Sharp DM-2000 (serv.man6) Service Manual ▷ View online
Main
code
code
Sub
code
Contents
Details of operation
Initial
value
value
Set range
22
1
Maintenance counter
display
display
Used to display the current maintenance counter value.
∗1
2
Maintenance preset value
display
display
Used to display the current maintenance preset value (set with SIM 21-
1).
1).
∗1
3
JAM memory display
Used to display a JAM generated during copying on the JAM position
display on the operation panel. Max. 30 recent jams are stored.
JAM No. 1 is displayed even when there is no JAM.
display on the operation panel. Max. 30 recent jams are stored.
JAM No. 1 is displayed even when there is no JAM.
4
Total JAM counter display
Used to display the current total JAM counter value.
∗1
5
Total counter display
Used to display the current total counter value.
∗1
6
Developing counter display
Used to display the current developing unit counter value.
∗1
7
Developing preset
counter value display
(Japan only)
<Not used>
counter value display
(Japan only)
<Not used>
Used to display the current mini maintenance preset value (set with SIM
21-2).
21-2).
∗1 (Japan only)
8
SPF counter display
<SPF is required>
<SPF is required>
Used to display the current SPF counter value.
∗1
9
Paper feed counter
display
display
Used to display the current paper feed counter value for each paper
feed port.
feed port.
∗1
12
Drum counter display
Used to display the current drum counter value.
∗1
14
Copier ROM version
display
display
Used to display the version number of the main ROM.
15
Trouble memory display
Used to display the actually occurred trouble codes on the display on
the operation panel. When the start key is pressed during the main code
display, the sub code is displayed. Max. 20 recent trouble codes are
stored.
the operation panel. When the start key is pressed during the main code
display, the sub code is displayed. Max. 20 recent trouble codes are
stored.
16
Duplex print counter
display
<Not used>
display
<Not used>
Used to display the current duplex print counter value.
∗1
17
Copy counter display
Used to display the current copy counter value.
∗1
18
Printer counter display
Used to display the current printer counter value.
∗1
19
Electronic sort counter
display
<E-sort is required>
display
<E-sort is required>
Used to display the current electronic sort counter value.
∗1
20
FAX print counter display
<FAX kit is required>
<FAX kit is required>
Used to display the current FAX print counter value.
∗1
21
Scanner counter display
Used to display the current scanner counter value.
∗1: Each counter display method
To display 123456: 123 (0.75 sec)
→ Blank (0.35 sec) → 456 (0.75 sec) → Blank (1.0 sec) → repetition
∗2: Display after clearing each counter
000 (0.75 sec)
→ Blank (0.35 sec) → 000 (0.75 sec) → Blank (1.0 sec) → Repetition
Key operation
Display
JAM history select:
Magnification ratio display key
Magnification ratio display key
The history number (1
∼ 30) is
displayed on the display.
The JAM position LED
corresponding to the history
number is lighted.
The JAM position LED
corresponding to the history
number is lighted.
Key operation
Paper feed port selection: Tray select key
Display
(Example) When the ROM version is 4.01:
004
004
→ Blank → 001 → Blank → Repetition
Key operation
Display
Sub code display: Start key
Histories 1
∼ 10: The upper digit of
display
“A”
∼ “J” lights up.
Histories 11
∼ 20: The upper digit of
display
“A”
∼ “J” blinks.
Trouble code history
select: Magnification ratio
display key
select: Magnification ratio
display key
● Display without trouble code
Main code: “– –”
Sub code: “00”
Sub code: “00”
DM-2000
7 – 5
Main
code
code
Sub
code
Contents
Details of operation
Initial
value
value
Set range
24
1
JAM memory, JAM
counter clear
counter clear
Used to clear the JAM memory and the JAM counter.
∗2
2
Trouble memory clear
Used to clear the trouble memory.
∗2
4
SPF counter clear
<SPF is required>
<SPF is required>
Used to clear the SPF counter.
∗2
5
Duplex counter clear
<Not used>
<Not used>
Used to clear the duplex counter.
