Sharp MX-2630 (serv.man6) Handy Guide ▷ View online
2/11/2017
MX-2630N Handy Guide NOV’17
Sharp Office Solutions Group
MX-2630N
CR4 Technical Handy Guide
NOVEMBER 2017 [EU]
Product Specification
2
Updated
Watermark Update
42
Output Peripheral Specification
4
EEPROM Handling Procedure
43
Product Options
6
HDD Replacement Procedure
44
Consumables
8
mSATA SSD Replacement Procedure 46
Initial Setup
9
Firmware & Print Driver Revision
47
Updated
Colour Calibration
12
Test Simulation
48
Minimum Call Procedure
14
Trouble Codes
57
Maintenance
15
Image Send Comm. Error Codes
61
Media Support List
20
SCN-MFP PWB Troubleshooting
64
Operating System Support
21
Updated
PCU PWB Replacement Procedure
65
IC Card Reader Installation
22
Sensor Location
66
Wireless LAN Setup
25
Jam Cause Codes
68
Sharp Print Release
32
Repair Hints
72
Firmware Upgrade
35
Document Reference
74
Firmware Recovery
39
Notes
75
E-Manual Update
41
E-Manual Update
41
Notes
75
Notice
This
Handy Guide
is provided for
your convenience — it is not
intended to replace the
Service Manual.
Always refer to the Service Manual or
Support Website for the latest information.
PRODUCT SPECIFICATION
SHARP
Page 2
/75
MX-2630N Handy Guide NOV’17
Sharp Office Solutions Group
GENERAL SPECIFICATION
Type:
Desktop.
Original Paper Size: Max. A3.
Printed Paper Size:
Printed Paper Size:
Tray: SRA3-A5R, Bypass: SRA3-A5R,
Long Paper (Max. 1300 x 320mm).
Long Paper (Max. 1300 x 320mm).
Paper Capacity:
STD: 650 (550-sheet x 1 + 100-sheet
Multi bypass).
MAX: 6,300 (100-sheet Multi bypass
+ 550-sheet x 1) + Tandem Desk
(550-sheet x 1, 1200 + 900 tandem)
+ LCC (3000 sheet).
Multi bypass).
MAX: 6,300 (100-sheet Multi bypass
+ 550-sheet x 1) + Tandem Desk
(550-sheet x 1, 1200 + 900 tandem)
+ LCC (3000 sheet).
Paper Weight:
Tray: 60 gsm-300 gsm
Bypass: 55 gsm-300 gsm.
Bypass: 55 gsm-300 gsm.
Output Capacity:
STD: 250-sheet centre tray,
Opt: MX-TR19 N 100-sheet right
tray
tray
Warm-up Time:
20sec or less,
(via the MFP power switch only).
(via the MFP power switch only).
Operation Panel:
7” Colour WVGA
Motion Sensor:
Not supported.
Resolution:
9,600 (equivalent) x 600 dpi,
600x600dpi (Copy/Printer).
600x600dpi (Copy/Printer).
Memory:
5 GB (STD & Max)
HDD Capacity:
250GB
Duplex:
STD (60 gsm-256 gsm)
Utility Counter:
Supported
Dimensions (WDH): 608 x 650 x 834 mm
Weight:
Weight:
Approx. 79 kg
Machine Life:
1,200K
Monthly Volume:
10-30K, Max 50K
ENVIRONMENTAL
Maximum Power
Consumption:
Consumption:
1.84kW
TEC Value:
1.5 kWh (Measured).
Sound Power Level
(Noise):
(Noise):
Operating: 71db (Operating),
29db (Standby),
29db (Standby),
(measurement with MX-FN28/RB25N/DE27N)
COPIER SPECIFICATION
Copy Speed (Max.): 26 ppm (A4), 15 ppm (A3)
E-Sort / SOPM:
E-Sort / SOPM:
Yes / Yes (Colour and B/W)
First Copy Time:
OC: B/W 4.7sec, Col 6.7sec;
RSPF: B/W 7.6sec, Col 9.7sec.
RSPF: B/W 7.6sec, Col 9.7sec.
Continuous Copy:
Max 9,999
Scan Resolution:
Colour: 600 x 600 dpi,
B/W: 600 x 300 dpi, 600 x 400 dpi /
600 x 600 dpi
B/W: 600 x 300 dpi, 600 x 400 dpi /
600 x 600 dpi
Zoom Range:
25 - 400% (SPF 25 - 200%)
Tandem Copy:
Supported (with CR4 series
MX-2630N - MX-6070N only).
MX-2630N - MX-6070N only).
