DOWNLOAD Sharp DM-2000 (serv.man2) Service Manual ↓ Size: 79.97 KB | Pages: 8 in PDF or view online for FREE

Model
DM-2000 (serv.man2)
Pages
8
Size
79.97 KB
Type
PDF
Document
Service Manual / Specification
Brand
Device
Copying Equipment / DM2000 Specifications
File
dm-2000-sm2.pdf
Date

Sharp DM-2000 (serv.man2) Service Manual / Specification ▷ View online

P. Other specifications
Photoconductor type
OPC (Organic Photo Conductor)
Photoconductor drum dia.
30 mm
Copy lamp
Xenon lamp
Developing system
Dry 2-component magnetic brush
development
Charging system
Saw teeth charging
Transfer system
(+) DC corotoron
Separation system
(–) DC corotoron
Fusing system
Heat roller
Cleaning system
Contact blade
Q. Package form
Body
Body/Accessories (NIC board is separately
packed.)
R. External view
External dimensions
(W 
× D × H)
590 
× 531 × 552 mm (including Platen)
Occupying area
(W 
× D)
590 
× 531 mm
(When the multi bypass tray is installed.)
Weight
About 36.5 kg
S. Power source
Voltage
AC120V 
± 15%
Frequency
50/60Hz common
T. Power consumption
Max. power consumption
About 1.5 KWh
∗ EnergyStar standard (The second level conformity)
Pre-heat
About 60 Wh
Auto power shut off
About 4.8 Wh
U. Digital performance
Resolution
Reading
400 dpi
Writing
600 dpi
Gradation
Reading
256 gradations
Writing
Binary
2. Specifications of printer section
A. Basic specifications
Item
Contents
Print speed
20 PPM
Resolution
600 dpi, 300 dpi (1,200 dpi equivalent by
smoothing)
Toner save
Available
Paper feed tray
Multi bypass tray
Tray 1, Tray 2, Tray 3, Tray 4 (Depends on
the machine and the option installation.)
Paper size
Multi bypass tray
A3, B4, A4R,
B5R, A5, 11" 
×
17", 8.5" 
× 14",
8.5" 
× 11"R, 8.5"
× 5.5"R, 8.5" ×
13", 8.3" 
× 13",
7.25" 
× 10.5"R,
DL, C5, COM10
Tray
∼  4
11" 
× 17", 8.5" × 14", 8.5" × 11",
8.5" 
× 11"R, 8.5" × 5.5", 8.5" ×
13"
Paper exit
Face down system
Shifter
Available
Page
description
language
(standard)
PCL6 emulation
PCL5e emulation
PostScript Level 2 emulation
Dot emulation
None
Page protection
function
Available
Interface
Standard
IEEE1284
port
Compatibility mode
Nibble mode
Expansion
slot
Expansion slot for
Print Server Card
×  1
Option
10/100
Base TX
TCP/IP, IPX/SPX
Interface cable
Use IEEE1284 conforming parallel cable.
(shielded and grounded)
Max. length
Within 3.0 m
Interface select
Auto
Emulation select
Auto
Plug and play
Conforming (only with Windows 95/98)
Printer driver
PCL
6
PCL
5e
PS2
Microsoft Windows 3.1
Microsoft Windows 95
Microsoft Windows 98
Microsoft Windows
NT4.0
Macintosh OS version
7.5 or later
Network control
software
Printer Administration Utility
Built-in fonts
Outline 45 fonts (PCL6 compatible)
Outline 35 fonts (PS2 compatible)
DM-2000
2  –  3
Item
Contents
Screen font
Outline 31 fonts (PCL6 compatible) for
Windows
Outline 35 fonts (PS2 compatible) for
Windows
Memory
Standard
8 MB
Max.
136 MB
Expansion slot
DIMM slot 
×  2
Expansion memory
(For details, refer to
the descriptions below.)
64 MB, 32 MB,
16 MB
(Commercially
available 168 pin
EDO DIMM 60ns
or faster used)
Conforming PC
IBM PC-AT compatible
Apple Macintosh Computer
B. Printer driver specifications
(1) System
OS
PCL6
PCL5e
PS2
IBM
PC/AT
Microsoft Windows 3.1
Microsoft Windows 95
Microsoft Windows 98
Microsoft Windows NT4.0
Macintosh
OS 7.5 or lator
(2) Kinds of printer drivers
Printer driver name
Name on PC screen
PCL5e for Windows 3.1/95/98
SHARP DM-2000
Series PCL5e
PCL5e for Windows NT4.0
PCL6 for Windows 95/98
SHARP DM-2000
Series PCL6
PCL6 for Windows NT4.0
PostScript Level2 for Windows
3.1/95/98
SHARP DM-2000
Series PS2
PostScript Level2 for Windows NT4.0
(3) Set content
Item
PCL6
PCL5e
Copies
1 to 999
Orientation
Portrait, Landscape
Document Style
1-Sided, 2-Sided (Book), 2-Sided
(Tablet)
Paper Source
Auto, Tray 1, Tray 2, Tray 3, Tray
4, Bypass Tray
Paper Size
A3 (297 
× 420 mm), B4 (257 ×
364 mm), A4 (210 
× 297 mm), A5
(148 
× 210 mm), B5 (182 × 257
mm), Ledger (11" 
× 17"), Letter
(8.5" 
× 11"), Legal (8.5" × 14"),
Executive (7.25" 
× 10.5"), Folio
(8.3" 
× 13"), Invoice (5.5" × 8.5"),
Foolscap (8.5" 
× 13"), DL, C5,
COM10, Custom Paper
N-Up Printing
1-Up, 2-Up, 4-Up
Border
On, Off
Fit to Page
On, Off
Page Protection
On, Off
Toner Save Mode
On, Off
Item
PCL6
PCL5e
Smoothing
On, Off
Resolution Settings
600 dpi, 300 dpi
Graphics Mode
HP-GL/2 (Vector), Raster
Half Tone
Photo Images, Line Art, Scanned
Images
Font Source
Resident Fonts, Download Fonts
True Type Mode
Download as True Type, Download
as bitmap font, Print as graphics
Input Tray
Two Trays, Three Trays, Four
Trays
Duplex Capability
Yes, No
Installed RAM
8 MB, 24 MB, 40 MB, 56 MB, 72
MB, 88 MB, 104 MB, 136 MB
Set
content of
custom
paper
Unit
0.01", 0.1 mm
Width
1000 to 2969
(In the case of 0.1 mm)
394 to 1169 (In the case of 0.01")
Length
1480 to 4318
(In the case of 0.1 mm)
583 to 1700 (In the case of 0.01")
Set
content of
water mark
Position
Depends on the paper size.
MAX Short –5.84" 
∼ 5.84"
   
