DOWNLOAD Sharp DM-2000 (serv.man2) Service Manual ↓ Size: 79.97 KB | Pages: 8 in PDF or view online for FREE

S-S (1st step)

80% (document replacement rate)

Condition: With SPF

Max. number of multi copy

99 sheets

Warmup time

Approx. 35 sec
(Condition: Standard condition)

Pre-heat

Available

Fixed magnification ratio

50, 64, 77, 95, 100, 121, 129, 141,
200%

Zooming

50 

∼ 200%

Independent
zooming/vertical

Available (50 

∼ 200%)

Independent zooming
(horizontal)

Available (50 

∼ 200%)

Density mode

Auto/Manual/Photo

No. of manual
adjustment

5 steps (Manual/Photo)

Toner save mode

Set by the user program

Void area

Lead edge 1 

∼ 4 mm, rear edge 4 mm or less,

both side 4 mm or less

Image loss

Max. 5/32" (4 mm) (leading and trailing edges)
Max. 5/32" (4 mm) (along other edges in total)

Standard/Option

Not installable

Paper exit
section capacity

Face down 250 sheets

Job separator

Job separator, Standard provision

Upper: FAX/Printer, Lower: Copier
Upper: 100 sheets, Lower 150 sheets

Full detection

Available (Job separator)

Finishing

Electronic sort board: Option (DM-EB1)

Electronic sort
capacity

8.5" 

× 11" standard document 60 sheets

Offset function

Available (by the shifer)

Staple function

None

Electronic sort

Sorting

60 sheets of A4 (8.5" 

× 11")

standard documents

Grouping

60 sheets of A4 (8.5" 

× 11")

standard documents

Rotation copy

If there is paper of same size as the document,
the image is rotated to copy even though the
paper is set in the different direction from the
document direction.

2 in 1, 4 in 1

Copies of 2 pages or 4 pages are integrated
into one surface. Divided by solid lines,
(Selectable by the user program.)

Edge erase

Images surrounding the document are erased
when copying. (Adjustable in 0 

∼ 20 mm (5 mm

step)/0" 

∼ 1" (1/4" step) by the user program.)

Center erase

The image at the center is erased when
copying. (Adjustable in 0 

∼ 20 mm (5 mm

step)/0" 

∼ 1" (1/4" step) by the user program.)

Margin shift

Binding margin is made at the left edge of the
set documents.

APS

(APS not available by flowing in
during use of SPF)

AMS

(AMS not available by flowing in
during use of SPF)

Duplex

Document count

Sorter

When the electronic sort board
installed.

Independent zooming

Vertical/Horizontal: 50 

∼ 200%

1 set 2 copy

Enlargement inhibited, inhibited
during the use of SPF

Binding margin

Shift width 9 mm/1/4"

Edge erase

Adjustable 0 

∼ 20 mm/0" ∼ 1"

Black-white reversion

Whole surface only

2 in 1, 4 in 1

Rotation copy

Memory copy

Only one page memory installed.

Pre-heat function

Conditions set by the user program

Auto power shut off
function

Conditions set by the user program

Auto tray switching

Message display

(FAX/Printer extension)

User program

Total counter

    : When an option is installed
  

: Available   : 

Not 

available

Machine

Model

Power supply

250 sheets paper feed unit

DM-DE1

Supplied by the copier.

500 sheets paper feed unit

DM-DE2

Supplied by the copier.

SPF

DM-SP1

Supplied by the copier.

Electronic sorting kit

DM-EB1

Supplied by the copier.

Facsimile expansion kit

DM-FX1

Supplied by the copier.

2 MB FAX memory

AR-MM5

4 MB FAX memory

AR-MM6

8 MB FAX memory

AR-MM7

DM-2000

2  –  2

Photoconductor type

OPC (Organic Photo Conductor)

Photoconductor drum dia.

30 mm

Copy lamp

Xenon lamp

Developing system

Dry 2-component magnetic brush
development

Charging system

Saw teeth charging

Transfer system

(+) DC corotoron

Separation system

(–) DC corotoron

Fusing system

Heat roller

Cleaning system

Contact blade

Body

Body/Accessories (NIC board is separately
packed.)

External dimensions
(W 

× D × H)

590 

× 531 × 552 mm (including Platen)

Occupying area
(W 

× D)

590 

× 531 mm

(When the multi bypass tray is installed.)

Weight

About 36.5 kg

Voltage

AC120V 

± 15%

Frequency

50/60Hz common

Max. power consumption

About 1.5 KWh

∗ EnergyStar standard (The second level conformity)

Pre-heat

About 60 Wh

Auto power shut off

About 4.8 Wh

Resolution

Reading

400 dpi

Writing

600 dpi

Gradation

Reading

256 gradations

Writing

Binary

Item

Contents

Print speed

20 PPM

Resolution

600 dpi, 300 dpi (1,200 dpi equivalent by
smoothing)

Toner save

Available

Paper feed tray

Multi bypass tray
Tray 1, Tray 2, Tray 3, Tray 4 (Depends on
the machine and the option installation.)

