Sharp MX-2300N / MX-2700N / MX-2300G / MX-2700G / MX-2300FG / MX-2700FG (serv.man11) Service Manual ▷ View online
MX-RPX1 DISASSEMBLY AND ASSEMBLY 6 – 5
7)
Loosen the tension holder screw to loosen the belt tension,
and remove the parts.
and remove the parts.
8)
Remove the scan rear roller, and remove the parts.
(5) SPF paper entry detection 2 sensor/SPF scan front
sensor
1)
Remove the front cabinet and the rear cabinet.
2)
Remove the transport unit.
3)
Remove the document tray unit.
4)
Remove the drive unit.
5)
Remove the scan plate unit.
6)
Remove the sensor mounting plate.
3. Paper exit section
A. Paper exit section parts
(1) Discharge brush
1)
Remove the front cabinet and the rear cabinet.
2)
Remove the transport unit.
3)
Remove the discharge brush.
• Discharge brush attachment reference
Fit the discharge brush with the mark-up reference and
attach it.
attach it.
(2) Paper exit roller
1)
Remove the front cabinet and the rear cabinet.
2)
Remove the transport unit.
3)
Remove the document tray unit.
4)
Remove the drive unit.
5)
Remove the parts.
6)
Remove the parts and remove the paper exit roller.
1
2
1
2
2
1
1
2
MX-RPX1 DISASSEMBLY AND ASSEMBLY 6 – 6
4. Document reverse section
A. Reverse section parts
(1) SPF document exit gate solenoid
1)
Remove the front cabinet and the rear cabinet.
2)
Remove the transport unit.
3)
Remove the solenoid adjustment plate. Remove the SPF doc-
ument exit gate solenoid.
* When assembling, insert the pin of the SPF document exit
ument exit gate solenoid.
* When assembling, insert the pin of the SPF document exit
gate solenoid into the gate.
(2) SWB roller
1)
Remove the front cabinet and the rear cabinet.
2)
Remove the transport unit.
3)
Remove the document tray unit.
4)
Remove the drive unit.
5)
Remove the paper exit roller.
6)
Remove the parts, and remove the intermediate tray unit.
7)
Remove the intermediate tray PG. Remove the E-ring and the
bearing. Remove the SWB roller.
bearing. Remove the SWB roller.
(3) SWB pass section transport roller/SPF reverse
rear sensor
1)
Remove the front cabinet and the rear cabinet.
2)
Remove the transport unit.
3)
Remove the paper feed unit.
4)
Remove the document tray unit.
5)
Remove the drive unit.
6)
Remove the separation roller.
7)
Remove the separation transport PG.
8)
Remove the parts. Remove the separation shaft and the
spring.
spring.
9)
Remove the intermediate PG.
1
2
1
1
2
1
2
3
1
1
2
3
MX-RPX1 DISASSEMBLY AND ASSEMBLY 6 – 7
10) Remove the parts, and remove the SWB pass section trans-
port roller.
11) Remove the scan rear roller.
12) Remove the scan rear PG.
12) Remove the scan rear PG.
13) Remove the SPF reverse rear sensor.
5. Drive section
A. Drive unit
1)
Remove the front cabinet and the rear cabinet.
2)
Remove the transport unit.
3)
Remove the document tray unit.
4)
Remove the resin E-ring and the bearing. Remove the drive
unit and the parts.
unit and the parts.
(1) Belts
1)
Remove the front cabinet and the rear cabinet.
2)
Remove the transport unit.
3)
Remove the document tray unit.
4)
Remove the drive unit.
(2) SPF paper feed clutch
1)
Remove the rear cabinet.
2)
Remove the resin E-ring, and remove the SPF paper feed
clutch.
clutch.
1
1
2
1
2
3
3
MX-RPX1 DISASSEMBLY AND ASSEMBLY 6 – 8
(3) Resist roller clutch
1)
Remove the front cabinet and the rear cabinet.
2)
Remove the transport unit.
3)
Remove the E-ring, and remove the SPF resist roller clutch.
(4) SPF paper feed reverse motor
1)
Remove the front cabinet and the rear cabinet.
2)
Remove the transport unit.
3)
Remove the document tray unit.
4)
Remove the drive unit.
5)
Remove the SPF paper feed reverse motor.
(5) SPF transport motor
1)
Remove the front cabinet and the rear cabinet.
2)
Remove the transport unit.
3)
Remove the document tray unit.
4)
Remove the drive unit.
5)
Loosen the tension holder screw to loosen the belt tension.
Remove the SPF transport motor.
Remove the SPF transport motor.
6. Base tray section
A. Base tray section parts
(1) RSPF driver PWB
1)
Remove the rear cabinet.
2)
Remove the RSPF driver PWB.
(2) SPF reverse gate front sensor
1)
Remove the screw, and peel off the OC mat.
2)
Remove the sensor cover.
3)
Remove the SPF reverse gate front sensor.
1
2
2
Click on the first or last page to see other MX-2300N / MX-2700N / MX-2300G / MX-2700G / MX-2300FG / MX-2700FG (serv.man11) service manuals if exist.