∗2
6
Paper feed counter clear
Used to clear the paper feed counter.
∗2
7
Drum counter clear
Used to clear the drum counter.
∗2
8
Copy counter clear
Used to clear the copy counter.
∗2
9
Printer counter clear
Used to clear the printer counter.
∗2
10
Electronic sort counter
clear
<E-sort is required>
clear
<E-sort is required>
Used to clear the electronic sort counter.
∗2
11
FAX print counter clear
<FAX kit is required>
<FAX kit is required>
Used to clear the FAX print counter.
∗2
13
Scanner counter clear
Used to clear the scanner counter.
∗2
25
1
Main motor operation
check
check
Execute the simulation with the developer cartridge removed, and the
main motor will rotate for 30 sec. At that time, the cooling motor rotates
at a low speed.
main motor will rotate for 30 sec. At that time, the cooling motor rotates
at a low speed.
10
Polygon motor operation
check
check
Used to drive the polygon motor for 30 sec.
26
1
Option switch display
Used to display the installed option on the operation panel. (The LED
corresponding to the installed option is lighted.)
corresponding to the installed option is lighted.)
3
Auditor setting
Used to display the current auditor setting with the numbers at right.
After entering the set value, press the start key, and the set value is
stored.
After entering the set value, press the start key, and the set value is
stored.
0
0
∼ 2
∗2: Display after clearing each counter
000 (0.75 sec)
→ Blank (0.35 sec) → 000 (0.75 sec) → Blank (1.0 sec) → Repetition
Key operation
Display
Display select:
Magnification
ratio display key
Magnification
ratio display key
<Lighting with an option installed>
When “A” is displayed:
Shifter: Paper empty LED
Job separator: JAM LED
SPF: SPF select LED
RSPF: SPF JAM LED
Duplex mode: Main cassette select LED
Simplex mode: Multi bypass tray select LED
When “b” is displayed:
Cassette (2nd step): No. 2 cassette select LED
Cassette (3rd step): No. 3 cassette select LED
Cassette (4th step): No. 4 cassette select LED
Memory installed: Paper empty LED
FAX: JAM LED
Printer: Main body JAM LED
ERDH: Main cassette select LED
16CPM: SPF JAM LED
20CPM: SPF select LED
Document sensor: Auto paper select LED
Key operation/Display
0: Built-in auditor
1: Coin vendor
2: Others
DM-2000
7 – 6
Main
code
code
Sub
code
Contents
Details of operation
Initial
value
value
Set range
26
5
Counter mode setting
Used to set the print counter mode in A3 or 11"
× 17".
Used to display the currently set counter value with the numbers at right.
After entering the set value, press the start key, and the set value is
stored.
After entering the set value, press the start key, and the set value is
stored.
0
0
∼ 3
6
Destination setting
Used to display the current destination setting with the numbers at right.
After entering the set value, press the start key, and the set value is
stored.
After entering the set value, press the start key, and the set value is
stored.
0
0
∼ 11
10
Model name setting
Used to set the model name of the machine used with the following
numbers. After entering the set value, press the start key and the set
value is stored.
numbers. After entering the set value, press the start key and the set
value is stored.
0
0
∼ 19
22
Language setting
Used to display the current setting of the language information with the
number at right. After entering the set value, press the start key, and the
set value is stored.
number at right. After entering the set value, press the start key, and the
set value is stored.
0
0
∼ 7
30
CE mark conformity
control setting
control setting
Used to display the current setting of CE mark conformity control with
the number at right. After entering the set value, press the start key, and
the set value is stored.
the number at right. After entering the set value, press the start key, and
the set value is stored.