Paper size

Multi bypass tray

A3, B4, A4R,
B5R, A5, 11" 

×

17", 8.5" 

× 14",

8.5" 

× 11"R, 8.5"

× 5.5"R, 8.5" ×
13", 8.3" 

× 13",

7.25" 

× 10.5"R,

DL, C5, COM10

Tray
1 

∼  4

11" 

× 17", 8.5" × 14", 8.5" × 11",

8.5" 

× 11"R, 8.5" × 5.5", 8.5" ×

13"

Paper exit

Face down system

Shifter

Available

Page
description
language
(standard)

PCL6 emulation
PCL5e emulation
PostScript Level 2 emulation

Dot emulation

None

Page protection
function

Available

Interface

Standard

IEEE1284
port

Compatibility mode

Nibble mode

Expansion
slot

Expansion slot for
Print Server Card
×  1

Option

10/100
Base TX

TCP/IP, IPX/SPX

Interface cable

Use IEEE1284 conforming parallel cable.
(shielded and grounded)

Max. length

Within 3.0 m

Interface select

Auto

Emulation select

Auto

Plug and play

Conforming (only with Windows 95/98)

Printer driver

PCL

6

PCL

5e

PS2

Microsoft Windows 3.1

Microsoft Windows 95

Microsoft Windows 98

Microsoft Windows
NT4.0

Macintosh OS version
7.5 or later

Network control
software

Printer Administration Utility

Built-in fonts

Outline 45 fonts (PCL6 compatible)
Outline 35 fonts (PS2 compatible)

DM-2000

2  –  3

Item

Contents

Screen font

Outline 31 fonts (PCL6 compatible) for
Windows
Outline 35 fonts (PS2 compatible) for
Windows

Memory

Standard

8 MB

Max.

136 MB

Expansion slot

DIMM slot 

×  2

Expansion memory
(For details, refer to
the descriptions below.)

64 MB, 32 MB,
16 MB
(Commercially
available 168 pin
EDO DIMM 60ns
or faster used)

Conforming PC

IBM PC-AT compatible
Apple Macintosh Computer

OS

PCL6

PCL5e

PS2

IBM
PC/AT

Microsoft Windows 3.1

Microsoft Windows 95

Microsoft Windows 98

Microsoft Windows NT4.0

Macintosh

OS 7.5 or lator

Printer driver name

Name on PC screen

PCL5e for Windows 3.1/95/98

SHARP DM-2000
Series PCL5e

PCL5e for Windows NT4.0

PCL6 for Windows 95/98

SHARP DM-2000
Series PCL6

PCL6 for Windows NT4.0

PostScript Level2 for Windows
3.1/95/98

SHARP DM-2000
Series PS2

PostScript Level2 for Windows NT4.0

Item

PCL6

PCL5e

Copies

1 to 999

Orientation

Portrait, Landscape

Document Style

1-Sided, 2-Sided (Book), 2-Sided
(Tablet)

Paper Source

Auto, Tray 1, Tray 2, Tray 3, Tray
4, Bypass Tray

Paper Size

A3 (297 

× 420 mm), B4 (257 ×

364 mm), A4 (210 

× 297 mm), A5

(148 

× 210 mm), B5 (182 × 257

mm), Ledger (11" 

× 17"), Letter

(8.5" 

× 11"), Legal (8.5" × 14"),

Executive (7.25" 

× 10.5"), Folio

(8.3" 

× 13"), Invoice (5.5" × 8.5"),

Foolscap (8.5" 

× 13"), DL, C5,

COM10, Custom Paper

N-Up Printing

1-Up, 2-Up, 4-Up

Border

On, Off

Fit to Page

On, Off

Page Protection

On, Off

Toner Save Mode

On, Off

Item

PCL6

PCL5e

Smoothing

On, Off

Resolution Settings

600 dpi, 300 dpi

Graphics Mode

HP-GL/2 (Vector), Raster

Half Tone

Photo Images, Line Art, Scanned
Images

Font Source

Resident Fonts, Download Fonts

True Type Mode

Download as True Type, Download
as bitmap font, Print as graphics

Input Tray

Two Trays, Three Trays, Four
Trays

Duplex Capability

Yes, No

Installed RAM

8 MB, 24 MB, 40 MB, 56 MB, 72
MB, 88 MB, 104 MB, 136 MB

Set
content of
custom
paper

Unit

0.01", 0.1 mm

Width

1000 to 2969
(In the case of 0.1 mm)
394 to 1169 (In the case of 0.01")

Length

1480 to 4318
(In the case of 0.1 mm)
583 to 1700 (In the case of 0.01")

Set
content of
water mark

Position

Depends on the paper size.
MAX Short –5.84" 

∼ 5.84"

   

Long 

–8.5" 

∼ 8.5"

Size

6 

∼ 900

Angle

±90˚

Text

TOP SECRET
CONFIDENTIAL
DRAFT
ORIGINAL
COPY

Edit Fonts

Refer to the following Font List.

