DOWNLOAD Sharp DM-2000 (serv.man13) Service Manual ↓ Size: 487.6 KB | Pages: 28 in PDF or view online for FREE

Model
DM-2000 (serv.man13)
Pages
28
Size
487.6 KB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Copying Equipment / DM2000-Operation Manual Part4
File
dm-2000-sm13.pdf
Date

Sharp DM-2000 (serv.man13) User Manual / Operation Manual ▷ View online

61
OPTIONAL EQUIPMENT
Sort/group
If an optional electronic sorting kit is installed, the copier will have two
sorter modes for different copying jobs: one sorts copies into sets matching the sequence of the
originals and the second groups copies by originals.
The sort/group feature cannot be used with the dual page copy feature.
To change the SORT/GROUP mode, press the SORT/GROUP key to select the desired mode.
The capacity of the paper output tray is 250 sheets (150 sheets if an optional job separator tray
kit (AR-TR2) is installed). When the number of copies output reaches this limit in a sort or a
group copy run, copying will stop. (This function is selectable; the machine will stop or not
stop. The factory default setting is not to stop.)
Remove the copies from the paper output tray and press the START key to resume copying.
ELECTRONIC SORTING KIT (AR-EB3)
Electronic sorting kit (AR-EB3)
Sort mode
Each set of copies will be sequentially delivered to the
paper output tray.
Group mode
All copies of the same originals will be grouped in the
paper output tray.
Offset stack
If the offset stack mode is enabled using user program
No. 19, each copy will be offset by approximately 25 mm.
When copying in the sort mode, each collated set of
copies will be stacked offset from the previous set.
When copying in the group mode, copies will be offset
and stacked in groups of multiple copies from the same
original.
If the offset stack mode is disabled, copies will not be
offset.
The offset stack mode is enabled in the factory default
setting.
1
2
3
1
1
1
1
2
1
Offset mode
1
1
2
3
1
Non-offset mode
1
2
3
3
2
1
3
2
1
3
2
1
1
2
3
3
3
2
3
2
1
1
1
2
62
OPTIONAL EQUIPMENT
Copying in the sort mode
When copying in the sort mode, the original image will be stored in the copier
memory each time an original is scanned and copying will start after all
originals have been scanned. To copy in the sort mode, an optional single pass
feeder (AR-SP2) is needed.
1
Set the originals face up in the document feeder tray.
The original table cannot be used for sort copying.
2
Press the SORT/GROUP key to select the SORT mode.
3
Ensure that the desired copy paper size is selected.
4
Set the number of copies and press the START key.
Copying will start after the originals have been scanned. Up to 30
sheets of A4 originals can be scanned.  (If originals are fed continuously
using the stream feeding mode, up to approximately 60 sheets of A4
originals can be scanned. However, when copying originals which
require more memory such as photographs, the number of originals
which can be scanned will be less.) When the memory becomes full of
scanned original image data, the ORIGINAL DATA indicator will
blink.
When the ORIGINAL DATA indicator blinks, the copier will stop
scanning. To start copying of scanned originals, press the START key.
To cancel copying, press the CLEAR or CLEAR ALL key.
ELECTRONIC SORTING KIT (AR-EB3)
Electronic sorting kit (AR-EB3)
63
OPTIONAL EQUIPMENT
4 in 1 copying
2 in 1 copying
Pattern
Pattern
Pattern
Pattern
Pattern
Pattern
Pattern
Pattern
The 2 in 1 or 4 in 1 feature is used to copy 2 or 4 originals, collectively in a
specified order, onto one sheet.
To use these features, an optional single pass feeder (AR-SP2) is needed.
These features cannot be used with the dual page copying, XY zoom,
erase, or margin shift features.
Copies can be made with or without the border lines shown in the
illustration. See USER PROGRAMS on page 37.
The order of originals which will be arranged on the copies can be selected
by user programs. There are two patterns of layout for 2 in 1 copying and
four patterns of layout for 4 in 1 copying. See page 37.
The 2 in 1 or 4 in 1 feature operates only in the sort or group mode. If the
2 in 1 or 4 in 1 feature is selected when either the sort or group mode has
not been selected, the group mode will be automatically selected.
2 in 1 or 4 in 1
1
Set the originals face up in the document feeder tray.
The original table cannot be used for the 2 in 1 or 4 in 1 feature.
2
Use the TRAY SELECT key to select the paper tray with
the desired paper size.
The bypass tray and any tray with non-standard size paper cannot be
used with the 2 in 1 or 4 in 1 feature.
3
To confirm or set the layout pattern for 2 in 1 copying,
first ensure that both the 2 IN 1 and 4 IN 1 indicators are
not lit then press and hold the 2 IN 1 / 4 IN 1 key for more
than 5 seconds.
The 2 IN 1 indicator will blink and the currently selected layout pattern
number will blink in the copy quantity display.
To confirm or set the layout pattern for 4 in 1 copying,
use the 2 IN 1 /  4 IN 1 key to light the 2 IN 1 indicator then
press and hold the 2 IN 1 / 4 IN 1 key for more than 5
seconds.
The 4 IN 1 indicator will blink and the currently selected layout pattern
number will blink in the copy quantity display.
ELECTRONIC SORTING KIT (AR-EB3)
Electronic sorting kit (AR-EB3)
64
OPTIONAL EQUIPMENT
ELECTRONIC SORTING KIT (AR-EB3)
Electronic sorting kit (AR-EB3)
4
Enter the desired pattern number using a numeric key.
The entered number will blink in the copy quantity display. For layout
pattern numbers, see the previous page.
5
Press the START key.
The entered number will light up steadily.
6
Press the 2 IN 1 / 4 IN 1 key to complete the selection.
The copy ratio will be calculated automatically. If the calculated copy
ratio is less than 50%, part of original image may not be copied because
the smallest copy ratio is 50%.
7
Set the number of copies.
8
Press the START key.
Copying will start after the originals have been scanned. Up to 30
sheets of A4 originals can be scanned. (If originals are fed continuously
using the stream feeding mode, up to approximately 60 sheets of A4
originals can be scanned. However, if photographs are copied, the
number of originals which can be scanned is less.) When the memory
becomes full of scanned original image data, the ORIGINAL DATA
indicator will blink.
When the ORIGINAL DATA indicator blinks, the copier will stop
scanning. To start copying of scanned originals, press the START key.
To cancel copying, press the CLEAR or CLEAR ALL key.
Page of 28
Display

Click on the first or last page to see other DM-2000 (serv.man13) service manuals if exist.