Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man170) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., Document Systems Support
○=applied
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
83
Copier
Combination of Repeat Layout and Staple/Punch is now available on
Copier.
○
○
○
○
84
Copier
Correction of starting copy job too slow after starting up MFP or recovering
from power-save mode
○
○
Done
Done
85
Copier
Correction of white streaks on solid black image which may appear when
B/W copy is performed even using SPF
○
○
Done
Done
86
Copier
Correction of machine lockup
MFP
may lock up displaying the message “Please wait.” when using the
following features:
*Copy:"Send and Print"
*Print: "Print and Send (Printer driver)"
○
○
Done
Done
87
Copier
Correction of misdetection of A4R size paper
The size of A4R paper is recognized
as “216x330” when a program
registered in Copy mode is called first and the paper is loaded onto Bypass
tray next.
*On the machine that the phenomenon occurs, please re-register the
program in accordance with the Step(1) and (2) below after the firmware
update.
(1) From Home screen > Tray Settings > Bypass Tray > Detection Size Type
screen, select "A4R".
(2) Re-register Copy Program (and Home screen).
○
○
Done
Done
88
Copier
Improvement of varying first copy time.
The problem occurred because Fuser stopped rotation after completing a
job, causing the overshoot and eventually varying copy time.
○
○
NA
NA
89
Option
Support of UID7-byte which is the new spec of MiFare card
○
○
○
○
90
Option
Support of AirPrint ver1.5
Note: OS used for the evaluation is MAC OS X 10.11.x (El Capitan), iOS9.x.
As of July 2016, although (1) MAC OS X 10.10.x(Yosemite) can be
detected, an error occurs with the operation for the registration.
(2) FAX sending and Scan feature are unavailable from iOS.
○
○
○
○
91
Option
Modification has been made to enable the combination of the custom size
and pamphlet when MX-FN30 (3K finisher) is installed.
○
○
○
○
92
Option
Improvement of the trouble that “LCC_ERR” jam may occur when feeing the
paper from A4LCC.
paper from A4LCC.
○
○
○
○
93
Option
For the support of the data laid out for bookbinding with Saddle Stitch,
"Saddle Stitch (Reverse)" has been added to Staple settings when
MX-FN31 (Saddle Finisher) is installed.
○
○
Done
Done
94
Option
Support of MX-DE29 (Low Stand/550 sheet paper drawer)
○
○
Done
Done
95
Option
Correction of the trouble that only the value that is set to System code1
becomes available when using MX-EC13/SSFC card.
○
○
Done
Done
96
Image Send
Transmission method for scanned data has been expanded for the
connection with "Dropbox" and "box"
○
○
○
○
97
Image Send
Implementation of a feature which enables transmission of Scan To E-mail
data using Gmail account
○
○
○
○
98
Image Send
Implementation of a feature which enables transmission of Scan To E-mail
data to the Microsoft Exchange server
○
○
○
○
Sharp Electronics (UK) Ltd., Document Systems Support
○=applied
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
99
Image Send
Correction of missing one-byte space
The one-byte space cannot be registered as file name used for Scan data
transmission.
○
○
○
○
100 Image Send
Support of SMBv3 which is the latest version of SMB protocol used for Scan
to Network Folder etc.
○
○
○
○
101 Image Send
Modification to change the attribute of the scanned file saved as Encrypted
PDF format to [Confidential]
○
○
○
○
102 Image Send
Change of the detection size/number of detection pages of Multicrop
feature:
*Detection size:
Height: 45mm~297mm ⇒ 40mm~297mm
Width: 80mm~432mm ⇒ 40mm~432mm
*Number of detection pages:
Width: 80mm~432mm ⇒ 40mm~432mm
*Number of detection pages:
30pages => 50pages
○
○
○
○
103 Image Send
Modification has been made to send the image with the margin added for
Spec of FAX to both
FAX destination and Network scanner destination when broadcasting of
FAX and Network scanner.
○
○
Done
Done
104 Image Send
Number of the files attached to one email has been changed from the
multiple files to one file when "If the E-mail attachment(s) exceed maximum
size, it will be sent in multiple files." is enabled and it is the single page
format.
○
○
Done
Done
105 Image Send
Modification has been made to add [Search My Address] key as the
alternative means of [Scan to Me] function. My Address can be set up as
the default address but it is not possible to additionally set up another
address.
*When updating the version from 0201K100_16011400 or earlier version,
the modification will not be reflected.
○
○
Done
Done
106 Image Send
Modification has been made to be able to select the address even if the
address with no use authority is contained in Group Address. However, if
the disabled address is contained, the message to notify that the address
which cannot be sent is included is displayed when pressing Start button.
○
○
Done
Done
107 Image Send
Broadcast of Network scanner and FAX has been changed from parallel
sending to sequential sending. It is sent to FAX destination after the
transmission completion to Network scanner destination.
○
○
Done
Done
108 Image Send
When broadcasting to the network scanner destination whose protocol is
different, the image which has once been processed was sent to all
protocols, but the modification has been made to send the data that the
image has been processed for each protocol.
○
○
Done
Done
109 Image Send
The identifier (Control sequence No.) assigned at the time of broadcasting
was the same for all destinations but the modification has been made to
assign the separate identifier for each destination.
*When updating the version from 0201K100_16011400 or earlier version,
the modification will not be reflected.
○
○
Done
Done
110 Image Send
Implementation of a feature which enables transmission of business card
data file in vCard/csv format scanned on OC using Scanner function.
○
○
Done
Done
111
Image Send
Correction of Scan data transmission in different image quality/ file size:
When scanned data are transmitted in Mono2 mode, turning on and off of
Job Build changes the image quality and file size.