Edit Density

0 

∼ 255

Transparent
Text

Yes, No

On First
Page Only

Yes, No

As Outline
Only

Yes, No (Only when Transparent
Text is OFF.)

(4) LCD display
a. LCD message

Status

LCD display

Content

Online

Online

AUTO

Auto select to
emulation

PCL

PCL

PS2

PS2

HEX

HEX

Error

Data Loss
Error

Press ENTER

Memory
Full

Press ENTER

Out of
Paper

Tray 1 <Paper Size>

When the paper
feed tray is
selected to other
than AUTO.

Tray 2 <Paper Size>

Tray 3 <Paper Size>

Tray 4 <Paper Size>

Bypass
<Paper Size>

Tray <Paper Size>

When the paper
feed tray is
selected to AUTO.

DM-2000

2  –  4

Status

LCD display

Content

Error

Check
Panel

Toner empty
Drum replacement
Cover open
Service call error

Clear
Paper Path

Paper jam
Paper exit tray full

User
setting

Main Menu

Copies

Printing of the set
quantity is made.

Resolution

Printing at the set
resolution is made.

Smoothing

Smoothing
function setting.

Toner Save

Toner save mode
setting

Page Protection

Setting of page
protection function

2-Sided Printing

Setting of duplex
function and
binding direction

Paper Source

Tray select

Paper Size

Paper size select

Orientation

Setting of print
direction

Emulation

Emulation setting

Network
Menu

Set IP Address

IP address
setting is made.

Set Subnet Mask

Subnet Mask
setting is made.

Set Default Gateway

Default Gateway
setting is made.

Enable TCP/IP

Enable/Disable
TCP/IP

Enable Netware

Enable/Disable
Netware

Enable EtherTalk

Enable/Disable
EtherTalk

Reset to Defaults

Reset Print
Server Card to
default

PS2 Menu

Print PS2 Error

Setting of printing
in case of PS
Error

Interface
Menu

I/O Time Out

If data reception
is not completed
within the set
time, it is judged
as a time out
error.

Test
Printing
Menu

Configuration Page

Configuration
page is printed.

PCL Font List

PCL6 Font page
is printed.

PS2 Font List

PS2 Font page is
printed.

b. LED display

ON LINE light

Extinguished

Indicates that the printer is off-
line and data cannot be
transferred or printed. Make
settings from the operation
panel in this mode. Note,
however, that you cannot make
settings if the “Data Remaining”
message is displayed.

Lit

Indicates that the printer is on-
line and data can be transferred
and printed.

DATA light

Extinguished

Indicates that there is no data
being received or processed.

Lit

Indicates that the printer is
receiving or processing print
data.

Blinking

Indicates that there is print data
remaining in memory that has
not yet been printed.

c. Operation keys

LINE key

Changes between the on-line and off-line
modes.
When the printer is on-line, it can receive
data from the computer with which it is
connected.
When the printer is off-line, you can use
operation panel keys to make print settings.
Note, however, that you cannot make settings
if the “Data Remaining” message is displayed.

MENU key

Used to show setting menus on the display in
sequence.

∗

ITEM key

Used to show the setting items of the
selected menu in sequence.

∗

Left arrow key
Right arrow key

Used to change the value of any item.

∗

ENTER key

Used to enter a new value.

∗ Invalid when the printer is on-line.

10/100 Base TX

TCP/IP, IPX/SPX, Ether Talk

10 Base T/2

TCP/IP, IPX/SPX, Ether Talk

(6) PC environment
a. In the case of IBM PC/AT or compatible computers

Computer 
Type

IBM PC/AT or compatible computer equipped with a
bi-directional parallel interface and CD-ROM drive

Operating 
System

Windows 95, Windows 98, Windows NT4.0
Windows 3.1

CPU

Windows 95: 486SX or better
Windows 98: 486DX/66MHz or better (Pentium or
better is recommended.)
Windows NT4.0: 486/25MHz or better

RAM

Windows 95: 8 MB or more (12 MB or more is
recommended.)
Windows 98: 16 MB or more (32 MB or more is
recommended.)
Windows NT4.0: 16 MB or more

DM-2000

2  –  5