Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man170) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., Document Systems Support
64
Network
Correction of the problem that the print occasionally cannot be performed
on the machine in wireless connection due to the lockup.
○
○
Done
Done
65
Network
There was no description of Google Cloud printer setting/ Mopria setting/
Collaboration with Cloud in Network setting list. Description above has
been added.
○
○
Done
Done
66
Network
Correction of very rare case with the network connection failure after the
reboot
○
○
Done
Done
67
Network
Correction of the problem that the user fails to re-log in after the lapse of
10hours from his/her first log-in when using Active Directory authentication
○
○
Done
Done
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
68
Network
Correction of the connection error which may be caused during forwarding
the FAX reception data via network
○
○
Done
Done
69
Network
Correction of the problem that the user name cannot be displayed when
logging in using IC card of the user registered to MFP in Active Directory
authentication
○
○
Done
Done
70
Simulation
For Waste Toner Near End Alert MIB, the feature to support the differences
on the behavior depending on OS version has been added to Soft SW:
SIM55-3 SW32 Data 4
0:RFC compliant (Default)
1:RFC non-compliant
○
○
○
○
71
Simulation
Following feature has been added:
- EEPROM data is stored on a regular basis, and
- Backup data is restored to EEPROM with SIM56-15 when the problem
occurs.
○
○
○
○
72
Simulation
Correction of the problem that Auto Paper Selection does not work right
after shifting to the SIM test mode
○
○
○
○
73
Simulation
Correction of the following problem:
If the service password check to enter the simulation is set up (Sim26-79 B
0→1), when U2-XX trouble relating to the authentication occurs, the
operator may not be able to enter the simulation and the trouble cannot be
0→1), when U2-XX trouble relating to the authentication occurs, the
operator may not be able to enter the simulation and the trouble cannot be
cleared.
○
○
○
○
74
Simulation
Wordings for other languages than Japanese/English in SIM language list
have been partly corrected.
○
○
○
○
75
Simulation
Correction of failure to output List Print
○
○
○
○
76
Simulation
Modification has been made to detect the damage in the filling area and
notify the damage as E7-03 (Sub code: 0x14) trouble.
*When E7-03 (Sub code: 0x14) trouble occurs, the filling area can be
recovered by formatting the filling area with SIM62-11. However, the filling
data itself cannot be restored.
○
○
Done
Done
77
Simulation
Addition of the staple position adjustment feature for Saddle Stitch
SIM3-10
Saddle Stitch position adjustment All sizes
Saddle Fold position adjustment All sizes
○
○
Done
Done
78
Simulation
Correction of failure to recover from an ASIC error
An error with ASIC is indicated after firmware upgrade on rare occasions.
The MFP won’t recover unless Flash ROM is replaced.
The MFP won’t recover unless Flash ROM is replaced.
○
○
Done
Done
79
Simulation
Addition of PRINTER CONTROL feature to SIM26-03 (Auditor setting)
○
○
Done
Done
80
Simulation
Addition of the item of density adjustment timing to SIM44-28
○
○
Done
Done
○=applied
Sharp Electronics (UK) Ltd., Document Systems Support
81
Simulation
Mode to display a message for cleaning of Main charger (for 30/35/40 PPM
model) has been added:
SIM44-28
AP: MC_CLEAN_DISP
0: Disable (Default)
1: Enable
0: Disable (Default)
1: Enable
○
○
NA
NA
82
Copier
Correction of the following problem:
When performing the copy in Landscape with Rotation Copy being disabled,
the output result of the image may be rotated 180-degree.
○
○
○
○
Sharp Electronics (UK) Ltd., Document Systems Support
○=applied
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
83
Copier
Combination of Repeat Layout and Staple/Punch is now available on
Copier.
○
○
○
○
84
Copier
Correction of starting copy job too slow after starting up MFP or recovering
from power-save mode
○
○
Done
Done
85
Copier
Correction of white streaks on solid black image which may appear when
B/W copy is performed even using SPF
○
○
Done
Done
86
Copier
Correction of machine lockup
MFP
may lock up displaying the message “Please wait.” when using the
following features:
*Copy:"Send and Print"
*Print: "Print and Send (Printer driver)"
○
○
Done
Done
87
Copier
Correction of misdetection of A4R size paper
The size of A4R paper is recognized
as “216x330” when a program
registered in Copy mode is called first and the paper is loaded onto Bypass
tray next.
*On the machine that the phenomenon occurs, please re-register the
program in accordance with the Step(1) and (2) below after the firmware
update.
(1) From Home screen > Tray Settings > Bypass Tray > Detection Size Type
screen, select "A4R".
(2) Re-register Copy Program (and Home screen).
