Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man170) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., Document Systems Support
selecting the folder.
51
Network
Correction of the following problem:
If the file is repeatedly uploaded to OneDrive, the error message is displayed
after the start of transmission, and then the transmission may fail.
○
○
○
○
52
Network
Selection of 300dpi or 400dpi is available as the resolution if
DOCX/XLSX/PPTX format is selected when using the scanner function
○
○
○
○
53
Network
Specification for GoogleDrive, OneDrive, SharePoint, and Online has been
expanded.
○
○
○
○
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
54
Network
Following measurements have been done on transferring Address Book:
*Add the Admin password of the forwarding machine to the item of entry.
*Add the topic of “Forward Destination Information” to the setting screen.
*Add the topic of “Forward Destination Information” to the setting screen.
○
○
○
○
55
Network
Execution of timed-deletion of auto-registered user
This has been executed for auto-registered OSA user but will also be
executed for other auto-registered user.
○
○
○
○
56
Network
Correction of user being able to login without password in offline mode
This problem occurs under the conditions below:
- User authentication using Active Directly is enabled.
- Password is not cached.
○
○
○
○
57
Network
Correction of the problem that Single Sign-On does not work when the
external authentication is working with Google drive/ Gmail/Exchange
E-mail etc.
○
○
○
○
58
Network
Modification to add “Enable/Disable of Google Drive” setting to Cloud
Connect Settings in System Settings so that it is possible to disable Google
Connect Settings in System Settings so that it is possible to disable Google
drive.
The default setting is “Disable” so please change the setting to “Enable”
when using Google Drive.
The default setting is “Disable” so please change the setting to “Enable”
when using Google Drive.
○
○
○
○
59
Network
Correction of disappearance of buttons on the Home screen
Login with IC card will erase the buttons on Home screen if executed under
the conditions listed below:
- Active Directly is used as LDAP server.
- User authentication with ID card is enabled.
- There is a user is logging in the MFP but another user logged in with the IC
card that present user logged off automatically.
○
○
Done
Done
60
Network
Correction of incorrect classification of the letter “Ö”
When narrowing down the address by initial in the Address Book, Å and Ä
are classified as “A”. On the other hand, Ö is classified as “ALL”
instead of “O”.
Modification is made so that the letter “Ö” classified as "O".
○
○
Done
Done
61
Network
Correction of failure to turn off/on the feature for total count display after
login
This problem occurs under following conditions:
- User authentication is enabled.
- Active Directory is set as authentication system.
○
○
Done
Done
62
Network
Correction of error with data transmission using SMB due to not ignoring the
invalid format of domain name
○
○
Done
Done
63
Network
Correction of failure to execute auto user registration
Execution of auto user registration may not get rid of the oldest user while
maximum number of user is registered that auto user registration fails.
○
○
Done
Done
○=applied
Sharp Electronics (UK) Ltd., Document Systems Support
64
Network
Correction of the problem that the print occasionally cannot be performed
on the machine in wireless connection due to the lockup.
○
○
Done
Done
65
Network
There was no description of Google Cloud printer setting/ Mopria setting/
Collaboration with Cloud in Network setting list. Description above has
been added.
○
○
Done
Done
66
Network
Correction of very rare case with the network connection failure after the
reboot
○
○
Done
Done
67
Network
Correction of the problem that the user fails to re-log in after the lapse of
10hours from his/her first log-in when using Active Directory authentication
○
○
Done
Done
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
68
Network
Correction of the connection error which may be caused during forwarding
the FAX reception data via network
○
○
Done
Done
69
Network
Correction of the problem that the user name cannot be displayed when
logging in using IC card of the user registered to MFP in Active Directory
authentication
○
○
Done
Done
70
Simulation
For Waste Toner Near End Alert MIB, the feature to support the differences
on the behavior depending on OS version has been added to Soft SW:
SIM55-3 SW32 Data 4
0:RFC compliant (Default)
1:RFC non-compliant
○
○
○
○
71
Simulation
Following feature has been added:
- EEPROM data is stored on a regular basis, and
- Backup data is restored to EEPROM with SIM56-15 when the problem
occurs.
○
○
○
○
72
Simulation
Correction of the problem that Auto Paper Selection does not work right
after shifting to the SIM test mode
○
○
○
○
73
Simulation
Correction of the following problem:
If the service password check to enter the simulation is set up (Sim26-79 B
0→1), when U2-XX trouble relating to the authentication occurs, the
operator may not be able to enter the simulation and the trouble cannot be
0→1), when U2-XX trouble relating to the authentication occurs, the
operator may not be able to enter the simulation and the trouble cannot be
cleared.
○
○
○
○
74
Simulation
Wordings for other languages than Japanese/English in SIM language list
have been partly corrected.