○
○
Done
Done
Sharp Electronics (UK) Ltd., Document Systems Support
○=applied
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
112 Image Send
Correction of failure to perform Multicrop scanning to HTTP and SMB using
OSA which ends up with an error
○
○
Done
Done
113 Image Send
Correction of failure to register output tray
When a Finisher other than Inner Finisher is installed, an error message
appears on the panel when try to switch output tray from Finisher tray to Top
tray in System Settings -> Image Send -> Output tray.
○
○
Done
Done
114 Image Send
Modification to send the data not exceed the upper limit by reducing the
resolution if the divided file size is beyond the upper limit when "If the E-mail
attachment(s) exceed maximum size, it will be sent in multiple files." is
enabled.
○
○
Done
Done
115 Image Send
The resolution was fixed to 300dpi but for the enhancement of the
recognition rate of OCR, the modification has been made to select 300dpi or
400dpi.
NA
NA
○
○
116 Image Send
“Priority Text” feature has been added for the enhancement of the
recognition rate of OCR
recognition rate of OCR
NA
NA
○
○
117 Image Send
Improvement of recognition rate of OCR
NA
NA
○
○
118
UI
Display of the paper weight has been added to Paper Tray/Paper Select
screen on the main unit operation panel.
○
○
○
○
119
UI
Allowing usage of some illegal characters for following purposes according
to the rules on illegal character for Windows 10:
- Directly entry of the path for shared folder
- Entry of file name for Scan to USB
- Direct entry of folder name for new folder
○
○
○
○
120
UI
Change of UI for improvement in operation for stopping Fax job.
○
○
○
○
121
UI
Change of the following designs on UI screen on the operation panel of the
main unit:
*Design of the scroll bar on Preview screen
*Machine image and Cloud icon design
*Design of Job Status button
*OCR icon
*Design of the icon that LAN cable is disconnected
○
○
○
○
122
UI
Change of the description displayed in the setting screen of Saddle Stitch
when Automatic Saddle Stitch setting in System Settings is “OFF”.
○
○
○
○
123
UI
Title of the Flash movie for paper folding on Preview screen has been
changed from “Saddle Fold” to “Fold”.
○
○
○
○
124
UI
Change of UI of Punch function in Simple copy mode:
*Change of icon
*Change of the message when the punch is unavailable
○
○
○
○
125
UI
Currently the preview when scanning OC is disabled but the modification
has been made to enable this feature after scanning all originals.
○
○
○
○
126
UI
Improvement of the performance to display the screen.
○
○
○
○
127
UI
Disabling registration of background screen to avoid issues operating the
panel
User may no longer able to operate the operation panel after changing
background image on Home screen depending on the size of background
data.
An error message will be displayed to reject the registration in System
○
○
○
○
Sharp Electronics (UK) Ltd., Document Systems Support
○=applied
Settings to avoid such trouble.
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
128
UI
Improvement of the visibility of Job Status button by enlarging the text size
etc.
○
○
○
○
129
UI
Change of the indication style of the items that cannot be reset when
printing the retention job:
It was grayed out but it has been modified to be hidden.
○
○
Done
Done
130
UI
File list was displayed on the File Combine screen of Document Filling but
the modification has been made to display only the number of selected files.
○
○
Done
Done
131
UI
Modification not to display the icon showing the storage mode of the file on
Document Filling.
○
○
Done
Done
132
UI
Modification has been made to be unable to select LDAP server as the
target of search on Local Address Book search screen.
○
○
Done
Done
133
UI
Correction of disabling the selection of Paper type for Bypass tray while
“Disabling of Tray Settings” in System Settings is checked
“Disabling of Tray Settings” in System Settings is checked
○
○
Done
Done
134
UI
Correction of inconsistency between file name and thumbnail image
This problem occurs after performing the procedure below:
1. Change display method of pull printing files from thumbnail display to list
display.
2. Display the list in descending order.
3. Set the display method back to thumbnail display.
4. The file name and thumbnail image becomes inconsistent.
○
○
Done
Done
135
UI
Address Book icon is displayed on Home screen when registering the
address, however, the name is occasionally not displayed. This problem
has been corrected.
○
○
Done
Done
136
UI
Correction of lower side of LDAP server authentication screen (for global
address search) and other mode keys being overlapped.
○
○
Done
Done
137
UI
Change of message which prompts user to open the cover at A4 LCC lift up
error as follows:
Old: Tray 5 is ready to open.
New: Open the tray 5.
○
○
Done
Done
138
UI
Message when B/W print is enabled and Color print is disabled has been
changed to "Warming up. Ready for B/W copy" to improve the waiting time
for Mono User.
NA
NA
Done
Done
139
SPN
Addition of the data retrieved in FSS (the items related to data format in
System Settings)
○
○
○
○
140
SPN
Change of the default value of Toner order alert transmission timing control:
SIM27-04 Item M
Old) "0" (Toner order alert call at fixed toner remaining amount)
New) "1" (Toner order alert call at predicted toner consumption amount)
*Note: The initial value above is not changed when updating the firmware in
the field. Please change this setting on an as needed basis.
○
○
Done
Done
141
FAX
Correction of failure to perform proper broadcast transmission
This problem occurs when an address with “I-Fax Reception Report” feature
is selected first and then the address without the feature is selected next.
This problem occurs when an address with “I-Fax Reception Report” feature
is selected first and then the address without the feature is selected next.
○
○
○
○
142
FAX
Change of the status when there is no response from the destination for a
certain period of time on I-FAX from "No Report" to "Report Wait"
○
○
○
○
143
FAX
Correction of displaying incorrect fax image in Preview
This problem may occur when enlarged incoming fax data is displayed in
○
○
○
○
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man170) service manuals if exist.