DOCUMENT FEEDER
Type:
STD: RSPF
Original capacity:
Max 100 sheets (80 gsm)
Scan Speed:
Copy Mode:-
(1 sided): 80opm (B/W), 41opm
(Col)
(2 sided): 25opm (B/W), 20opm
(Col)
Image Send:-
(1 sided): 80 opm (B/W & Colour);
(2 sided): 25 opm (B/W & Colour).
Fax:
(1 sided): 80 opm, (2 sided): 25 opm.
(1 sided): 80opm (B/W), 41opm
(Col)
(2 sided): 25opm (B/W), 20opm
(Col)
Image Send:-
(1 sided): 80 opm (B/W & Colour);
(2 sided): 25 opm (B/W & Colour).
Fax:
(1 sided): 80 opm, (2 sided): 25 opm.
DOCUMENT FILING
Capacity:
10GB (Quick Folder) + 95GB
(Main/Custom Folder)
(Main/Custom Folder)
Quick/Main Folder: Quick Folder:
Max: 10,000 pages or 1000 files
Main/Custom:
Max. 20,000 pages or 3,000 files
Main/Custom:
Max. 20,000 pages or 3,000 files
User Registrations:
1000
Preview Mode:
Supported (Thumbnails including
Advanced Edit Mode).
Advanced Edit Mode).
PRINTER SPECIFICATION
Print Speed (Max.):
26 ppm (A4), 15 ppm (A3)
PDL (Emulation):
STD: PCL6,
Opt: Adobe® PostScript®3 [MX-PK13]
Interface:
USB2.0, 10Base-T / 100Base-TX /
1000BaseT
1000BaseT
Protocol:
TCP/IP (IPv4, IPv6),
Supported OS:
Windows® Vista*, Windows®7*,
Windows® 8.1*, Windows®10*.
Windows® Server 2008* / 2008R2 /
2012 / 2012R2 / 2016 (*32/64bit).
Windows® 8.1*, Windows®10*.
Windows® Server 2008* / 2008R2 /
2012 / 2012R2 / 2016 (*32/64bit).
Mac OS® 10.4, 10.5, 10.6, 10.7, 10.8,
10.9, 10.10, 10.11 , 10.12, 10.13 with
Adobe® PostScript®3 [MX-PK13]
10.9, 10.10, 10.11 , 10.12, 10.13 with
Adobe® PostScript®3 [MX-PK13]
Utility Software
Status Monitor
USB Direct Print
(Pull):
(Pull):
STD: JPEG, TIFF, PRN, PCL, PNG,
PDF, PDF/A, Encrypted PDF, PS with
MX-PK13; DOCX, PPTX & XLSX with
MX-PU10.
MX-PK13; DOCX, PPTX & XLSX with
MX-PU10.
Pantone Support:
From Q1/2018
Sharp Print Release: STD (with MX-2630N-MX-6070N
series only).
Tandem Print:
Supported (with CR4 series
MX-2630N - MX-6070N only).
MX-2630N - MX-6070N only).
SHARP
PRODUCT SPECIFICATION
MX-2630N Handy Guide NOV’17
Sharp Office Solutions Group
Page 3
/75
MOBILE DEVICE
AirPrint™ Support:
Opt: MX-PK13 required.
Google Cloud Print™:
Opt: MX-PK13 required.
Mopria™:
Supported
(via Wireless Access Point
or
MX-EB18
)
Opt: MX-PK13
required.
Android™ Plug-in:
Supported (via Wireless Access Point
or
or
MX-EB18
)
Opt: MX-PK13
required
.
Sharpdesk® Mobile: Supported (via Wireless Access Point
or
MX-EB18
).
Opt: MX-PK13 is
required for full print functionality.
IMAGE SEND MODE
Requirement:
STD
Resolution:
100, 150, 200, 300, 400, 600 dpi
Format:
Mono: TIFF, XPS, PDF, PDF/A-1a,
PDF/A-1b, Encrypted PDF,
Colour: TIFF, XPS, JPEG, PDF, PDF/A-
1a, PDF/A-1b, Encrypted PDF.
PDF/A-1b, Encrypted PDF,
Colour: TIFF, XPS, JPEG, PDF, PDF/A-
1a, PDF/A-1b, Encrypted PDF.
Destination:
Desktop (Sharpdesk), FTP, E-Mail,
SMB Folder, USB, HDD
SMB Folder, USB, HDD
,
TWAIN / WIA compliant,
I-Fax
(SMTP) with MX-FWX1.
Auto-Set Mode:
Not Supported.
