Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man30) User Manual / Operation Manual ▷ View online
1-7
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
SIDE AND BACK
(1)
LAN connector
Connect the LAN cable to this connector when the
machine is used on a network.
Use a shielded LAN cable.
Connect the LAN cable to this connector when the
machine is used on a network.
Use a shielded LAN cable.
(2)
Extension phone jack (TEL)*
When the fax function of the machine is used, an
extension phone can be connected to this jack.
When the fax function of the machine is used, an
extension phone can be connected to this jack.
(3)
Telephone line jack (LINE)*
When the fax function of the machine is used, the
telephone line is connected to this jack.
When the fax function of the machine is used, the
telephone line is connected to this jack.
(4)
Power plug
* Optional
(1)
(4)
(2)
(3)
1-8
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
OPERATION PANEL
This section describes the names and functions of the respective parts of the operation panel.
(1)
Data notification indicator
The indicator lights solidly or blinks to indicate the status
of a job.
When the Job separator or Exit tray unit (right tray) is
used for output, this blinks until the output is removed.
The indicator lights solidly or blinks to indicate the status
of a job.
When the Job separator or Exit tray unit (right tray) is
used for output, this blinks until the output is removed.
► DATA NOTIFICATION INDICATOR AND ERROR
INDICATOR (page 1-9)
(2)
Touch panel
Messages and keys appear on the touch panel display.
Operate the machine by directly tapping the displayed keys.
Messages and keys appear on the touch panel display.
Operate the machine by directly tapping the displayed keys.
► TOUCH TYPES (page 1-11)
(3)
Error indicator
Lights solidly or blinks to indicate the status of the error.
Lights solidly or blinks to indicate the status of the error.
► DATA NOTIFICATION INDICATOR AND ERROR
INDICATOR (page 1-9)
(4)
Main power indicator
This lamp lights up when the machine's main power switch
is in the “
This lamp lights up when the machine's main power switch
is in the “
” position.
Blinks green during the time that the [Power] button does
not operate immediately after the main power switch is
switched on.
not operate immediately after the main power switch is
switched on.
► TURNING ON THE POWER (page 1-10)
(5)
[Power] button
Use this button to turn the machine's power on and off.
Use this button to turn the machine's power on and off.
► TURNING ON THE POWER (page 1-10)
(6)
[Power Save] button/indicator
Use this button to set the machine to Sleep mode for
energy saving.
[Power Save] button blinks when the machine is in Sleep
Mode.
Use this button to set the machine to Sleep mode for
energy saving.
[Power Save] button blinks when the machine is in Sleep
Mode.
► AUTO POWER SHUT-OFF MODE (page 1-27)
(7)
[Home Screen] key
Use this button to display the home screen.
Use this button to display the home screen.
► HOME SCREEN (page 1-14)
(1)
(2)
(3)
(4)
(5) (6) (7)
[Home Screen] key
Use your finger to touch the [Home Screen] key.
If you use a pen or other tool to touch the key, it may not operate properly.
Risk of malfunctioning if you use with jewelry or other accessories.
Use your finger to touch the [Home Screen] key.
If you use a pen or other tool to touch the key, it may not operate properly.
Risk of malfunctioning if you use with jewelry or other accessories.
You can change the angle of the touch panel.
1-9
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
DATA NOTIFICATION INDICATOR AND ERROR INDICATOR
The data notification indicator and the error indicator lights solidly or blinks to indicate the status of the machine.
Error indicator (red)
Data notification indicator (green)
Pattern 1
Pattern 2
Pattern 3
Solidly
Errors that do not stop machine
operation, such as almost out of toner.
operation, such as almost out of toner.
Job in progress,
such as paper
feeding or output.
such as paper
feeding or output.
Ready state or other
state where jobs can
be accepted.
state where jobs can
be accepted.
An original has been
placed in the
document feeder
placed in the
document feeder
Blinks
Errors that stop machine operation,
such as misfeeds and out of toner.
such as misfeeds and out of toner.
A fax is being received
When the job separator (upper tray) or exit tray unit (right tray) is used for
output, this blinks until the output is removed.
When the job separator (upper tray) or exit tray unit (right tray) is used for
output, this blinks until the output is removed.
To set the status indicated by the data notification indicator
In "Setting mode (administrator)", select [System Settings] → [Common Settings] → [Device Control] → [Status Indicator
Setting].
In "Setting mode (administrator)", select [System Settings] → [Common Settings] → [Device Control] → [Status Indicator
Setting].
1-10
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
TURNING ON THE POWER
This section describes how to turn on/off the machine's power and how to restart the machine.
Operate two power switches: the main power switch inside the front cover, located in the lower left corner, and the
[Power] button on the operation panel.
Operate two power switches: the main power switch inside the front cover, located in the lower left corner, and the
[Power] button on the operation panel.
Turning on the power
• Turn the main power switch to the "
" position.
• When the main power indicator lights in green, press the [Power] button.
Turning off the power
Turn off the power by pressing the [Power] button, then turn the main power switch to the "
" position.
Restart the machine
Turn off the power by pressing the [Power] button and then press it again to turn on the power.
• When turning off the main power switch, press the [Power] button on the operation panel and then turn the main power
switch to the "
" position.
In a sudden case of main power outage, turn the power for the machine back on and then turn it off in the correct order.
If the machine is left for a long time with the main power having been turned off prior to the [Power] button being turned off,
abnormal noises, degraded image quality or other problems may result.
If the machine is left for a long time with the main power having been turned off prior to the [Power] button being turned off,
abnormal noises, degraded image quality or other problems may result.
• Turn off both the [Power] button and the main power switch and unplug the power cord if you suspect a machine failure, if
there is a bad thunderstorm nearby, or when you are moving the machine.
• When using the fax or Internet fax function, always keep the main power switch in the "
" position.
• In order for some settings to take effect, the machine must be restarted. In some states of the machine, restarting with the
[Power] button may not make the settings take effect. In this case, turn off the main power switch and then turn it on again.
Main power indicator
[Power] button
The main power switch
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man30) service manuals if exist.