DOWNLOAD Sharp DM-2000 Service Manual ↓ Size: 313.24 KB | Pages: 25 in PDF or view online for FREE

Model
DM-2000
Pages
25
Size
313.24 KB
Type
PDF
Document
Handy Guide
Brand
Device
Copying Equipment / DM2000-Handy Guide
File
dm-2000.pdf
Date

Sharp DM-2000 Handy Guide ▷ View online

Machine Options
Version 2.1
Issue 05/2000
5
SHARP ELECTRONICS (UK)  LTD
COPIER TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
STANDARD EQUIPMENT
AR-TR2
Job Separator.
Used to differentiate between copied/printed/faxed outputs.
AR-PA1
LCD Panel Kit  (For use with AR-PB8 & DM-FX1)
AR-PB8
Printer Interface Kit (PCL6)
Supports Windows 3.1/95/98 and Windows NT 4.0.
AR-PS1
Postscript printer driver (PS2).
Supports Windows 3.1/95/98 and Windows NT 4.0.
OPTIONAL FEATURES
 
AR-SP2
30 Sheet single pass document feeder.
AR-NC3D
10/100 base T Network Interface Card. DM2000 only
( Standard on DM2000N)
 
AR-DE5
250-sheet additional paper tray.
 
AR-DE6
2 x 250 sheet additional paper tray.
AR-EB3
Electronic Sorting Kit
Allows scan once print many, sorting/grouping, A4R rotation
and N-up copying.
DM-FX1
Facsimile module (Requires AR-SP2)
AR-MM5
2MB Fax Memory Upgrade
AR-MM6
4MB Fax Memory Upgrade
AR-MM7
8MB Fax Memory Upgrade
AR-DK12
Cabinet for 2-tray version of DM2000
AR-DK34
Cabinet for 3 or 4 tray version of DM2000
Machine Installation
Version 2.1
Issue 05/2000
6
SHARP ELECTRONICS (UK)  LTD
COPIER TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
MACHINE
OPTIONS
INSTALLATION ORDER
DM-FX1 Fax Board
AR-NC3D Network Card
AR-SP2 Document Feeder
AR-EB3 Electronic Sort Board
DEVELOPER SETUP
The toner/developer cartridge is self-
setting.
No set-up procedure is required.
LASER PRINT
HORIZONTAL IMAGE CHECK
Sim 64 – 01 Laser print check
LASER PRINT
 &
ORIGINAL OFF CENTER
Sim 50 – 10 Adjust All Cassettes
(Laser Print)
Sim 50 – 13 OC off centre adjust
Sim 50 – 16 SPF off centre adjust
Sim 50 – 18 Duplex print adjust
Sim 50 – 19 Duplex rear edge adjust
Cont’d
Machine Installation
Version 2.1
Issue 05/2000
7
SHARP ELECTRONICS (UK)  LTD
COPIER TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
COPY IMAGE POSITION
& VOID
Sim 50 – 01  Copy lead and trail edge 
adjust ( all cassettes )
COPY QUALITY
Sim 46 – 01 Adjust Copy Density
( All Modes)
CASSETTE SIZES
Set cassette sizes as per Service
Manual page 5-3
OTHER
Sim 21 – 01 Maintenance Cycle 
Setting
Sim 26 – 06 Destination Setting
Sim 26 – 22 Destination Language 
Setting
CUSTOM SETTINGS
(Key Operator)
Auto Power Off Setting
Pre-Heat Timer Setting
Auto clear time
Rotation copy
Routine Maintenance
Version 2.1
Issue 05/2000
8
SHARP ELECTRONICS (UK)  LTD
COPIER TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Although traditional routine maintenance is not required with these models,( replace upper
fuser roller @150k), the following items may require attention when making a routine visit
or at the one maintenance call (150k)
MAINTENANCE COMPLETED
Sim 20 – 01 Maintenance Counter Reset
Sim 21 – 01 Maintenance Setting Check
DRUM REPLACEMENT
Sim 24 – 07 Drum Membrane Counter Reset
(normally resets when new drum cartridge is installed)
COPY QUALITY
Sim 46 – 01 Copier Mode Adjust
JAM & TROUBLE COUNTER
Sim 24 – 01 Jam memory, Jam counter clear
Sim 24 – 02  Trouble memory clear
FEED ROLLER REPLACEMENT
Sim 24 – 06 Paper Feed Counter Reset
Page of 25
Display

Click on the first or last page to see other DM-2000 service manuals if exist.