User Registrations:
Max 500 (one touch), 500 (group).
Utility Software:
Sharpdesk with Network Scan Tool
(1 user license).
(1 user license).
CLOUD CONNECTORS [SCAN/PRINT]
Microsoft® One
Drive® for Business:
Drive® for Business:
Opt: MX-AMX2 required.
Microsoft® Office
365™ SharePoint®:
365™ SharePoint®:
Opt: MX-AMX2 required.
Google Drive™:
Opt: MX-AMX2 required.
Box™:
Opt: MX-AMX2 required.
EMAIL CONNECTOR
Microsoft® Exchange: STD
Microsoft®
Exchange® Online:
Exchange® Online:
STD
Google Gmail™:
STD
FACSIMILE
Requirement:
Opt: MX-FX15
Communication
Formula:
Formula:
Super G3
TX Speed:
2sec.range(Super G3/JBIG)
6sec.range(G3/ECM)
6sec.range(G3/ECM)
Communication
Line:
Line:
PSTN
Dial Registration:
Max 2000
Document Size:
A3 - A5,
Compression:
MH, MR, MMR, JBIG
Inbound Routing:
Yes (PDF, Single TIFF, Multi TIFF,
XPS) to E-mail, FTP, SMB, Desktop,
XPS) to E-mail, FTP, SMB, Desktop,
Fax & I-Fax.
PC Fax:
Yes (For Windows® only)
WIRELESS LAN
Requirement:
Opt: MX-EB18
Compliant
Regulation:
Regulation:
IEEE802.11n/g/b
Transmission:
IEEE802.11n/g: OFDM;
IEEE802.11b: DSSS
IEEE802.11b: DSSS
Access Mode:
Infrastructure & Software AP modes.
Security:
WEP, WPA/WPA2-mixed PSK,
WPA/WPA2-mixed EAP*,WPA2
PSA,WPA2 EAP* ; * Not applicable to
Software AP mode
WPA/WPA2-mixed EAP*,WPA2
PSA,WPA2 EAP* ; * Not applicable to
Software AP mode
Frequency Channel: IEEE802.11 n/g/b: 2.4 GHz / 1-13ch
Transmission Rate:
Transmission Rate:
IEEE802.11n max 150M bps
IEEE802.11g max. 54M bps
IEEE802.11b max 11 M bps
IEEE802.11g max. 54M bps
IEEE802.11b max 11 M bps
Connections:
Software AP mode: 5 concurrent
connections.
Infrastructure Mode: As defined by
the Access Point/Router
connections.
Infrastructure Mode: As defined by
the Access Point/Router
PERIPHERAL SPECIFICATION
SHARP
Page 4
/75
MX-2630N Handy Guide NOV’17
Sharp Office Solutions Group
MX-TR20
Paper size:
A3 to A5R (Offset only);
SRA3 to A5R (including envelope &
custom size paper)
SRA3 to A5R (including envelope &
custom size paper)
Paper capacity:
100 sheets (Upper tray),
250 sheets (Centre tray)
250 sheets (Centre tray)
Paper weight:
55 gsm to 256 gsm (Upper Tray);
55 gsm to 300 gsm (Centre Tray)
55 gsm to 300 gsm (Centre Tray)
MX-FN27 N
Paper size:
SRA3 to A5 (Non offset),
A3 to B5 (Offset / Staple).
A3 to B5 (Staple-less staple)
A3 to B5 (Offset / Staple).
A3 to B5 (Staple-less staple)
Paper capacity:
500 sheets or 30 sets (A4 or smaller),
250 sheets or 30 sets (B4 or larger).
250 sheets or 30 sets (B4 or larger).
Staple capacity:
50 sheets (A4, B5),
30 sheets (A3, B4, Mixed size);
Max: 300 gsm (2 sheets) + 90 gsm (48
sheets).
30 sheets (A3, B4, Mixed size);
Max: 300 gsm (2 sheets) + 90 gsm (48
sheets).
Staple position:
3 locations (Front slant, Rear slant & 2
staples).
staples).
Staple-less staple: Supported (Rear slant only).
Maximum 5 sheets (A3, A4, B4, B5):-
Up to 5 sheets (64 gsm),
Up to 4 sheets (64-81 gsm),
Up to 3 sheets (81 to 105 gsm).
Up to 5 sheets (64 gsm),
Up to 4 sheets (64-81 gsm),
Up to 3 sheets (81 to 105 gsm).
Manual Staple
Supported (Rear slant only).
Max capacity: 40 sheets (80 gsm).
Max capacity: 40 sheets (80 gsm).
