DOWNLOAD Sharp DM-2000 (serv.man8) Service Manual ↓ Size: 1.69 MB | Pages: 18 in PDF or view online for FREE

Model
DM-2000 (serv.man8)
Pages
18
Size
1.69 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / DM2000 Service Manual-Disassembly Assembly Electrical Section
File
dm-2000-sm8.pdf
Date

Sharp DM-2000 (serv.man8) Service Manual ▷ View online

A. Fusing unit
B. Thermostat
C. Thermistor
Installation: Check that the thermistor is in contact with the upper heat
roller.
D. Heater lamp
Assembly: Insert the spring (A) into the hole (B) in the fusing frame.
Assembly: Put the paper guide earth spring (A) under the paper guide
(B) before fusing.
Disassembly: There are three pawls on the fusing cover. Remove the
screws and slide the fusing cover to the right to remove.
The heater lamp is fixed on the fusing cover with a
screw. Slide the fusing cover to the front and remove
the screw, then remove the heater lamp.
( 2 )
( 3 )
( 1 )
( 1 )
( 2 )
( 3 )
( 1 )
( 1 )
( 2 )
( 1 )
(A)
(B)
(2)
(1) (2)
(3)
(4)
(3)
(B)
(A)
DM-2000
11  –  3
Assembly: Put the fusing harness (A) on the heater lamp (B) as shown
in the figure and fix them together.
Place the fusing harness inside the rib (C).
E. Upper heat roller
F. Upper heat roller separation pawl
G. Lower heat roller
Assembly: When installing the paper guide (3) before fusing, tighten
the paper guide fixing plate so that the paper guide fixing
plate (2) is in contact with the frame bottom section (A)
under fusing.
( 6 )
( 5 )
( 8 )
( 9 )
( 7 )
( 8 )
( 1 0 )
( A )
( B )
( C )
( 2 )
( 1 )
( 4 )
( 3 )
( 3 )
(2)
(1)
(2)
(2)
(1)
(1)
(3)
(3)
(1)
(4)
(1)
(2)
(3)
(2)
(A)
DM-2000
11  –  4
H. Lower heat roller separation pawl
∗ The simplex model has only two lower heat roller pawls.
4. Paper exit section
No.
Content
A
Front cabinet unit/Right cabinet unit
B
Paper exit unit
C
Transport roller
D
Paper exit roller
A. Front cabinet unit, right cabinet
B. Paper exit unit removal
C. Transport roller
( 3 )
( 2 )
( 1 )
( 1 )
( 6 )
( 6 )
( 5 )
( 4 )
( 5 )
( 5 )
( 1 )
( 2 )
( 5 )
( B )
( A )
( 3 )
( 4 )
( 4 )
( 7 )
( 6 )
( 8 )
( 6 )
( 8 )
( 1 0 )
( 9 )
( 9 )
( 1 )
( 2 )
( 1 )
DM-2000
11  –  5
D. Paper exit roller
Assembly: Insert the spring pin so that the waveform (A) of the spring
pin faces in the longitudinal direction of the paper exit drive
gear long hole (B).
Be sure to insert two ribs (C) into the groove (D).
5. MCU/Mother board/Printer control PWB
No.
Content
A
Mother board
B
MCU
C
Printer control PWB
A. Mother board
( 3 )
( 4 )
( 6 )
( 7 )
( 5 )
( 5 )
( 1 )
( 3 )
( 2 )
( 2 )
( 4 )
( 4 )
( 5 )
( B )
( A )
( D )
( C )
( C )
( 8 )
( 6 )
( 6 )
( 7 )
( 7 )
(1)
DM-2000
11  –  6
Page of 18
Display

Sharp DM-2000 (serv.man8) Service Manual ▷ Download

  • DOWNLOAD Sharp DM-2000 (serv.man8) Service Manual ↓ Size: 1.69 MB | Pages: 18 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp DM-2000 (serv.man8) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp DM-2000 (serv.man8) Copying Equipment. Information contained in Sharp DM-2000 (serv.man8) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.