Sharp MX-2614N / MX-3114N (serv.man90) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., Document Systems Support
2/2
[Description]
No.
Item
Details
1
Main unit control
Modification of an occasional failure to update the information on Tray Settings
2
Main unit control
Modification of the problem that L8-20 trouble may occur in the environment that is
printing from PC with USB connected.
printing from PC with USB connected.
3
Main unit control
Enhancement of the secondary transfer output of high-voltage board to remedy the
C4-00 error which occurs under low temperature environment
C4-00 error which occurs under low temperature environment
4
Main unit control
To improve the lines being too thin during the copy in B/W, the laser power correction
control by developer bias has been implemented:
Sim55-1 SW No.9 Data3
0: OFF
1: ON (Factory default)
control by developer bias has been implemented:
Sim55-1 SW No.9 Data3
0: OFF
1: ON (Factory default)
5
OSA
Modification of the problem that the error occurs when starting up FAX OSA application
after recovering from Energy Save.
after recovering from Energy Save.
6
OSA
Modification of the problem that the notification of FAX event differs between OSA4.5 and
OSA4.1.
OSA4.1.
7
Image Send
8
Printer
Modification of a failure to output image with correct color while performing direct print of
particular PDF data which include transparent object. The problem occurs because
conversion processing of color table was not done properly.
particular PDF data which include transparent object. The problem occurs because
conversion processing of color table was not done properly.
9
Printer
Modification of partial void area which may appear while printing monochrome
JPEG-compressed image data.
JPEG-compressed image data.
10 Printer
Modification of printing with different font which may occur when downloaded Truetype
fonts are used for printing.
fonts are used for printing.
11
Printer
Modification of the problem that the print result may be missing when printing with
Custom Size Envelope.
Custom Size Envelope.
12 Printer
Modification of the problems that the machine may lock up / the print failure may occur
when printing the certain PS file.
when printing the certain PS file.
13 Network
Modification of machine lockup (ex. operation panel does not function) due to the
unauthorized memory access caused by defective internal management processing in
WSD module.
unauthorized memory access caused by defective internal management processing in
WSD module.
14 Network
The modification of garbled images which appear while the data communication speed of
a device is 10 Mbps.
a device is 10 Mbps.
15 Network
Modification of a communication error which occurs in case the devices with different
MAC address share same IP address (i.e. load balancer is installed).
MAC address share same IP address (i.e. load balancer is installed).
16 Network
Modification is made so that prompt authentication by a login user is enabled/disabled in
Soft SW.
SIM55-3 SW No.24 Data3
0: Enabled (Default for all destinations other than Europe)
1: Disabled
Soft SW.
SIM55-3 SW No.24 Data3
0: Enabled (Default for all destinations other than Europe)
1: Disabled
17 Others
Support for the change of CCD maker
Sharp Electronics (UK) Ltd., Document Systems Support
2/2
[Description]
No.
Item
Details
1
Main unit control
Modification of an occasional failure to update the information on Tray Settings
2
Main unit control
Modification of the problem that L8-20 trouble may occur in the environment that is
printing from PC with USB connected.
printing from PC with USB connected.
3
Main unit control
Enhancement of the secondary transfer output of high-voltage board to remedy the
C4-00 error which occurs under low temperature environment
C4-00 error which occurs under low temperature environment
4
Main unit control
To improve the lines being too thin during the copy in B/W, the laser power correction
control by developer bias has been implemented:
Sim55-1 SW No.9 Data3
0: OFF
1: ON (Factory default)
control by developer bias has been implemented:
Sim55-1 SW No.9 Data3
0: OFF
1: ON (Factory default)
5
OSA
Modification of the problem that the error occurs when starting up FAX OSA application
after recovering from Energy Save.
after recovering from Energy Save.
6
OSA
Modification of the problem that the notification of FAX event differs between OSA4.5 and
OSA4.1.
OSA4.1.
7
Image Send
8
Printer
Modification of a failure to output image with correct color while performing direct print of
particular PDF data which include transparent object. The problem occurs because
conversion processing of color table was not done properly.
particular PDF data which include transparent object. The problem occurs because
conversion processing of color table was not done properly.
9
Printer
Modification of partial void area which may appear while printing monochrome
JPEG-compressed image data.
JPEG-compressed image data.
10 Printer
Modification of printing with different font which may occur when downloaded Truetype
fonts are used for printing.
fonts are used for printing.
11
Printer
Modification of the problem that the print result may be missing when printing with
Custom Size Envelope.
Custom Size Envelope.
12 Printer
Modification of the problems that the machine may lock up / the print failure may occur
when printing the certain PS file.
when printing the certain PS file.
13 Network
Modification of machine lockup (ex. operation panel does not function) due to the
unauthorized memory access caused by defective internal management processing in
WSD module.
unauthorized memory access caused by defective internal management processing in
WSD module.
14 Network
The modification of garbled images which appear while the data communication speed of
a device is 10 Mbps.
a device is 10 Mbps.
15 Network
Modification of a communication error which occurs in case the devices with different
MAC address share same IP address (i.e. load balancer is installed).
MAC address share same IP address (i.e. load balancer is installed).
16 Network
Modification is made so that prompt authentication by a login user is enabled/disabled in
Soft SW.
SIM55-3 SW No.24 Data3
0: Enabled (Default for all destinations other than Europe)
1: Disabled
Soft SW.
SIM55-3 SW No.24 Data3
0: Enabled (Default for all destinations other than Europe)
1: Disabled
17 Others
Support for the change of CCD maker
Sharp Electronics (UK) Ltd., Document Systems Support
2/2
[Description]
No.
