Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man31) User Manual / Operation Manual ▷ View online
16
Related topics
• Windows/Display the software selection
screen (common procedure) P.12
• Standard installation P.14
• Custom installation P.18
• Installing others P.24
• Custom installation P.18
• Installing others P.24
Troubleshooting
• Cannot install P.41
• Cannot detect this machine P.42
• How to check the IP address of this
• Cannot detect this machine P.42
• How to check the IP address of this
machine P.45
Advanced installation
1. Display the "Software selection" screen
Refer to "
Windows/Display the software selection screen (common procedure)
P.12
" on how to display the "Software selection" screen.
2. Click the [Printer driver] button
• When installing the PC-Fax Driver, click the [Utility Software...] button,
then click the [PC-Fax Driver] button.
3. Click the [Advanced installation] button
Printers connected to the network are detected.
4. Select this machine, and click the [Next] button
When you click the [Specify conditions] button, you can input the name of this
machine (host name) or IP address, change the time out time, and search.
machine (host name) or IP address, change the time out time, and search.
As a result of the search, if only one instance of this machine is found,
this screen is not displayed.
this screen is not displayed.
STEP 1-4/8
Windows/Display the software selection screen (common procedure)
Printer Driver installation
Advanced installation
17
Related topics
• Standard installation P.14
• Custom installation P.18
• Installing others P.24
• Custom installation P.18
• Installing others P.24
Troubleshooting
• Cannot install P.41
• Cannot detect this machine P.42
• Cannot detect this machine P.42
5. Confirm the content and click the [Next] button
A screen to check the printer driver is displayed.
6. Select the printer driver
Click the checkbox of the printer driver to be installed and select
, then click
the [Next] button.
The screen to configure the printer as a normal printer is displayed.
• When installing the PC-Fax Driver, this screen is not displayed.
7. Select one or the other, and click the [Next] button
When installing multiple printer drivers, choose the printer driver to setup from
the [Default Printer:]. If you do not want either printer to be the normally used
printer, select [No].
the [Default Printer:]. If you do not want either printer to be the normally used
printer, select [No].
8. Follow the instructions on the screen and proceed with
installation
Refer to "
Standard installation P.14
" step 6 onwards.
STEP 5-8/8
Windows/Display the software selection screen (common procedure)
Printer Driver installation
Advanced installation
18
Custom installation
Custom install is used to make detailed configuration. Two ways of installation are explained below:
Even when the printer is not powered up and cannot be searched, you can
install the printer driver by inputting the name (host name) or IP address of
the machine.
install the printer driver by inputting the name (host name) or IP address of
the machine.
Using the IPP function or SSL function to print
Using the IPP function, even when the printer is placed remotely, it can be used as a fax machine
and high quality print is possible. By using the SSL function at the same time, encrypted data can
be sent.
and high quality print is possible. By using the SSL function at the same time, encrypted data can
be sent.
P.19
▶
▶
P.22
▶
▶
Windows/Display the software selection screen (common procedure)
Printer Driver installation
Custom installation
19
Windows/Display the software selection screen (common procedure)
Printer Driver installation
Custom installation
Installing with specified addresses
Related topics
• Windows/Display the software selection
screen (common procedure) P.12
• Using the IPP function or SSL function to
print P.22
Troubleshooting
• Cannot install P.41
• How to check the IP address of this
• How to check the IP address of this
machine P.45
Installing with specified addresses
1. Display the "Software selection" screen
Refer to "
Windows/Display the software selection screen (common procedure)
P.12
" on how to display the "Software selection" screen.
2. Click the [Printer driver] button
• When installing the PC-Fax Driver, click the [Utility Software...] button,
then click the [PC-Fax Driver] button.
3. Click the [Custom installation] button
A screen to check how the printer is connected is displayed.
4. Select [LPR Direct Print (Specify Address)]
Select [LPR Direct Print (Specify Address)], then click the [Next] button.
The address input screen is displayed.
The address input screen is displayed.
5. Input the name of this machine (host name) or IP address
Input the name of this machine (host name) or IP address, then click the [Next]
button.
button.
The model name selection screen is displayed.
STEP 1-5/13
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man31) service manuals if exist.