Sharp DX-CS10 Service Manual ▷ View online
[5]Replacement and Adjustment
5-60
6. Fusing stripper pawl solenoid [B] (
x 2)
Fusing Pressure Release Sensor
1 Fusing stripper pawl solenoid assembly (
p. 5-59)
[5]Replacement and Adjustment
5-61
2. Fusing pressure release sensor [B] (
[A] x 1, hooks x 4)
LSU Fan Motor
1 Operation panel (
p. 5-6)
2. Rear cover (
p. 5-5)
3. Left cover (
p. 5-7)
4. LSU fan motor [A] (hooks x 2,
x 1)
Install the LSU fan motor with its decal facing the outside of the machine.
ID Chip Board
1 Operation panel (
p. 5-6)
[5]Replacement and Adjustment
5-62
2. Rear cover (
p. 5-5)
3. Left cover (
p. 5-7)
4. Controller box cover (printer model:
p.49) or FCU and Speaker bracket (DX-C200:
p. 5-49)
5. Disconnect the connector (CN305) on the EGB.
6. Interlock switch base (
p. 5-57)
7. Fusing fan base (
p. 5-58)
8. Drive unit (
p. 5-18)
9. Take the harnesses aside around the LSU fan base [A].
10. LSU fan base [A] (
x 2,
x 1)
11. ID Chip Board [B] (
x 3)
PSU
1 Left cover (
p. 5-7)
[5]Replacement and Adjustment
5-63
2. Disconnect 2 connectors on the AIO motors, and remove all harnesses from the harness
guide [A].
3. Harness guide [A] (
x 4,
x 2)
Click on the first or last page to see other DX-CS10 service manuals if exist.