Punch unit:
MX-PN14C:-
2 or 4 holes: A4 / A3;
2 holes only: A4R / B4 / B5.
2 holes only: A4R / B4 / B5.
MX-PN14D:-
4 hole wide: A4 / A3 / B4 / B5.
MX-FN28
Paper size:
SRA3 to A5 (Non offset),
A3W to A5 (Offset),
A3W to B5 (Staple).
A3W to A5 (Offset),
A3W to B5 (Staple).
Paper capacity:
1,000 sheets or 100 stapled sets (A4),
500 sheets or 50 stapled sets (other
sizes);
500 sheets or 50 stapled sets (other
sizes);
Top Tray: 50 sheets (A4 or smaller),
50 sheets (B4 or larger);
50 sheets (B4 or larger);
Staple capacity:
50 sheets (A4, B5), 30 sheets (A3, B4)
Max: 300 gsm (2 sheets) + 90 gsm (48
sheets);
Max: 300 gsm (2 sheets) + 90 gsm (48
sheets);
Staple position:
3 locations (front, rear or 2-point).
Staple-less staple: Not supported.
Manual Staple
Not supported.
Punch unit:
MX-PN15C:-
2 or 4 holes: A4 / A3;
2 holes only: A4R / B4 / B5.
2 holes only: A4R / B4 / B5.
MX-PN15D:-
4 hole wide: A4 / A3 / B4 / B5.
MX-FN29
Paper size:
SRA3 to A5 (Non offset),
A3W to A5 (Offset),
A3W to B5 (Staple).
A3W to A5 (Offset),
A3W to B5 (Staple).
Paper capacity:
1,000 sheets or 100 stapled sets (A4),
500 sheets or 50 stapled sets (other
sizes);
500 sheets or 50 stapled sets (other
sizes);
Top Tray: 50 sheets (A4 or smaller), 50
sheets (B4 or larger);
sheets (B4 or larger);
Saddle: 7 sets of 11–15 sheets, 10 sets of
6–10 sheets, 20 sets of 1–5 sheets.
6–10 sheets, 20 sets of 1–5 sheets.
Staple capacity:
50 sheets (A4, B5), 30 sheets (A3, B4)
Max: 300 gsm (2 sheets) + 90 gsm (48
sheets);
Max: 300 gsm (2 sheets) + 90 gsm (48
sheets);
Saddle: 15 sheets - (Booklet Front cover
up to 220 gsm).
up to 220 gsm).
Staple position:
3 locations (front, rear or 2-point).
Staple-less staple: Not supported.
Manual Staple
Not supported.
Punch unit:
MX-PN15C:-
2 or 4 holes: A4 / A3;
2 holes only: A4R / B4 / B5.
2 holes only: A4R / B4 / B5.
MX-PN15D:-
4 hole wide: A4 / A3 / B4 / B5.
MX-FN30
Paper size:
SRA3 to A5 (Non offset),
A3 to B5 (Offset / Staple),
A3 / A4 (Staple-less).
A3 to B5 (Offset / Staple),
A3 / A4 (Staple-less).
Paper capacity:
3,000 sheets or 200 stapled sets (A4/B5),
1,500 sheets or 100 stapled sets (other
sizes),
1,500 sheets or 100 stapled sets (other
sizes),
200 staple-less staple sets (A4) or
100 staple-less staple sets (A3).
100 staple-less staple sets (A3).
Top Tray: 250 sheets (A4, B5, A5),
125 sheets (other sizes);
125 sheets (other sizes);
Staple capacity:
65 sheets (A4, B5), 30 sheets (other
sizes);
sizes);
Max: 300 gsm (2 sheets) + 90 gsm (63
sheets).
sheets).
Staple position:
3 locations (front, rear or 2-point).
Staple-less staple: Supported (Rear slant only).
Maximum 5 sheets (A3, A4, B4, B5):-
Up to 5 sheets (64 gsm),
Up to 4 sheets (64-81 gsm),
Up to 3 sheets (81 to 105 gsm).
Up to 5 sheets (64 gsm),
Up to 4 sheets (64-81 gsm),
Up to 3 sheets (81 to 105 gsm).
Manual Staple
Supported (Rear slant only).
Max capacity: 65 sheets (80 gsm).
Max capacity: 65 sheets (80 gsm).
Punch unit:
MX-PN16C:-
2 or 4 holes: A4 / A3;
2 holes only: A4R / B4 / B5.
2 holes only: A4R / B4 / B5.
MX-PN16D:-
4 hole wide: A4 / A3 / B4 / B5.