Long 
–8.5" 
∼ 8.5"
Size
∼ 900
Angle
±90˚
Text
TOP SECRET
CONFIDENTIAL
DRAFT
ORIGINAL
COPY
Edit Fonts
Refer to the following Font List.
Edit Density
∼ 255
Transparent
Text
Yes, No
On First
Page Only
Yes, No
As Outline
Only
Yes, No (Only when Transparent
Text is OFF.)
(4) LCD display
a. LCD message
Status
LCD display
Content
Online
Online
AUTO
Auto select to
emulation
PCL
PCL
PS2
PS2
HEX
HEX
Error
Data Loss
Error
Press ENTER
Memory
Full
Press ENTER
Out of
Paper
Tray 1 <Paper Size>
When the paper
feed tray is
selected to other
than AUTO.
Tray 2 <Paper Size>
Tray 3 <Paper Size>
Tray 4 <Paper Size>
Bypass
<Paper Size>
Tray <Paper Size>
When the paper
feed tray is
selected to AUTO.
DM-2000
2  –  4
Status
LCD display
Content
Error
Check
Panel
Toner empty
Drum replacement
Cover open
Service call error
Clear
Paper Path
Paper jam
Paper exit tray full
User
setting
Main Menu
Copies
Printing of the set
quantity is made.
Resolution
Printing at the set
resolution is made.
Smoothing
Smoothing
function setting.
Toner Save
Toner save mode
setting
Page Protection
Setting of page
protection function
2-Sided Printing
Setting of duplex
function and
binding direction
Paper Source
Tray select
Paper Size
Paper size select
Orientation
Setting of print
direction
Emulation
Emulation setting
Network
Menu
Set IP Address
IP address
setting is made.
Set Subnet Mask
Subnet Mask
setting is made.
Set Default Gateway
Default Gateway
setting is made.
Enable TCP/IP
Enable/Disable
TCP/IP
Enable Netware
Enable/Disable
Netware
Enable EtherTalk
Enable/Disable
EtherTalk
Reset to Defaults
Reset Print
Server Card to
default
PS2 Menu
Print PS2 Error
Setting of printing
in case of PS
Error
Interface
Menu
I/O Time Out
If data reception
is not completed
within the set
time, it is judged
as a time out
error.
Test
Printing
Menu
Configuration Page
Configuration
page is printed.
PCL Font List
PCL6 Font page
is printed.
PS2 Font List
PS2 Font page is
printed.
b. LED display
ON LINE light
Extinguished
Indicates that the printer is off-
line and data cannot be
transferred or printed. Make
settings from the operation
panel in this mode. Note,
however, that you cannot make
settings if the “Data Remaining”
message is displayed.
Lit
Indicates that the printer is on-
line and data can be transferred
and printed.
DATA light
Extinguished
Indicates that there is no data
being received or processed.
Lit
Indicates that the printer is
receiving or processing print
data.
Blinking
Indicates that there is print data
remaining in memory that has
not yet been printed.
c. Operation keys
LINE key
Changes between the on-line and off-line
modes.
When the printer is on-line, it can receive
data from the computer with which it is
connected.
When the printer is off-line, you can use
operation panel keys to make print settings.
Note, however, that you cannot make settings
if the “Data Remaining” message is displayed.
MENU key
Used to show setting menus on the display in
sequence.
ITEM key
Used to show the setting items of the
selected menu in sequence.
Left arrow key
Right arrow key
Used to change the value of any item.
ENTER key
Used to enter a new value.
∗ Invalid when the printer is on-line.
(5) Network board
10/100 Base TX
TCP/IP, IPX/SPX, Ether Talk
10 Base T/2
TCP/IP, IPX/SPX, Ether Talk
(6) PC environment
a. In the case of IBM PC/AT or compatible computers
Computer 
Type
IBM PC/AT or compatible computer equipped with a
