the adjustment value is decreased, the copy
density is decreased.
"LOW" mode and change the adjustment value. When adjust-
ing the copy density on the high density part, select "HIGH"
mode and change the adjustment value.
When the adjustment value is increased, the copy density is
increased. When the adjustment value is decreased, the copy
density is decreased.
4) Make a copy and check the adjustment result.
Switch the adjustment simulation mode and the normal copy
mode alternately, and adjust and check the adjustment result.
Repeat switching the adjustment simulation mode and the nor-
mal copy mode and changing the adjustment value and check-
ing the copy until a satisfactory result is obtained.
mode alternately, and adjust and check the adjustment result.
Repeat switching the adjustment simulation mode and the nor-
mal copy mode and changing the adjustment value and check-
ing the copy until a satisfactory result is obtained.
14-D
(2)
Monochrome copy density adjustment (for
each monochrome copy mode) (separately
for the low-density area and the high-
density area) (No need to adjust normally)
Monochrome copy density adjustment (for
each monochrome copy mode) (separately
for the low-density area and the high-
density area) (No need to adjust normally)
The density is adjusted in each copy mode individually.
This adjustment must be performed in the following cases:
• When there is necessity to change the copy density of the low
This adjustment must be performed in the following cases:
• When there is necessity to change the copy density of the low
density and high density part at each copy density individually.
• When there is necessity to change the density gradient of the
copy by each the copy mode individually.
• When there is necessity to change all copy density by each the
copy mode individually.
• When there is request from the user.
1)
1)
Enter the SIM 46-2 mode.
2)
Select the copy mode to be adjusted with the scroll key.
3)
Enter the adjustment value with 10-key and press [OK] key.
When adjusting the copy density on the low density part, select
"LOW" mode and change the adjustment value. When adjust-
ing the copy density on the high density part, select "HIGH"
mode and change the adjustment value.
When the adjustment value is increased, the copy density is
increased. When the adjustment value is decreased, the copy
density is decreased.
When adjusting the copy density on the low density part, select
"LOW" mode and change the adjustment value. When adjust-
ing the copy density on the high density part, select "HIGH"
mode and change the adjustment value.
When the adjustment value is increased, the copy density is
increased. When the adjustment value is decreased, the copy
density is decreased.
4)
Make a copy and check the adjustment result.
Switch the adjustment simulation mode and the normal copy
mode alternately, and adjust and check the adjustment result.
Repeat switching the adjustment simulation mode and the nor-
mal copy mode and changing the adjustment value and check-
ing the copy until a satisfactory result is obtained.
Switch the adjustment simulation mode and the normal copy
mode alternately, and adjust and check the adjustment result.
Repeat switching the adjustment simulation mode and the nor-
mal copy mode and changing the adjustment value and check-
ing the copy until a satisfactory result is obtained.
14-D
(3)
Color copy color balance, gamma
adjustment (for each color copy mode) (No
need to adjust normally)
Color copy color balance, gamma
adjustment (for each color copy mode) (No
need to adjust normally)
This adjustment is used to execute the color balance adjustment
for each density level in each color copy mode.
This adjustment must be performed in the following cases:
• When there is necessity to change the color balance and gamma
for each density level in each color copy mode.
This adjustment must be performed in the following cases:
• When there is necessity to change the color balance and gamma
by each the copy mode individually.
• When there is request from the user.
1)
1)
Enter the SIM 46-10 mode.
2)
Select the copy mode to be adjusted with the mode key.