0
0
∼ 1
Key operation/Display
0: Total/Developer = 2 counts
Maintenance = 2 counts
1: Total/Developer = 1 count
Maintenance = 2 counts
2: Total/Developer = 2 counts
Maintenance = 1 count
3: Total/Developer = 1 count
Maintenance = 1 count
Key operation/Display
0: Japan
6: France (AB series)
1: USA (Inch series)
7: EX inch series
2: Canada (Inch series)
8: EX AB series
3: Germany (AB series)
9: EX inch series (FC conformity)
4: UK (AB series)
10: EX AB series (FC conformity)
5: Australia (AB series)
11: Taiwan, China (AB series)
Key operation/Display
0: AL-1600
11: AR-N200
1: AL-1610
12: AR-N205
2: AL-1620
13: AL-1621
3: AL-1640/AL-1641
14: AL-1650
4: AR-160/AR-S160
15: AL-1670
5: AR-161/AR-S161
16: AR-F200
6: AR-200S
17: DM-2000
7: AR-200/AR-S200
18: DM-2005
8: AR-205/AR-S205
19: DM-2010
9: AR-F160
10: AR-F205
Key operation/Display
0: Japanese
4: Italian
1: English
5: Dutch
2: French
6: Swedish
3: German
7: Spanish
Key operation/Display
0: CE mark control OFF
1: CE mark control ON
DM-2000
7 – 7
Main
code
code
Sub
code
Contents
Details of operation
Initial
value
value
Set range
26
32
Fan rotation duty change
state setup
state setup
The currently set fan motor rotation duty is displayed with the following
numbers. After entering the set value, press the start key to store the
set value.
numbers. After entering the set value, press the start key to store the
set value.
0
0.1
38
Cancel of stop at drum
life over
life over
The currently set value is displayed. After entering the set value, press
the start key to store the set value.
the start key to store the set value.
0
0
∼ 1
42
Transfer timing adjustment
After completion of warm up, shading is performed and the currently set
transfer timing adjustment value is displayed.
transfer timing adjustment value is displayed.
5
1, 3, 5, 7, 9
50
Black-white reversion
function setup
function setup
The current setup of black-white reversion is displayed with the following
numbers. After entering the set value, press the start key to store the
set value.
numbers. After entering the set value, press the start key to store the
set value.
0
0.1
51
Sort/Group copy
temporary stop function
setup
temporary stop function
setup
<E-sort is required>
Used to set whether temporary stop for every 250-sheet print (150-sheet
print when the job separator is installed) is made or not during copying
with the sort/group function. The current setup is displayed with the
following numbers. After entering the set value, press the start key to
store the set value.
print when the job separator is installed) is made or not during copying
with the sort/group function. The current setup is displayed with the
following numbers. After entering the set value, press the start key to
store the set value.
1
0.1
30
1
Machine sensor operation
check
check
Used to check the sensors in the machine transport system with LED on
the operation panel.
the operation panel.
41
2
OC document sensor
adjustment
adjustment
Used to read the document sensor input value with paper and perform
the sensor detection level adjustment. For the adjustment procedure of
the document sensor input value, refer to the previous descriptions.
the sensor detection level adjustment. For the adjustment procedure of
the document sensor input value, refer to the previous descriptions.
Key operation/Display
0: Operating 50%, standby 30%
1: Operating 80%, standby 50%
Key operation/Display
0: The machine stops at drum life over.
1: The machine does not stop at drum life over.
Key operation
Transfer timing adjustment
value: Copy quantity keys
value: Copy quantity keys
“1”: 240 ms
“7”: 300 ms
“3”: 260 ms
“9”: 320 ms
“5”: 280 ms
Key operation/Display
0: Black-white reversion function enabled
1: Black-white reversion function disabled
Key operation/Display
0: Does not stop.
1: Stops.
Display
<Lighting at sensor ON>
Paper entry sensor: Machine position JAM LED
Duplex sensor: SPF JAM LED
Paper exit sensor: JAM LED
No. 2 cassette transport sensor: No. 2 cassette position LED
No. 3 cassette transport sensor: No. 3 cassette position LED
No. 4 cassette transport sensor: No. 4 cassette position LED
Drum initial SW: DRUM LED
DM-2000
7 – 8
Click on the first or last page to see other DM-2000 (serv.man6) service manuals if exist.