bi-directional parallel interface and CD-ROM drive
Operating 
System
Windows 95, Windows 98, Windows NT4.0
Windows 3.1
CPU
Windows 95: 486SX or better
Windows 98: 486DX/66MHz or better (Pentium or
better is recommended.)
Windows NT4.0: 486/25MHz or better
RAM
Windows 95: 8 MB or more (12 MB or more is
recommended.)
Windows 98: 16 MB or more (32 MB or more is
recommended.)
Windows NT4.0: 16 MB or more
DM-2000
2  –  5
b. In the case of Macintosh
Computer
Type
Macintosh computer
Operating
System
Macintosh System 7.5 to 8.5
CPU
MC68040 or Power PC micro processor
RAM
16MB or more for Power PC micro processor
machine
12MB or more for 68040 machine
(7) Expansion memory
Memory expansion realizes the following effects. 
● Increased processing speed of outline fonts or complex graphic data.
● Shorter release time from a printing job of the computer.
● Allows high resolution printing. 
● Complex data can be printed without data loss error or memory full
error. 
Type
DIMM (60ns/EDO/168pin) (Use commercially
available one.)
Capacity
64 MB, 32 MB, 16 MB
Recommendable 
product
Vendor
Capacity
Model name
Viking
Components
16 MB
32 MB
64 MB
VE2641U2EN3-60
VE4641U4EN3-60
VE8641U4EN3-60
Kingston
16 MB
32 MB
64 MB
KTA4400/16
KTM4X64VN42-60EG
KTM8X64VN84-60EG
Simple
Technology
16 MB
64 MB
STI642004UD1-60VG
STI648104UD1-60VG
Transcend
16 MB
32 MB
32 MB
64 MB
TS2MLE64V6PN
TS4MLE64V6TN
TS4MLE64V6UN
TS8MLE64V6VN
(8) Paper handling specifications
a. Paper feed direction
<1> Paper size and image transport direction
Paper Size
Side set to the paper feed port
A3
Short side
B4
Short side
A4
Long side
A4R
Short side
B5
Long side
B5R
Short side
A5
Long side
A5R
Short side
Ledger
Short side
Legal
Short side
Letter
Long side
LetterR
Short side
Invoice
Long side
InvoiceR
Short side
Foolscap
Short side
Folio
Short side
Executive
Short side
COM-10
Short side
C5
Short side
DL
Short side
For paper feed of the multi bypass tray, the short side must be set
to the paper fed port regardless of paper size for making print data.
b. Paper feed port
Tray kind
Bypass
Tray
Tray 1
Tray 2
Tray 3
Tray 4
Capacity
100
sheets
250
sheets
250
sheets
250
sheets
250
sheets
A3
B4
A4
A4R
B5
B5R
A5
A5R
Ledger
Legal
Letter
LetterR
Invoice
InvoiceR
Foolscap
Folio
Executive
COM-10
C5
DL
Custom
∗ The number of trays supported depends on each model.
∗ When printing with the multi bypass tray, the printer board cannot
recognize the set paper direction, and therefore it regards that the
short side of paper would be set (vertical transport direction) to make
data.
c. Tray selection
Paper handling is controlled on the copier side. The printer board
sends the Video I/F command to the digital copier according to the
computer direction of the tray.
ABC...
ABC...
Side set to the 
paper feed port 
= Long side
Side set to the 
paper feed port 
= Short side
Transport direction
Transport direction
DM-2000
2  –  6
Page of 8
Display

Sharp DM-2000 (serv.man2) Service Manual / Specification ▷ Download

  • DOWNLOAD Sharp DM-2000 (serv.man2) Service Manual ↓ Size: 79.97 KB | Pages: 8 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Specification for the Sharp DM-2000 (serv.man2) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp DM-2000 (serv.man2) Copying Equipment. Information contained in Sharp DM-2000 (serv.man2) Service Manual / Specification (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.