Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man30) User Manual / Operation Manual ▷ View online
1-2
BEFORE USING THE MACHINE
CHECKING COMPLETED JOBS. . . . . . . . . . . . . . . 1-80
READING THE JOB LIST . . . . . . . . . . . . . . . . . . . . 1-81
ADDRESS BOOK
ADDRESS BOOK. . . . . . . . . . . . . . . . . . . . . . . . . . . 1-84
ADDRESS BOOK SCREEN. . . . . . . . . . . . . . . . . . . 1-84
STORING ADDRESSES THROUGH DIRECT
ENTRY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-87
ENTRY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-87
STORING ADDRESSES THROUGH GLOBAL
ADDRESS SEARCH . . . . . . . . . . . . . . . . . . . . . . . . 1-88
ADDRESS SEARCH . . . . . . . . . . . . . . . . . . . . . . . . 1-88
STORING ADDRESSES FROM FAX OR IMAGE
SEND LOGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-90
SEND LOGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-90
STORING GROUPS . . . . . . . . . . . . . . . . . . . . . . . . . 1-91
EDITING/DELETING ADDRESSES IN ADDRESS
BOOK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-93
BOOK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-93
SETTING THE SCOPE FOR PUBLICIZING
CONTACTS AND GROUPS. . . . . . . . . . . . . . . . . . . 1-95
CONTACTS AND GROUPS. . . . . . . . . . . . . . . . . . . 1-95
DELETING THE TRANSMISSION HISTORY . . . . . 1-96
PERIPHERAL DEVICES
PERIPHERAL DEVICES . . . . . . . . . . . . . . . . . . . . . 1-97
INNER FINISHER . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-99
• PART NAMES . . . . . . . . . . . . . . . . . . . . . . . . . . 1-99
• HOW TO STAPLE MANUALLY. . . . . . . . . . . . . 1-100
• SUPPLIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-101
• INNER FINISHER MAINTENANCE. . . . . . . . . . 1-101
FINISHER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-103
• PART NAMES . . . . . . . . . . . . . . . . . . . . . . . . . . 1-103
• SUPPLIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-104
• FINISHER MAINTENANCE. . . . . . . . . . . . . . . . 1-104
SADDLE STITCH FINISHER . . . . . . . . . . . . . . . . . . 1-106
• PART NAMES . . . . . . . . . . . . . . . . . . . . . . . . . . 1-106
• SUPPLIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-107
• SADDLE STITCH FINISHER MAINTENANCE . . . 1-107
PUNCH MODULE. . . . . . . . . . . . . . . . . . . . . . . . . . . 1-110
• DISCARDING PUNCH WASTE. . . . . . . . . . . . . 1-110
Sharp OSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-114
• APPLICATION COMMUNICATION. . . . . . . . . . 1-114
• EXTERNAL ACCOUNT APPLICATION . . . . . . 1-114
REMOVING MISFEEDS
REMOVING MISFEEDS . . . . . . . . . . . . . . . . . . . . . 1-116
MAINTENANCE
REGULAR MAINTENANCE . . . . . . . . . . . . . . . . . . 1-117
• CLEANING THE DOCUMENT GLASS AND
AUTOMATIC DOCUMENT FEEDER . . . . . . . . 1-117
• CLEANING THE MAIN CHARGER OF THE
PHOTOCONDUCTIVE DRUM . . . . . . . . . . . . . 1-120
• CLEANING THE PT CHARGER OF THE
PRIMARY TRANSFER BELT. . . . . . . . . . . . . . 1-123
• CLEANING THE LASER UNIT. . . . . . . . . . . . . 1-125
• CLEANING THE BYPASS FEED ROLLER . . . 1-128
REPLACEMENT OF TONER CARTRIDGE . . . . . . 1-129
REPLACING THE WASTE TONER BOX . . . . . . . . 1-132
REPLACING THE STAMP CARTRIDGE . . . . . . . . 1-133
CHARACTER ENTRY
NAMES AND FUNCTIONS OF SOFT KEYBOARD
KEYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-135
KEYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-135
1-3
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
PART NAMES AND FUNCTION
EXTERIOR
(1)
Output tray (exit tray cabinet)*
Output is delivered to this tray.