○
○
Done
Done
88
Copier
Improvement of varying first copy time.
The problem occurred because Fuser stopped rotation after completing a
job, causing the overshoot and eventually varying copy time.
○
○
NA
NA
89
Option
Support of UID7-byte which is the new spec of MiFare card
○
○
○
○
90
Option
Support of AirPrint ver1.5
Note: OS used for the evaluation is MAC OS X 10.11.x (El Capitan), iOS9.x.
As of July 2016, although (1) MAC OS X 10.10.x(Yosemite) can be
detected, an error occurs with the operation for the registration.
(2) FAX sending and Scan feature are unavailable from iOS.
○
○
○
○
91
Option
Modification has been made to enable the combination of the custom size
and pamphlet when MX-FN30 (3K finisher) is installed.
○
○
○
○
92
Option
Improvement of the trouble that “LCC_ERR” jam may occur when feeing the
paper from A4LCC.
paper from A4LCC.
○
○
○
○
93
Option
For the support of the data laid out for bookbinding with Saddle Stitch,
"Saddle Stitch (Reverse)" has been added to Staple settings when
MX-FN31 (Saddle Finisher) is installed.
○
○
Done
Done
94
Option
Support of MX-DE29 (Low Stand/550 sheet paper drawer)
○
○
Done
Done
95
Option
Correction of the trouble that only the value that is set to System code1
becomes available when using MX-EC13/SSFC card.
○
○
Done
Done
96
Image Send
Transmission method for scanned data has been expanded for the
connection with "Dropbox" and "box"
○
○
○
○
97
Image Send
Implementation of a feature which enables transmission of Scan To E-mail
data using Gmail account
○
○
○
○
98
Image Send
Implementation of a feature which enables transmission of Scan To E-mail
data to the Microsoft Exchange server
○
○
○
○
Sharp Electronics (UK) Ltd., Document Systems Support
○=applied
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
99
Image Send
Correction of missing one-byte space
The one-byte space cannot be registered as file name used for Scan data
transmission.
○
○
○
○
100 Image Send
Support of SMBv3 which is the latest version of SMB protocol used for Scan
to Network Folder etc.
○
○
○
○
101 Image Send
Modification to change the attribute of the scanned file saved as Encrypted
PDF format to [Confidential]
○
○
○
○
102 Image Send
Change of the detection size/number of detection pages of Multicrop
feature:
*Detection size:
Height: 45mm~297mm ⇒ 40mm~297mm
Width: 80mm~432mm ⇒ 40mm~432mm
*Number of detection pages:
Width: 80mm~432mm ⇒ 40mm~432mm
*Number of detection pages:
30pages => 50pages
○
○
○
○
103 Image Send
Modification has been made to send the image with the margin added for
Spec of FAX to both
FAX destination and Network scanner destination when broadcasting of
FAX and Network scanner.
○
○
Done
Done
104 Image Send
Number of the files attached to one email has been changed from the
multiple files to one file when "If the E-mail attachment(s) exceed maximum
size, it will be sent in multiple files." is enabled and it is the single page
format.
○
○
Done
Done
105 Image Send
Modification has been made to add [Search My Address] key as the
alternative means of [Scan to Me] function. My Address can be set up as
the default address but it is not possible to additionally set up another
address.
*When updating the version from 0201K100_16011400 or earlier version,
the modification will not be reflected.
○
○
Done
Done
106 Image Send
Modification has been made to be able to select the address even if the
address with no use authority is contained in Group Address. However, if
the disabled address is contained, the message to notify that the address
which cannot be sent is included is displayed when pressing Start button.
○
○
Done
Done
107 Image Send
Broadcast of Network scanner and FAX has been changed from parallel
sending to sequential sending. It is sent to FAX destination after the
transmission completion to Network scanner destination.
○
○
Done
Done
108 Image Send
When broadcasting to the network scanner destination whose protocol is
different, the image which has once been processed was sent to all
protocols, but the modification has been made to send the data that the
image has been processed for each protocol.
○
○
Done
Done
109 Image Send
The identifier (Control sequence No.) assigned at the time of broadcasting
was the same for all destinations but the modification has been made to
assign the separate identifier for each destination.
*When updating the version from 0201K100_16011400 or earlier version,
the modification will not be reflected.
○
○
Done
Done
110 Image Send
Implementation of a feature which enables transmission of business card
data file in vCard/csv format scanned on OC using Scanner function.
○
○
Done
Done
111
Image Send
Correction of Scan data transmission in different image quality/ file size:
When scanned data are transmitted in Mono2 mode, turning on and off of
Job Build changes the image quality and file size.
○
○
Done
Done
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man170) service manuals if exist.