I
TEXT
(COPY TO
COPY)
(COPY TO
COPY)
Text
(Copy document)
(Copy document)
LOW
1 - 99
50
HIGH
1 - 99
50
J
TEXT/PRINTED
PHOTO
(COPY TO
COPY)
PHOTO
(COPY TO
COPY)
Text/Printed Photo
(Copy document)
(Copy document)
LOW
1 - 99
50
HIGH
1 - 99
50
K
PRINTED PHOTO
(COPY TO
COPY)
(COPY TO
COPY)
Printed Photo
(Copy document)
(Copy document)
LOW
1 - 99
50
HIGH
1 - 99
50
L
TEXT
(COLOR TONE
ENHANCEMENT)
(COLOR TONE
ENHANCEMENT)
Text
(Color tone
enhancement)
(Color tone
enhancement)
LOW
1 - 99
50
HIGH
1 - 99
50
M
TEXT/PRINTED
PHOTO
(COLOR TONE
ENHANCEMENT)
PHOTO
(COLOR TONE
ENHANCEMENT)
Text/Printed Photo
(Color tone
enhancement)
(Color tone
enhancement)
LOW
1 - 99
50
HIGH
1 - 99
50
N
TEXT/PHOTO
(COLOR TONE
ENHANCEMENT)
(COLOR TONE
ENHANCEMENT)
Text/Photo
(Color tone
enhancement)
(Color tone
enhancement)
LOW
1 - 99
50
HIGH
1 - 99
50
O
PRINTED PHOTO
(COLOR TONE
ENHANCEMENT)
(COLOR TONE
ENHANCEMENT)
Printed Photo
(Color tone
enhancement)
(Color tone
enhancement)
LOW
1 - 99
50
HIGH
1 - 99
50
P
PHOTOGRAPH
(COLOR TONE
ENHANCEMENT)
(COLOR TONE
ENHANCEMENT)
Photograph
(Color tone
enhancement)
(Color tone
enhancement)
LOW
1 - 99
50
HIGH
1 - 99
50
Q
MAP
(COLOR TONE
ENHANCEMENT)
(COLOR TONE
ENHANCEMENT)
Map
(Color tone
enhancement)
(Color tone
enhancement)
LOW
1 - 99
50
HIGH
1 - 99
50
R
LIGHT
(COLOR TONE
ENHANCEMENT)
(COLOR TONE
ENHANCEMENT)
Light
(Color tone
enhancement)
(Color tone
enhancement)
LOW
1 - 99
50
HIGH
1 - 99
50
S
SINGLE COLOR
Single color
LOW
1 - 99
50
HIGH
1 - 99
50
T
SINGLE COLOR
(COPY TO
COPY)
(COPY TO
COPY)
Single color
(Copy document)
(Copy document)
LOW
1 - 99
50
HIGH
1 - 99
50
U
TWO COLOR
Two-color
LOW
1 - 99
50
HIGH
1 - 99
50
V
TWO COLOR
(COPY TO
COPY)
(COPY TO
COPY)
Two-color
(Copy document)
(Copy document)
LOW
1 - 99
50
HIGH
1 - 99
50
Display/Item
Content
Setting
range
Default
Display/Item
Content
Setting
range
Default
A
AUTO1
Auto 1
LOW
1 - 99
50
HIGH
1 - 99
50
B
AUTO2
Auto 2
LOW
1 - 99
50
HIGH
1 - 99
50
C
AUTO3
Auto 3
LOW
1 - 99
50
HIGH
1 - 99
50
D
TEXT
Text
LOW
1 - 99
50
HIGH
1 - 99
50
E
TEXT/PRINTED
PHOTO
PHOTO
Text/Printed
Photo
Photo
LOW
1 - 99
50
HIGH
1 - 99
50
F
TEXT/PHOTO
Text/photograph
LOW
1 - 99
50
HIGH
1 - 99
50
G
PRINTED PHOTO
Printed Photo
LOW
1 - 99
50
HIGH
1 - 99
50
H
PHOTOGRAPH
Photograph
LOW
1 - 99
50
HIGH
1 - 99
50
I
MAP
Map
LOW
1 - 99
50
HIGH
1 - 99
50
J
AUTO1
(COPY TO COPY)
(COPY TO COPY)
Auto1
(Copy document)
(Copy document)
LOW
1 - 99
50
HIGH
1 - 99
50
K
AUTO2
(COPY TO COPY)
(COPY TO COPY)
Auto2
(copy to copy)
(copy to copy)
LOW
1 - 99
50
HIGH
1 - 99
50
L
AUTO3
(COPY TO COPY)
(COPY TO COPY)
Auto3
(Copy document)
(Copy document)
LOW
1 - 99
50
HIGH
1 - 99
50
M
TEXT
(COPY TO COPY)
(COPY TO COPY)
Text
(Copy document)
(Copy document)
LOW
1 - 99
50
HIGH
1 - 99
50
N
TEXT/PRINTED
PHOTO
(COPY TO COPY)
PHOTO
(COPY TO COPY)
Text/Printed
Photo
(Copy document)
Photo
(Copy document)
LOW
1 - 99
50
HIGH
1 - 99
50
O
PRINTED PHOTO
(COPY TO COPY)
(COPY TO COPY)
Printed Photo
(Copy document)
(Copy document)
LOW
1 - 99
50
HIGH
1 - 99
50
P
LIGHT
Light document
LOW
1 - 99
50
HIGH
1 - 99
50
MX-4070N ADJUSTMENTS AND SETTINGS 5 – 49
3) Select a color to change the adjustment value with the color
key.