Output is delivered to this tray.
(2)
Job separator tray (upper tray)*
Received faxes and printed papers are delivered to this
tray.
Received faxes and printed papers are delivered to this
tray.
(3)
Automatic document feeder
It automatically feeds and scans multiple originals. 2-sided
originals can be automatically scanned.
It automatically feeds and scans multiple originals. 2-sided
originals can be automatically scanned.
► AUTOMATIC DOCUMENT FEEDER (page 1-70)
(4)
USB port (A type)
This is used to connect a USB device such as a USB
memory device to the machine.
Supports USB 2.0 (Hi-Speed).
This is used to connect a USB device such as a USB
memory device to the machine.
Supports USB 2.0 (Hi-Speed).
(5)
Operation panel
This panel hosts the [Power] button, [Power Save]
button/indicator, error indicator, [Home Screen] button,
main power button, data notification indicator and touch
panel.
Use the touch panel to operate each of these functions.
This panel hosts the [Power] button, [Power Save]
button/indicator, error indicator, [Home Screen] button,
main power button, data notification indicator and touch
panel.
Use the touch panel to operate each of these functions.
► OPERATION PANEL (page 1-8)
(6)
Exit tray unit (right tray)*
Set this tray as the output tray if needed.
Set this tray as the output tray if needed.
(7)
Keyboard
Use this as a substitute for the soft keyboard displayed
on the touch panel. When not being used, it can be
stored under the operation panel.
Use this as a substitute for the soft keyboard displayed
on the touch panel. When not being used, it can be
stored under the operation panel.
(8)
Inner finisher*
This staples paper. A punch module can also be installed
to punch holes in output paper.
This staples paper. A punch module can also be installed
to punch holes in output paper.
► INNER FINISHER (page 1-99)
* Optional
BEFORE USING THE MACHINE
(2)
(7)
(5)
(3)
(4)
(6)
(8)
(1)
1-4
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
(9)
Finisher*
This staples paper. A punch module can also be installed
to punch holes in output paper.
This staples paper. A punch module can also be installed
to punch holes in output paper.
► FINISHER (page 1-103)
(10) Saddle Stitch Finisher*
This staples and folds paper. A punch module can also
be installed to punch holes in output paper.
be installed to punch holes in output paper.
► SADDLE STITCH FINISHER (page 1-106)
(11) Paper pass unit*
Relay between the machine and the finisher or saddle
stitch finisher.
stitch finisher.
(12) Motion sensor
This sensor detects the presence of a person that
approaches the machine, and automatically wakes the
machine from sleep mode (Motion Sensor Mode Only).
approaches the machine, and automatically wakes the
machine from sleep mode (Motion Sensor Mode Only).
(13) Bypass tray
Use this tray to feed paper manually.
When loading paper larger than 8-1/2" x 11"R or A4R,
pull out the extension guide.
When loading paper larger than 8-1/2" x 11"R or A4R,
pull out the extension guide.
► LOADING PAPER INTO THE BYPASS TRAY (page
1-64)
(14) Tray 1
Store paper in this tray.
► TRAY 1 - 4 (when a stand/550/2x550/3x550/
550&2100 sheet paper drawer is installed) (page
1-60)
1-60)
(15) Punch module*
This is used to punch holes in output. Requires an inner
finisher, finisher, or saddle stitch finisher.
finisher, finisher, or saddle stitch finisher.
(16) Front cover
Open this cover to switch the main power switch to "On"
or "Off" to replace a toner cartridge.
or "Off" to replace a toner cartridge.
► TURNING ON THE POWER (page 1-10)
► REPLACEMENT OF TONER CARTRIDGE (page
► REPLACEMENT OF TONER CARTRIDGE (page
1-129)
(17) Tray 3 (when a stand/2x550/3x550 sheet paper
drawer is installed)*
Store paper in this tray.
Store paper in this tray.
► TRAY 1 - 4 (when a stand/550/2x550/3x550/
550&2100 sheet paper drawer is installed) (page 1-60)
(18) Tray 4 (when a stand/3x550 sheet paper drawer is installed)*
Store paper in this tray.