Item
Details
1
Main unit control
Modification of an occasional failure to update the information on Tray Settings
2
Main unit control
Modification of the problem that L8-20 trouble may occur in the environment that is
printing from PC with USB connected.
printing from PC with USB connected.
3
Main unit control
Enhancement of the secondary transfer output of high-voltage board to remedy the
C4-00 error which occurs under low temperature environment
C4-00 error which occurs under low temperature environment
4
Main unit control
To improve the lines being too thin during the copy in B/W, the laser power correction
control by developer bias has been implemented:
Sim55-1 SW No.9 Data3
0: OFF
1: ON (Factory default)
control by developer bias has been implemented:
Sim55-1 SW No.9 Data3
0: OFF
1: ON (Factory default)
5
OSA
Modification of the problem that the error occurs when starting up FAX OSA application
after recovering from Energy Save.
after recovering from Energy Save.
6
OSA
Modification of the problem that the notification of FAX event differs between OSA4.5 and
OSA4.1.
OSA4.1.
7
Image Send
8
Printer
Modification of a failure to output image with correct color while performing direct print of
particular PDF data which include transparent object. The problem occurs because
conversion processing of color table was not done properly.
particular PDF data which include transparent object. The problem occurs because
conversion processing of color table was not done properly.
9
Printer
Modification of partial void area which may appear while printing monochrome
JPEG-compressed image data.
JPEG-compressed image data.
10 Printer
Modification of printing with different font which may occur when downloaded Truetype
fonts are used for printing.
fonts are used for printing.
11
Printer
Modification of the problem that the print result may be missing when printing with
Custom Size Envelope.
Custom Size Envelope.
12 Printer
Modification of the problems that the machine may lock up / the print failure may occur
when printing the certain PS file.
when printing the certain PS file.
13 Network
Modification of machine lockup (ex. operation panel does not function) due to the
unauthorized memory access caused by defective internal management processing in
WSD module.
unauthorized memory access caused by defective internal management processing in
WSD module.
14 Network
The modification of garbled images which appear while the data communication speed of
a device is 10 Mbps.
a device is 10 Mbps.
15 Network
Modification of a communication error which occurs in case the devices with different
MAC address share same IP address (i.e. load balancer is installed).
MAC address share same IP address (i.e. load balancer is installed).
16 Network
Modification is made so that prompt authentication by a login user is enabled/disabled in
Soft SW.
SIM55-3 SW No.24 Data3
0: Enabled (Default for all destinations other than Europe)
1: Disabled
Soft SW.
SIM55-3 SW No.24 Data3
0: Enabled (Default for all destinations other than Europe)
1: Disabled
17 Others
Support for the change of CCD maker
Sharp Electronics (UK) Ltd., Document Systems Support
2/2
[Description]
No.
Item
Details
1
Main unit control
Modification of an occasional failure to update the information on Tray Settings
2
Main unit control
Modification of the problem that L8-20 trouble may occur in the environment that is
printing from PC with USB connected.
printing from PC with USB connected.
3
Main unit control
Enhancement of the secondary transfer output of high-voltage board to remedy the
C4-00 error which occurs under low temperature environment
C4-00 error which occurs under low temperature environment
4
Main unit control
To improve the lines being too thin during the copy in B/W, the laser power correction
control by developer bias has been implemented:
Sim55-1 SW No.9 Data3
0: OFF
1: ON (Factory default)
control by developer bias has been implemented:
Sim55-1 SW No.9 Data3
0: OFF
1: ON (Factory default)
5
OSA
Modification of the problem that the error occurs when starting up FAX OSA application
after recovering from Energy Save.
after recovering from Energy Save.
6
OSA
Modification of the problem that the notification of FAX event differs between OSA4.5 and
OSA4.1.
OSA4.1.
7
Image Send
8
Printer
Modification of a failure to output image with correct color while performing direct print of
particular PDF data which include transparent object. The problem occurs because
conversion processing of color table was not done properly.
particular PDF data which include transparent object. The problem occurs because
conversion processing of color table was not done properly.
9
Printer
Modification of partial void area which may appear while printing monochrome
JPEG-compressed image data.
JPEG-compressed image data.
10 Printer
Modification of printing with different font which may occur when downloaded Truetype
fonts are used for printing.
fonts are used for printing.
11
Printer
Modification of the problem that the print result may be missing when printing with
Custom Size Envelope.
Custom Size Envelope.
12 Printer
Modification of the problems that the machine may lock up / the print failure may occur
when printing the certain PS file.
when printing the certain PS file.
13 Network
Modification of machine lockup (ex. operation panel does not function) due to the
unauthorized memory access caused by defective internal management processing in
WSD module.
unauthorized memory access caused by defective internal management processing in
WSD module.
14 Network
The modification of garbled images which appear while the data communication speed of
a device is 10 Mbps.
a device is 10 Mbps.
15 Network
Modification of a communication error which occurs in case the devices with different
MAC address share same IP address (i.e. load balancer is installed).
MAC address share same IP address (i.e. load balancer is installed).
16 Network
Modification is made so that prompt authentication by a login user is enabled/disabled in
Soft SW.
SIM55-3 SW No.24 Data3
0: Enabled (Default for all destinations other than Europe)
1: Disabled
Soft SW.
SIM55-3 SW No.24 Data3
0: Enabled (Default for all destinations other than Europe)
1: Disabled
17 Others
Support for the change of CCD maker
Display