4) Select the density level (point) to be adjusted with the scroll
key.
5) Enter the adjustment value with 10-key and press [OK] key.
When the adjustment value is increased, the density is
increased. When the adjustment value is decreased, the den-
sity is decreased.
When the arrow key is pressed, the color densities selected
with the color keys are collectively adjusted.
That is, all the density levels (points) from the low density point
to the high density point can be adjusted collectively.
When [EXECUTE] key is pressed, the adjustment pattern is
printed out.
This adjustment pattern can be used to check the color bal-
ance and the density for each density level (point).
increased. When the adjustment value is decreased, the den-
sity is decreased.
When the arrow key is pressed, the color densities selected
with the color keys are collectively adjusted.
That is, all the density levels (points) from the low density point
to the high density point can be adjusted collectively.
When [EXECUTE] key is pressed, the adjustment pattern is
printed out.
This adjustment pattern can be used to check the color bal-
ance and the density for each density level (point).
6) Make a copy and check the adjustment result.
Switch the adjustment simulation mode and the normal copy
mode alternately, and adjust and check the adjustment result.
Repeat switching the adjustment simulation mode and the nor-
mal copy mode and changing the adjustment value and check-
ing the copy until a satisfactory result is obtained.
mode alternately, and adjust and check the adjustment result.
Repeat switching the adjustment simulation mode and the nor-
mal copy mode and changing the adjustment value and check-
ing the copy until a satisfactory result is obtained.
14-D
(4)
Monochrome copy density, gamma
adjustment (for each monochrome copy
mode) (No need to adjust normally)
Monochrome copy density, gamma
adjustment (for each monochrome copy
mode) (No need to adjust normally)
This adjustment is used to execute the density adjustment for each
density level in each monochrome copy mode.
This adjustment must be performed in the following cases:
• When it is required to change the gamma in each copy mode.
• When there is request from the user.
1) Enter the SIM 46-16 mode.
2) Select the density level (point) to be adjusted with the scroll
density level in each monochrome copy mode.
This adjustment must be performed in the following cases:
• When it is required to change the gamma in each copy mode.
• When there is request from the user.
1) Enter the SIM 46-16 mode.
2) Select the density level (point) to be adjusted with the scroll
key.
3)
Enter the adjustment value with 10-key and press [OK] key.
When the adjustment value is increased, the density is
increased. When the adjustment value is decreased, the den-
sity is decreased.
When the arrow key is pressed, the densities are collectively
adjusted.
That is, all the density levels (points) from the low density point
to the high density point can be adjusted collectively.
When [EXECUTE] key is pressed, the adjustment pattern is
printed out.
The density at each density level (point) can be checked by
referring to this printed adjustment pattern. However, it is more
practical to make a copy and check it.
When the adjustment value is increased, the density is
increased. When the adjustment value is decreased, the den-
sity is decreased.
When the arrow key is pressed, the densities are collectively
adjusted.
