Sharp MX-2610N / MX-3110N / MX-3610N (serv.man8) Handy Guide ▷ View online
Machine Consumables
9
Document Solutions After Sales Service
Peripherals
MX-SCX1
MX-FN17/10 Finisher Staple Cartridge
5000 staples (x3)
AR-SC3
MX-FN10 Saddle Staple Cartridge
2000 staples (x3)
AR-SV1
RSPF Stamp Cartridge
x2
AR-620RT
Paper Feed Roller Kit
•
Paper Feed Roller
•
Paper Feed Pick Up Roller
•
Paper Separation Roller
100K
Service Rotation Unit
MX-230U1
Primary Transfer Belt Unit
For Service Rotation
MX-230U2
Secondary Transfer Belt Unit
MX-260FU
Fusing Unit for MX2610N – MX3110N (230v)
MX-360FU
Fusing Unit for MX3610N (230v)
Note 1: The consumable life may vary, depending on document density, temperature, humidity and machine
operation.
*: When fitting a MX-360FB to the fuser unit ensure soft SW settings are set correctly
The setting change procedure and the setting values for the SOFT SW are as follows.
1) Enter the Sim 55-1 "ENGINE SOFT SW SETTING" mode.
2) Input "17" into the SW No. field.
3) Set the setting value of the 3rd and 4th digits of the DATA as 200K cycle.
- 100K : 11
11
0000 - 200K : 11
00
0000
Initial Set-up
10
Document Solutions After Sales Service
DEVELOPER INSTALLATION
Sim 25-02
Auto Developer Adjustment
Select CMYK
Note: Toner Installation should be performed after
Auto Developer Adjustment is completed
For Optimum Image Quality it is recommended to
install developer at the customer site
Auto Developer Adjustment is completed
For Optimum Image Quality it is recommended to
install developer at the customer site
INITIAL SETTINGS
Sim 26-06
Machine Destination Set
Sim 26-52
Blank Paper Count Mode Setting (Non Print)
Sim 26-65
Finisher Alarm mode
Select Staple sheet limit (30 or 50)
Staple copies/sets limit (ON/OFF)
Sim 26-01
Right Tray Installation
Yes/No.
Sim 26-35
Set Multi Error Counter
Set to 1 (Multi Count).
Sim 26-78
Remote Desktop Access Password set.
CASSETTE SETUP & PAPER TYPE
Set cassette size by adjusting the guides in the cassette.
Paper Size & Type Setting:- System Settings – Paper Tray Settings
IMAGE WRITING DISTORTION – CMYK
SIM 50-22
Image Writing Adjustment
PRINT IMAGE MAGNIFICATION & OFF CENTRE
Automatic Adjustment:
Sim 50-28
BK MAG ADJUST (Magnification)
SETUP/PRINT ADJ (Offset)
Normally no need to adjust as set in factory
Initial Set-up
11
Document Solutions After Sales Service
COPY IMAGE POSITION & VOID
Automatic Adjustment:
Sim 50-28
OC ADJUST (Platen)
SPF ADJUST
Normally no need to adjust as set in factory
RSPF & DSPF IMAGE POSITION & VOID
Automatic Adjustment:
Sim 50-28
OC ADJUST (Platen)
SPF ADJUST
Normally no need to adjust as set in factory
HALF-TONE - COLOUR CALIBRATION
Copy/Engine:
Sim 46-74
Automatic Colour Calibration
Please refer to Page 12 for Calibration Procedure.
This Must Be Completed In Full
FAX OPTION (MX-FX11)
Sim 66-02
Fax SW Setting (Destination)
Sim 66-39
Fax Destination Set
Sim 66-10
Fax Memory Clear (For Standard Extended Memory)
Initial Set-up
12
Document Solutions After Sales Service
MFP Status Display
Sim 55-03
Toner Remaining Status Display
SSW22, Data/Bit 5 (Change from 0-1)
SSW22, Data/Bit 5 (Change from 0-1)
Product Activation & Firmware
Activation of Optional Products:
System Settings – Administrator Mode – Product Key
Sim 22-05
Check Firmware version – Upgrade to latest version.
OTHER
Sim 22-06
Print All Simulation Data
System Settings
Adjust Clock (Set Time, Time Zone &
Date)
Device Clone & Storage Backup
Backup System Settings, Scan
Destinations, User Control, OSA
Configuration after customer
installation is complete.
Click on the first or last page to see other MX-2610N / MX-3110N / MX-3610N (serv.man8) service manuals if exist.