► TRAY 1 - 4 (when a stand/550/2x550/3x550/
550&2100 sheet paper drawer is installed) (page 1-60)
(19) Tray 2 (when a stand/550/2x550/3x550/550&2100
sheet paper drawer is installed)*
Store paper in this tray.
Store paper in this tray.
► TRAY 1 - 4 (when a stand/550/2x550/3x550/
550&2100 sheet paper drawer is installed) (page 1-60)
(20) Tray 4 (when a stand/550&2100 sheet paper drawer is
installed)*
Store paper in this tray.
Store paper in this tray.
► TRAY 3 - 4 (when a stand/550&2100 sheet paper
drawer is installed) (page 1-62)
(21) Tray 3 (when a stand/550&2100 sheet paper drawer is
installed)*
Store paper in this tray.
Store paper in this tray.
► TRAY 3 - 4 (when a stand/550&2100 sheet paper
drawer is installed) (page 1-62)
* Optional
(17)
(15)
(16)
(18)
(19)
(20)
(21)
(11)
(12)
(13)
(14)
(10)
(9)
1-5
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
INTERIOR
(1)
The main power switch
Use this switch to turn on the power for the machine.
When using the fax or Internet fax functions, always keep
this switch in the “
Use this switch to turn on the power for the machine.
When using the fax or Internet fax functions, always keep
this switch in the “
” position.
► TURNING ON THE POWER (page 1-10)
(2)
Toner cartridge
This cartridge contains toner.
When the toner in a cartridge runs out, replace with new
one.
This cartridge contains toner.
When the toner in a cartridge runs out, replace with new
one.
► REPLACEMENT OF TONER CARTRIDGE (page
1-129)
(3)
Waste toner box
This container collects excess toner that remains after
printing.
This container collects excess toner that remains after
printing.
► REPLACING THE WASTE TONER BOX (page
1-132)
(4)
Fusing unit
Heat is applied here to fuse the transferred image onto
the paper.
Heat is applied here to fuse the transferred image onto
the paper.
(5)
Transfer belt
During full color printing, the toner images of the four
colors on the photoconductive drums are combined
together on the transfer belt.
During black and white printing, only the black toner
image is transferred onto the transfer belt.
During full color printing, the toner images of the four
colors on the photoconductive drums are combined
together on the transfer belt.
During black and white printing, only the black toner
image is transferred onto the transfer belt.
(6)
Right side cover
Open this cover to remove a paper misfeed.
Open this cover to remove a paper misfeed.
(7)
Paper reversing section cover
This unit is used for reversing paper when 2-sided printing
is performed. Open this cover to remove a paper misfeed.
This unit is used for reversing paper when 2-sided printing
is performed. Open this cover to remove a paper misfeed.
(8)
Waste toner box release button
Press this button when you need to release the waste
toner box lock to replace the waste toner box or clean the
laser unit.
Press this button when you need to release the waste
toner box lock to replace the waste toner box or clean the
laser unit.
► CLEANING THE LASER UNIT (page 1-125)
► REPLACING THE WASTE TONER BOX (page
► REPLACING THE WASTE TONER BOX (page
1-132)
(9)
Handle
Pull this out and grasp it when moving the machine.
Pull this out and grasp it when moving the machine.
(10) A stand/550/2x550/3x550/550&2100 sheet paper
drawer right-side cover
Open this to remove a paper misfeed in tray 2, 3 and 4.
Open this to remove a paper misfeed in tray 2, 3 and 4.
(11) Paper tray right side cover
Open this to remove a paper misfeed in tray 1.
(12) Right side cover release lever
To remove a paper misfeed, pull and hold this lever up to
open the right side cover.
open the right side cover.
(1)
(3)
(4)
(6)
(7)
(5)
(8)
(9)
(12)
(11)
(10)
(2)
A service technician collects replaced waste toner
box.
box.
The fusing unit is hot. Take care not to burn yourself
when removing a misfeed.
when removing a misfeed.
Do not touch or damage the transfer belt.
This may cause a defective image.
This may cause a defective image.
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man30) service manuals if exist.