That is, all the density levels (points) from the low density point
to the high density point can be adjusted collectively.
When [EXECUTE] key is pressed, the adjustment pattern is
printed out.
The density at each density level (point) can be checked by
referring to this printed adjustment pattern. However, it is more
practical to make a copy and check it.
4)
Make a copy and check the adjustment result.
Switch the adjustment simulation mode and the normal copy
mode alternately, and adjust and check the adjustment result.
Repeat switching the adjustment simulation mode and the nor-
mal copy mode and changing the adjustment value and check-
ing the copy until a satisfactory result is obtained.
Switch the adjustment simulation mode and the normal copy
mode alternately, and adjust and check the adjustment result.
Repeat switching the adjustment simulation mode and the nor-
mal copy mode and changing the adjustment value and check-
ing the copy until a satisfactory result is obtained.
14-D
(5)
Automatic monochrome (Copy/Scan/FAX)
mode document density scanning
operation (exposure operation) conditions
setting (Normally no need to set)
Automatic monochrome (Copy/Scan/FAX)
mode document density scanning
operation (exposure operation) conditions
setting (Normally no need to set)
Use for setting the condition of read operation (Exposure) for docu-
ment density in monochrome auto copy mode.
When a copy with correct density is not obtained by type of docu-
ment, change the setting.
This setting is required in the following cases.
• When a proper density copy is not obtained in the monochrome
ment density in monochrome auto copy mode.
When a copy with correct density is not obtained by type of docu-
ment, change the setting.
This setting is required in the following cases.
• When a proper density copy is not obtained in the monochrome
automatic copy mode.
• When a document with images near its lead edge is copied.
• When a document with colored background is copied.
1)
• When a document with colored background is copied.
1)
Enter the SIM 46-19 mode.
2)
Set REALTIME, STOP or PRE-SCAN to adjustment item AE
STOP COPY. For contents of each setting item, refer to below.
STOP COPY. For contents of each setting item, refer to below.
MODE1: High gamma (Improves the image contrast)
Item/Display
Density level
(Point)
Adjustment
value range
value range
Default
A
POINT1
Point1
1 - 999
500
B
POINT2
Point2
1 - 999
500
C
POINT3
Point3
1 - 999
500
D
POINT4
Point4
1 - 999
500
E
POINT5
Point5
1 - 999
500
F
POINT6
Point6
1 - 999
500
G
POINT7
Point7
1 - 999
500
H
POINT8
Point8
1 - 999
500
I
POINT9
Point9
1 - 999
500
J
POINT10
Point10
1 - 999
500
K
POINT11
Point11
1 - 999
500
L
POINT12
Point12
1 - 999
500
M
POINT13
Point13
1 - 999
500
N
POINT14
Point14
1 - 999
500
O
POINT15
Point15
1 - 999
500
P
POINT16
Point16
1 - 999
500
Q
POINT17
Point 17
1 - 999
500
Item/Display
Density level
(Point)
Adjustment
Value range
Default
A
POINT1
Point1
1 - 999
500
B
POINT2
Point2
1 - 999
500
C
POINT3
Point3
1 - 999
500
D
POINT4
Point4
1 - 999
500
E
POINT5
Point5
1 - 999
500
F
POINT6
Point6
1 - 999
500
G
POINT7
Point7
1 - 999
500
H
POINT8
Point8
1 - 999
500
I
POINT9
Point9
1 - 999
500
J
POINT10
Pint10
1 - 999
500
K
POINT11
Point11
1 - 999
500
L
POINT12
Point12
1 - 999
500
M
POINT13
Point13
1 - 999
500
N
POINT14
Point14
1 - 999
500
O
POINT15
Point15
1 - 999
500
P
POINT16
Point 16
1 - 999
500
Q
POINT17
Point 17
1 - 999
500
Display/
Item
Content
Set value
Default
AE_MODE
Auto exposure mode
MODE1
Japan:MODE1
Overseas:MODE2
Overseas:MODE2
MODE2
MODE3
MODE3
AE_STOP_
COPY
COPY
Auto B/W exposure
Stop (for copy)
Stop (for copy)
REALTIME
PRESCAN
STOP
PRESCAN
PRESCAN
AE_STOP_
FAX
FAX
Auto B/W exposure
Stop (for FAX)
Stop (for FAX)
ON
ON
OFF
AE_STOP_
SCAN
SCAN
Auto B/W exposure
Stop (for scanner)
Stop (for scanner)
REALTIME
STOP
STOP
PRESCAN
PRESCAN
AE_FILTER
Auto exposure filter
setting
setting
SOFT
NORMAL
NORMAL
SHARP
SHARP
AE_WIDTH
AE exposure width
FULL
FULL
Item/Display
Density level
(Point)
Adjustment
Value range
Default
MX-4070N ADJUSTMENTS AND SETTINGS 5 – 50
MODE2: Normal gamma
STOP: Reads the density of 3 - 7 mm area from leading edge of
document, decides the output image density according to the den-
sity of that part. (The output image density is constant at whole
area.)
