DOWNLOAD Sharp DM-2000 (serv.man13) Service Manual ↓ Size: 487.6 KB | Pages: 28 in PDF or view online for FREE

Model
DM-2000 (serv.man13)
Pages
28
Size
487.6 KB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Copying Equipment / DM2000-Operation Manual Part4
File
dm-2000-sm13.pdf
Date

Sharp DM-2000 (serv.man13) User Manual / Operation Manual ▷ View online

57
OPTIONAL EQUIPMENT
SINGLE PASS FEEDER (AR-SP2)
The single pass feeder (SPF) holds up to 30 originals for automatic feeding.
Single pass feeder (AR-SP2)
PART NAMES
Specifications
Acceptable
Weight:
56 to 90 g/m
2
originals
Size:
A5 to A3
Capacity:
Up to 30 sheets provided the total aggregate
thickness does not exceed 4 mm
Detectable original
A5, A4, A4R, B4, A3
sizes
Power supply
Drawn from the copier
Weight
Approx. 5.3 kg
Dimensions
583 mm (W) x 435 mm (D) x 131 mm (H)
Document feeder tray
Left feeding roller cover
Original guides
Exit area
Right feeding roller cover
As a part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
58
OPTIONAL EQUIPMENT
SINGLE PASS FEEDER (AR-SP2)
Using the SPF
Be sure to remove any staples or paper clips from the
originals.
Damaged or crumpled originals may misfeed in the SPF.
It is recommended that these originals be copied from the
original table.
For best feeding of originals which have binding holes
punched into them, insert them so that the holes are
positioned to the right or along the side guides.
Special originals such as transparency film and tracing
paper should not be fed through the SPF but should be
copied from the original table.
Image loss (max. 4 mm) can occur at the leading and
trailing edges of the copies. Also image loss (max. 4 mm
in total) can occur along the other edges of the copies.
Single pass feeder (AR-SP2)
Stream feeding mode
If the stream feeding mode has been enabled using user program
No. 4, the SPF indicator will continue to blink for approximately 5
seconds after feeding of all originals is completed. While this
indicator is blinking, any new originals placed in the SPF will be
fed and copied automatically. See page 37, USER PROGRAMS.
1
Ensure that no original is left on the original table.
2
Adjust the original guides to the size of the originals.
3
Set the originals face up in the document feeder tray.
The SPF indicator will light up. If this indicator does not light up, the
originals are not properly set or the SPF is not properly closed.
The ORIGINAL SIZE indicator for the detected original size will light
up, and the paper tray with the corresponding paper size will be
automatically selected.
The auto paper select function can be disabled using user program No.
8. If this function has been disabled, use the TRAY SELECT key to
select the desired paper tray. See page 37, USER PROGRAMS.
To copy onto a different size paper, use the TRAY SELECT key to
make the selection.
The bypass tray cannot be automatically selected.
4
Set the number of copies and press the START key.
Press the CLEAR key to stop copying in the middle of a run.
If the offset stack mode is enabled using user program No. 19, copies
will be output in the group mode. Groups of copies of each original will
be offset from the previous group.
59
OPTIONAL EQUIPMENT
SINGLE PASS FEEDER (AR-SP2)
Misfeed removal
Location A
Location B
Location C
Single pass feeder (AR-SP2)
If an original misfeed occurs in the SPF, the copier will
stop and the red indicator which indicates an original
misfeed will blink.
1
Open the left feeding roller cover and pull the original
gently to the left and out from the document feeder tray.
Close the left feeding roller cover.
2
If the misfed original cannot be removed in step 1, open
the right feeding roller cover and remove the misfed
original. Close the right feeding roller cover.
3
If the misfed original cannot be removed in steps 1 and
2, remove the misfed original from the exit area. Open
the document feeder cover and rotate the roller in the
direction indicated by the arrow if needed.
If the misfed original cannot be easily removed from the
exit area, open the front part of the document feeder tray
to remove the original.
4
Open and close the document feeder cover to cancel the
misfeed location indicator.
After misfed originals are removed, a number may
appear in the copy quantity display, indicating the
number of originals that must be returned to the
document feeder tray. Return the originals and press
the START key to resume copying.
A
C
B
Left feeding roller cover
Right feeding roller cover
Roller
60
OPTIONAL EQUIPMENT
Electronic sorting kit (AR-EB3)
Original
Paper
Copy
Rotation copying
If user program No. 7 is set, the image of the original will rotate when the
orientation of the original does not match that of the copy paper. Rotation
copying will function only if the auto paper select mode or auto copy ratio
mode has been selected. Even if user program No. 7 is not set, rotation
copying will function when the 2 in 1 or 4 in 1 function is selected. However,
if enlargement copying onto a paper size larger than A4 is performed, the
image cannot be rotated.
When this occurs, the detected size and orientation of the original will be
indicated by a steadily lighted indicator and a flashing indicator will show the
required orientation of the original. The original must be rotated 90
°
 to match
the flashing indicator to prevent image loss on the copies.
See page 38.
Example: Copying from an A3 original onto A4 paper
ELECTRONIC SORTING KIT (AR-EB3)
If an electronic sorting kit (AR-EB3) is installed, the copier can perform
several additional useful functions. These functions are 2 in 1 and 4 in 1,
erase, margin shift, and sort/group functions. Also, rotation copying can be
performed and a multiple number of originals can be scanned and stored into
the memory. The memory can be expanded by adding commercially available
memories recommended by SHARP. For details, contact your dealer.
To use the 2 in 1 or 4 in 1 and sort/group functions, an
optional single pass feeder (AR-SP2) is needed. When
installing an electronic sorting kit, it is recommended to
install a single pass feeder.
Page of 28
Display

Sharp DM-2000 (serv.man13) User Manual / Operation Manual ▷ Download

  • DOWNLOAD Sharp DM-2000 (serv.man13) Service Manual ↓ Size: 487.6 KB | Pages: 28 in PDF or view online for FREE
  • Here you can View online or download the User Manual / Operation Manual for the Sharp DM-2000 (serv.man13) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp DM-2000 (serv.man13) Copying Equipment. Information contained in Sharp DM-2000 (serv.man13) User Manual / Operation Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.