○
○
○
○
75
Simulation
Correction of failure to output List Print
○
○
○
○
76
Simulation
Modification has been made to detect the damage in the filling area and
notify the damage as E7-03 (Sub code: 0x14) trouble.
*When E7-03 (Sub code: 0x14) trouble occurs, the filling area can be
recovered by formatting the filling area with SIM62-11. However, the filling
data itself cannot be restored.
○
○
Done
Done
77
Simulation
Addition of the staple position adjustment feature for Saddle Stitch
SIM3-10
Saddle Stitch position adjustment All sizes
Saddle Fold position adjustment All sizes
○
○
Done
Done
78
Simulation
Correction of failure to recover from an ASIC error
An error with ASIC is indicated after firmware upgrade on rare occasions.
The MFP won’t recover unless Flash ROM is replaced.
The MFP won’t recover unless Flash ROM is replaced.
○
○
Done
Done
79
Simulation
Addition of PRINTER CONTROL feature to SIM26-03 (Auditor setting)
○
○
Done
Done
80
Simulation
Addition of the item of density adjustment timing to SIM44-28
○
○
Done
Done
○=applied
Sharp Electronics (UK) Ltd., Document Systems Support
81
Simulation
Mode to display a message for cleaning of Main charger (for 30/35/40 PPM
model) has been added:
SIM44-28
AP: MC_CLEAN_DISP
0: Disable (Default)
1: Enable
0: Disable (Default)
1: Enable
○
○
NA
NA
82
Copier
Correction of the following problem:
When performing the copy in Landscape with Rotation Copy being disabled,
the output result of the image may be rotated 180-degree.
○
○
○
○
Sharp Electronics (UK) Ltd., Document Systems Support
○=applied
No.
Item
Description
Model
MX-3050N
MX-3550N
MX-4050N
MX-3550N
MX-4050N
MX-3060N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-3560N
MX-4060N
MX-3070N
MX-3570N
MX-4070N
MX-5050N
MX-6050N
MX-6050N
MX-5070N
MX-6070N
MX-6070N
83
Copier
Combination of Repeat Layout and Staple/Punch is now available on
Copier.
○
○
○
○
84
Copier
Correction of starting copy job too slow after starting up MFP or recovering
from power-save mode
○
○
Done
Done
85
Copier
Correction of white streaks on solid black image which may appear when
B/W copy is performed even using SPF
○
○
Done
Done
86
Copier
Correction of machine lockup
MFP
may lock up displaying the message “Please wait.” when using the
following features:
*Copy:"Send and Print"
*Print: "Print and Send (Printer driver)"
○
○
Done
Done
87
Copier
Correction of misdetection of A4R size paper
The size of A4R paper is recognized
as “216x330” when a program
registered in Copy mode is called first and the paper is loaded onto Bypass
tray next.
*On the machine that the phenomenon occurs, please re-register the
program in accordance with the Step(1) and (2) below after the firmware
update.
(1) From Home screen > Tray Settings > Bypass Tray > Detection Size Type
screen, select "A4R".
(2) Re-register Copy Program (and Home screen).
○
○
Done
Done
88
Copier
Improvement of varying first copy time.
The problem occurred because Fuser stopped rotation after completing a
job, causing the overshoot and eventually varying copy time.
○
○
NA
NA
89
Option
Support of UID7-byte which is the new spec of MiFare card
○
○
○
○
90
Option
Support of AirPrint ver1.5
Note: OS used for the evaluation is MAC OS X 10.11.x (El Capitan), iOS9.x.
As of July 2016, although (1) MAC OS X 10.10.x(Yosemite) can be
detected, an error occurs with the operation for the registration.
(2) FAX sending and Scan feature are unavailable from iOS.
○
○
○
○
91
Option
Modification has been made to enable the combination of the custom size
and pamphlet when MX-FN30 (3K finisher) is installed.
○
○
○
○
92
Option
Improvement of the trouble that “LCC_ERR” jam may occur when feeing the
paper from A4LCC.
paper from A4LCC.
○
○
○
○
93
Option
For the support of the data laid out for bookbinding with Saddle Stitch,
"Saddle Stitch (Reverse)" has been added to Staple settings when
MX-FN31 (Saddle Finisher) is installed.
○
○
Done
Done
94
Option
Support of MX-DE29 (Low Stand/550 sheet paper drawer)
○
○
Done
Done
95
Option
Correction of the trouble that only the value that is set to System code1
becomes available when using MX-EC13/SSFC card.
○
○
Done
Done
96
Image Send
Transmission method for scanned data has been expanded for the
connection with "Dropbox" and "box"
○
○
○
○
97
Image Send
Implementation of a feature which enables transmission of Scan To E-mail
data using Gmail account
○
○
○
○
98
Image Send
Implementation of a feature which enables transmission of Scan To E-mail
data to the Microsoft Exchange server
○
○
○
○
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man170) service manuals if exist.