REALTIME: Reads the density of width of the document one by
one, decides the output image density according to the density of
each part of the document. (The output image density may be not
constant at whole area.)
PRESCAN: Once the densities on the document surface are
scanned, the output image density is determined according to the
average of the scanned densities. (The output image density is
even for all the surface.)
In addition, the original type is automatically determined and the
processing is carried out in an optimum original mode.
AE WIDTH FULL: Document density reading area in monochrome
auto mode is 3 - 7mm (leading edge of document) x Document
width. No relationship to PRESCAN MODE
AE WIDTH PART: Document density reading area in monochrome
auto mode is 3 - 7mm (leading edge of document) x 100 mm
(width). No relationship to PRESCAN MODE
STOP: Reads the density of 3 - 7 mm area from leading edge of
document, decides the output image density according to the den-
sity of that part. (The output image density is constant at whole
area.)
REALTIME: Reads the density of width of the document one by
one, decides the output image density according to the density of
each part of the document. (The output image density may be not
constant at whole area.)
PRESCAN: Once the densities on the document surface are
scanned, the output image density is determined according to the
average of the scanned densities. (The output image density is
even for all the surface.)
In addition, the original type is automatically determined and the
processing is carried out in an optimum original mode.
AE WIDTH FULL: Document density reading area in monochrome
auto mode is 3 - 7mm (leading edge of document) x Document
width. No relationship to PRESCAN MODE
AE WIDTH PART: Document density reading area in monochrome
auto mode is 3 - 7mm (leading edge of document) x 100 mm
(width). No relationship to PRESCAN MODE
Operation in monochrome auto copy mode:
When the density of the document of the read area is light, output
image density is increased by control. When the density of the doc-
ument of the read area is dark, output image density is decreased
by control.
When the density of the document of the read area is light, output
image density is increased by control. When the density of the doc-
ument of the read area is dark, output image density is decreased
by control.
14-D
(6)
Document low density image density
reproduction adjustment in the automatic
monochrome (Copy/Scan/FAX) mode
(No need to adjust normally) (Background
density adjustment in the scanning section)
Document low density image density
reproduction adjustment in the automatic
monochrome (Copy/Scan/FAX) mode
(No need to adjust normally) (Background
density adjustment in the scanning section)
Use for the reproducibility adjustment of document background
density in monochrome auto copy mode.
This adjustment is required in the following cases.
• When there is a desire not to reproduce the background of the
density in monochrome auto copy mode.
This adjustment is required in the following cases.
• When there is a desire not to reproduce the background of the
document. When there is a desire to reproduce the low density
image of the document.
image of the document.
• When there is request from the user.
1)
1)
Enter the SIM 46-32 mode.
2)
Select the adjustment mode with the scroll key.
3 to 7mm
3 to 7mm
100mm
100mm
3 to 7mm
Document table/DSPF mode
Document table mode
DSPF mode
AE WIDTH = FULL
AE WIDTH = PART
AE WIDTH = PART
Document density detection area
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man5) service manuals if exist.