DOWNLOAD Sharp MX-2610N / MX-3110N / MX-3610N (serv.man195) Service Manual ↓ Size: 98.13 KB | Pages: 2 in PDF or view online for FREE

 

Sharp Electronics (UK) Ltd., Technical Services Group

 

CCE-976 

 

1. Model Name:  MX-FR30U(Options for MX-2610N/3110N/3610N) 

 

2. Description:  Upgrade of ICU-ROM 

 

From November 2011 Production 

ROM control No. 

ICU 

E00 

0400Ac 

 * ICU above is the version described in the ROM management label.  Check that the actual 
  version is: ICU(MAIN): 04.00.Ac.00/ICU(BOOT): 01.00.Ac.00/LANGUAGE: 01.41.A1.00/ 
  GRAPHIC: 01.00.A1.00/UICONTENTS: 04.00.Ac.00/PCL(MAIN): 04.00.A1.00; by Sim22-5. 

  Item of change: See the attached sheet 
 Note) This report is a T/R for the data security kit option, corresponding to general 
       T/R No. CCE-960 

 

 

 

 

 

ROM Version Combination History Table 

 

No.  ROM control No. 

ICU 

Action 

T/R No. 

(3) 

D00 

0300Ac 

2011/9 

CCE-953 

(2) 

C00 

0200Ac 

2011/7 

CCE-935 

(1) 

B00 

0110Ac 

2011/4 

CCE-903 

 

 

TECHNICAL BULLETIN 

 

Sharp Electronics (UK) Ltd., Technical Services Group

 

CCE-976 

[Description] 

No. 

Item 

Details 

1  UI  

When displaying the icon of the maintenance information, if it conflicted with other icon 
displaying condition like the icon of "Processing print data" etc, the icons were displayed 
by switching back and force.  Now it has been modified to display the icon of the 
maintenance information all the time until the maintenance procedure is completed.   

2  Document Filling  

There was a case where the B/W data in Document Filling could not be printed from 
"Document Operations" on the Web screen with the user authority that the color print of 
Document Filling was disabled.  This problem has been corrected.   

3  Document Filling 

After the several retention prints, when confirming the print job from the main unit of MFP 
and then pressing the "Select All" button, the candidate list might disappear. 

This problem has been corrected.   

4  OSA 

5  OSA 

6  Web Page 

The list of the Address Book from the Web Page of the main unit was not displayed in 
the order of the search string.  This problem has been corrected. 

7  Web Page 

When executing the connection test of LDAP under Quick Settings of Network Settings 
on Web Page, the error occurred even though it was properly connected.  This problem 
has been corrected.   

8  Main Unit 

With NAS function enabled when taking the PDF etc in to the shared folder of NAS, 
and then printing that file, the file with IP address of MFP was newly created in the 
shared folder.  This problem has been corrected.  

9  Copier 

When the Copy key was pressed after placing the original on the document feeder, the 
copy key command would be processed first before the processing to determine the 
paper size on the document feeder, and as the result of it, the original was scanned from 
the document glass, which might cause the "blank page" output.  This problem has been 
corrected.   

10  FAX 

Upon reception of the Fax, E7-91 error (Fax receiving image trouble) might occur after 
the occurrence of NG 169930 error (communication trouble between MFP controller and 
modem controller).  This problem has been corrected. 

11  FAX 

When sending the FAX with Timer function, there were some cases where the data 
sending did not start.  This problem has been corrected. 

12  Image Send 

If the window size of the recipient becomes full when sending the direct SMTP, the 
wrong 1-byte data might be sent out, which caused E7-93(8F) at the recipient side.  This 
problem has been corrected.  

13  Image Send 

After the occurrence of I-Fax reception error, the machine might hang up by the 
message "Please wait" upon the power OFF/ON.  This problem has been corrected.    

14  Printer 

There were some cases where the model information of the option desk could not 
correctly be taken when outputting the prints (with the option desk installed), and in this 
case, the image handling was carried out with the option configuration of the tray being 
recognized falsely.  This problem has been corrected. 

15   Network 

When the machine entered to the Power Saving mode with LAN being disconnected, the 
communication became impossible even though LAN was connected afterward.  This 
problem has been corrected. 

16  Simulation 

Factory default setting of Sim26-32 "Fusing cleaning operation spec settings" has been 
changed from "1: NO" to "0: YES".   

17  Others 

"Eup Lot4" that is one of the European environment standards has now been supported.