Sharp DX-C200P Service Manual ▷ View online
4
ADF Feed Sensor 5-78
ADF Drive Board 5-79
Scanner (only for DX-C200) 5-81
Scanner Unit 5-81
Scanner Top Cover 5-83
Scanner Carriage Unit 5-84
Exposure Lamp 5-85
Lamp Stabilizer Board 5-87
Scanner Motor 5-87
ADF Drive Board 5-79
Scanner (only for DX-C200) 5-81
Scanner Unit 5-81
Scanner Top Cover 5-83
Scanner Carriage Unit 5-84
Exposure Lamp 5-85
Lamp Stabilizer Board 5-87
Scanner Motor 5-87
[6]System Maintenance Reference 6-1
Image Problems 6-1
Overview 6-1
Image Problem 6-1
Error Codes 6-2
Overview 6-2
Error Codes List 6-2
Service Call Conditions 6-6
Service Menu 6-17
Maintenance Mode Menu 6-18
Configuration, Maintenance and Test Page Information 6-32
Overview 6-32
Error Log 6-33
Counter and Coverage (only for DX-C200P) 6-34
Firmware Updating 6-35
Checking the Machine Firmware Version 6-35
Updating the Engine Firmware 6-36
Boot Loader Firmware 6-38
Overview 6-1
Image Problem 6-1
Error Codes 6-2
Overview 6-2
Error Codes List 6-2
Service Call Conditions 6-6
Service Menu 6-17
Maintenance Mode Menu 6-18
Configuration, Maintenance and Test Page Information 6-32
Overview 6-32
Error Log 6-33
Counter and Coverage (only for DX-C200P) 6-34
Firmware Updating 6-35
Checking the Machine Firmware Version 6-35
Updating the Engine Firmware 6-36
Boot Loader Firmware 6-38
[7]Environmental Conservation 7-1
Energy Saving 7-1
[8]SELF PRINTING INFORMATION 8-1
Overview 8-1
Error Log 8-5
Counter and Coverage (only for DX-C200P) 8-5
Checking of the torer consumption ID-chip information 8-6
Error Log 8-5
Counter and Coverage (only for DX-C200P) 8-5
Checking of the torer consumption ID-chip information 8-6
[9]OPERATIONAL DESCRIPTION 9-1
Machine Overvier 9-1
5
Paper path 9-2
Drive Layout 9-3
Electrical component Layout 9-4
Board Structure 9-7
Printing Process 9-9
Process Control 9-11
Overview 9-11
Process control Self-check 9-12
Laser Exposure 9-15
Overview 9-15
Optical Path 9-16
LD Safety Switch 9-16
LUSIC (Laser Unit Skew and Interval correction 9-17
Paper Feed 9-18
Overview 9-18
Drive and Paper End Detection 9-19
Tray Lift 9-20
By-pass Feed 9-21
Duplex 9-21
AIO (All In One)Cartridge 9-23
Drive 9-24
OPC Charge and Crleaning 9-25
Waste Toner Collection from the OPC 9-26
Toner Mixing and Transport 9-26
Development Mechanism 9-27
Toner Near End and End Detection 9-27
Image Transfer 9-29
Overview 9-29
Drive and Transfer Belt Roller Bias 9-30
Transfer Belt Contact 9-30
ITB (Image Transfer Belt) Cleaning Unit 9-31
Transfer Roller Overview 9-32
Drive Layout 9-3
Electrical component Layout 9-4
Board Structure 9-7
Printing Process 9-9
Process Control 9-11
Overview 9-11
Process control Self-check 9-12
Laser Exposure 9-15
Overview 9-15
Optical Path 9-16
LD Safety Switch 9-16
LUSIC (Laser Unit Skew and Interval correction 9-17
Paper Feed 9-18
Overview 9-18
Drive and Paper End Detection 9-19
Tray Lift 9-20
By-pass Feed 9-21
Duplex 9-21
AIO (All In One)Cartridge 9-23
Drive 9-24
OPC Charge and Crleaning 9-25
Waste Toner Collection from the OPC 9-26
Toner Mixing and Transport 9-26
Development Mechanism 9-27
Toner Near End and End Detection 9-27
Image Transfer 9-29
Overview 9-29
Drive and Transfer Belt Roller Bias 9-30
Transfer Belt Contact 9-30
ITB (Image Transfer Belt) Cleaning Unit 9-31
Transfer Roller Overview 9-32
Paper Transfer and Discharge 9-32
Waste Toner Collection 9-33
Fusing and Exit 9-35
Overview 9-35
Waste Toner Collection 9-33
Fusing and Exit 9-35
Overview 9-35
6
Drive 9-35
Pressure Release Mechanism 9-37
Envelope Lever (Pressure Release Lever) 9-38
Temperature control 9-39
Pressure Release Mechanism 9-37
Envelope Lever (Pressure Release Lever) 9-38
Temperature control 9-39
Controller 9-42
Overview 9-42
ADF(only for DX-C200) 9-46
Overview 9-46
Paper Path 9-46
Timing Chart 9-47
Scanner (only for MF models) 9-49
Timing Chart 9-47
Scanner (only for MF models) 9-49
[10]Specifications 10-1
General Specifications 10-1
DX-C200P 10-1
DX-C200 10-3
Option 10-10
Controller Specifications 10-11
Controller Specifications 10-11
Supported Paper Sizes 10-16
[11]ACTUAL WRING/SIGNAL LIST
Appendix
1 DX-CS10
Appendix
1 DX-CS10
2 Installing the Printer(DX-C200P)and Options
Installing the Printer
Installing Option
Installing Option
3 Getting Started(Installing the DX-C200)
Installing the machine
Installing Option
Installing Option
8
Read This First
Safety Notices
Important Safety Notices
Prevention of Physical Injury
1. Before disassembling or assembling parts of the machine and peripherals, make sure
that the machine power cord is unplugged.
2. The wall outlet should be near the machine and easily accessible.
3. If any adjustment or operation check has to be made with exterior covers off or open
3. If any adjustment or operation check has to be made with exterior covers off or open
while the main switch is turned on, keep hands away from electrified or mechanically
driven components.
driven components.
4. The machine drives some of its components when it completes the warm-up period. Be
careful to keep hands away from the mechanical and electrical components as the
machine starts operation.
machine starts operation.
5. The inside and the metal parts of the fusing unit become extremely hot while the
machine is operating. Be careful to avoid touching those components with your bare
hands.
hands.
Health Safety Conditions
Toner is non-toxic, but if you get either of them in your eyes by accident, it may cause
temporary eye discomfort. Try to remove with eye drops or flush with water as first aid. If
unsuccessful, get medical attention.
temporary eye discomfort. Try to remove with eye drops or flush with water as first aid. If
unsuccessful, get medical attention.
Observance of Electrical Safety Standards
The machine and its peripherals must be serviced by a customer service representative who
has completed the training course on those models.
has completed the training course on those models.
Safety and Ecological Notes for Disposal
1. Do not incinerate toner bottles or used toner. Toner dust may ignite suddenly when
exposed to an open flame.
2. Dispose of used toner, the maintenance unit which includes developer or the organic
Click on the first or last page to see other DX-C200P service manuals if exist.