DOWNLOAD Sharp MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man150) Service Manual ↓ Size: 139.04 KB | Pages: 3 in PDF or view online for FREE

Model
MX-2640N MX-2640NR MX-2640FN MX-3140N MX-3140NR MX-3140FN MX-3640N MX-3640NR MX-3640FN (serv.man150)
Pages
3 Few pages! See other manuals at the bottom of the first or last page.
Size
139.04 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / CCE-1319 ROM UPGRADE (9)ICUM ICU v0400A200 PCU v0403G200 SCU v0200A200 Bulletin Only
File
mx-2640n-mx-2640nr-mx-2640fn-mx-3140n-mx-3140nr-mx.pdf
Date

Sharp MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man150) Service Manual / Technical Bulletin ▷ View online

 
 
                                              Sharp Electronics (UK) Ltd., Document Systems Support 
 
 
1/3 
 
Date:  
 
10
th
 June 2014 
Model:   
 
See below 
Ref.:   
 
CCE-1319 
Colour:   
 
White 
Page: 
 
1 of 3 
TECHNICAL BULLETIN 
ROM UPGRADE ..... (9). 
 
1. Model Name: 
MX-2640N/3140N/3640N (Except for Taiwan) 
 
2. Description: 
Upgrade of ICUM, ICU, PCU, and SCU-ROM 
From mid-May 2014 production 
ROM Control No 
ICUM 
ICU 
PCU 
SCU 
FAX 
E-Manual 
D00 
0400A200 
0400A200 
0403G200 
0200A200 
0101G100 
0140A200 
  * ICUM above is the version described in the ROM management label. Check that the actual   
    version is: ICUM(MAIN): 04.00.A2.00/ICUM(SUB): 04.00.A2.00/LANGUAGE: 01.42.S1.00/ 
    UICONTENTS: 04.00.A2.00/PCL(PROFILE): 01.00.A2.00 in SIM22-5. 
    ICU is also the version described in the ROM management label. Check that the actual version   
    is: ICU(MAIN): 04.00.A2.00/ICU(BOOT): 01.01.A2.00/ICU(SUB): 01.05.A2.0a in SIM22-5. 
    Item of change: See the attached sheets.   
 
 
 
 
ROM Version Combination History Table 
No. 
ROM 
Control No. 
ICUM 
ICU 
PCU 
SCU 
FAX 
E-Manual 
Action 
T/R No 
(8) 
C00 
0300A200  0300A200  0402G200  0100A200  0101G100  0140A200  2013/12Mid  CCE-1254 
(7) 
B02 
0210A200  0200A200  0401G200  0100A200  0101G100  0130A200  2013/9Mid  CCE-1191 
(6) 
B01 
0201A200  0200A200  0305G200  0100A200  0101G100  0130A200  2013/7Mid  CCE-1172 
(5) 
B00 
0200A200  0200A200  0305G200  0100A200  0101G100  0130A200  2013/7Mid  CCE-1162 
(4) 
A03 
0120A20a  0120A200  0201G200  0100A200  0101G100  0110A200  2013/2Mid 
CCE-1127 
(3) 
A03 
0120A20a  0120A200  0201G200  0100A200  0101G100  0110A200  2013/2Mid 
(2) 
A02 
0101A200  0100A200  0201G200  0100A200  0101G100  0110A200  2012/12Mid  CCE-1108 
(1) 
A01 
0100A20a  0100A200  0201G200  0100A200  0101G100  0110A200  2012/11Mid  CCE-1103 
 
 
 
 
                                          Sharp Electronics (UK) Ltd., Document Systems Support 
 
2/3 
[Description] 
No. 
Item 
Details 
Main unit control 
Modification of the problem that E7-03, U2-50/60 trouble may occur at the time of startup 
and recovering from Power Save Mode.   
Main unit control 
When obtaining the start-up image (Snapshot) at the time of firmware update, a part of 
the required data cannot be retrieved and the machine may not be able to work correctly. 
Main unit control 
Modification of the problem that the module controlling the real time clock (RTC) in ICU 
cannot start up correctly, which leads to the phenomena that the machine does not enter 
Ready state or locks up etc. 
Main unit control 
Modification of the problems that FAX receiving may stop after reaching to the preset 
limit or the job may disappear when printing because the internal processing at the time 
of job completion cannot work correctly. 
Main unit control 
Modification of an occasional failure to update the information on Tray Settings 
Main unit control 
Modification of the problem that CN update mode is displayed when turning on the main 
switch and the machine may be unable to start up correctly. 
Main unit control 
Modification of the problem that the scan job internally remains when enabling Eco Scan 
Setting and then perform the cancel operation after copy preview. 
Main unit control 
When making Group Registration in Address Book, the address registered to Group is 
occasionally removed from Group.    This problem has been corrected. 
Main unit control 
Modification of the problem that L8-20 trouble may occur in the environment that is 
printing from PC with USB connected. 
10  OSA 
Modification of the problem that the error occurs when starting up FAX OSA application 
after recovering from Energy Save. 
11 
OSA 
 
Modification of the problem that “Automatically print stored jobs after login” feature set 
up by User Control does not function when using OSA external authentication. 
12  OSA 
Modification of the problem that the notification of FAX event differs between OSA4.5 and 
OSA4.1. 
13  OSA 
Modification of a defect in OSA external authentication: When a copy job is stopped for 
reaching to the limit, the job restarts once the information is checked. 
14  UI 
Modification of the problem that the set item 
of “B/W 600dpi x 600dpi Scanning Mode for 
Document Feeder” is not displayed. 
15  UI 
Modification of the problem that the applicable job remains in Job Status after USB 
Direct Print and it cannot even be deleted.     
16  UI 
Modification of the problem that a part of the screen may not be displayed when 
recovering from Energy Save. 
17  Copy 
Modification of PPD2_PRI jam: 
The paper jam occurs during a Copy job when original size is directly entered by setting 
larger size in X direction and smaller size in Y direction and "Repeat Layout" is set using 
large size paper such as A3/B4 size paper (ex. 400×30 on A3 size paper) 
18  Image Send 
Modification of a problem with cancelling Fax data transmission: 
If a multiple-page Fax transmission job without ECM is cancelled while transmitting any 
page other than last page, the cancellation is not processed properly that following Fax 
and Scanner job does not start. 
19  Image Send 
Modification of the problem that Sender cannot be OFF even though it is OFF on 
PC-FAX driver. 
20  Image Send 
Modification of the problems that other information than the registered information is also 
printed on Network Inbound Routing List and it takes some time to print out the list. 
21  Printer 
Modification of occasional garbled characters or failure to complete the job (The MFP 
keeps displaying "Printing in progress.").   
This problem occurs in case PS printing is performed via USB connection. 
22  Printer 
Modification of the problem that the print result may be missing when printing with 
Custom Size Envelope. 
23  Printer 
Modification of the problems that the machine may lock up / the print failure may occur 
when printing the certain PS file. 
24  Printer 
Modification of the problem that the gradation with the light grey occasionally cannot 
smoothly be printed when printing from InDesign in MacOS10.6.8 environment. 
 
 
 
 
                                        Sharp Electronics (UK) Ltd., Document Systems Support 
 
3/3 
 
No. 
Item 
Details 
25  Printer 
Modification of machine lockup (ex. operation panel does not function) due to the 
unauthorized memory access caused by defective internal management processing in 
WSD module. 
26  Printer 
The modification of garbled images which appear while the data communication speed of 
a device is 10 Mbps. 
27  Printer 
Modification of a communication error which occurs in case the devices with different 
MAC address share same IP address (i.e. load balancer is installed). 
28  Network 
Modification is made so that prompt authentication by a login user is enabled/disabled in 
Soft SW. 
 
SIM55-3 SW No.24 Data3 
0: Enabled (Default for all destinations other than Europe) 
1: Disabled 
29  Option 
When performing the booklet print with 15pages from Mac OSX to the model with 
MX-FN20 installed (15-staple, 4K saddle finisher), only 14-page is output as the booklet 
in some cases. 
30    Others 
Support for the change of CCD maker 
 
Display

Sharp MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man150) Service Manual / Technical Bulletin ▷ Download

  • DOWNLOAD Sharp MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man150) Service Manual ↓ Size: 139.04 KB | Pages: 3 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Technical Bulletin for the Sharp MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man150) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man150) Copying Equipment. Information contained in Sharp MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man150) Service Manual / Technical Bulletin (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.