DOWNLOAD Sharp DM-2000 (serv.man12) Service Manual ↓ Size: 216.41 KB | Pages: 18 in PDF or view online for FREE

Model
DM-2000 (serv.man12)
Pages
18
Size
216.41 KB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Copying Equipment / DM2000-Operation Manual Part3
File
dm-2000-sm12.pdf
Date

Sharp DM-2000 (serv.man12) User Manual / Operation Manual ▷ View online

46
GENERAL
 INFORMA
TION
USER MAINTENANCE
Proper care is essential for clean, sharp copies. Please take a few minutes to
regularly clean your copier.
Original table and platen cover
Stains or dirt on the original table or platen cover will
also be copied. Wipe the original table and platen cover
with a soft, clean cloth.
If necessary, dampen the cloth with water. Do not use thinner,
benzene, or similar volatile cleaning agents.
User maintenance
If an optional SPF is installed, wipe the scanning window on the
original table.
Transfer charger
If copies start becoming streaky or blotchy, the transfer
charger may be dirty. Clean the charger. The cleaning
method is described on page 71, TRANSFER CHARGER
CLEANING.
Bypass tray paper feed roller
If misfeeds occur frequently when feeding postcards,
envelopes, thick paper, etc. through the bypass tray,
wipe the blue paper feed roller at the feed slot of the
bypass tray with a soft, clean cloth dampened with
alcohol or water.
Paper feed roller
47
GENERAL
 INFORMA
TION
Problem
  Solution
Copier plugged in?
Power switch ON?
Copy density properly adjusted?
Is the original placed face down?
Paper too heavy?
Paper damp?
Is transfer charger clean?
Non-standard paper used?
Paper properly installed?
Pieces of paper inside copier?
Paper curled or damp?
Has the platen cover been
completely opened when the
original is placed on the original
table?
Does the original include large
black solid area?
Plug the copier into a grounded outlet.
See page 8.
Turn the power switch ON.
See page 14.
See pages 14 and 26.
Place the original face down on the original
table.
Use copy paper within the specified range.
See page 50.
Replace with dry copy paper.
Be sure to store copy paper in a dry location.
See page 51.
Clean the transfer charger.
See page 71.
Use standard paper. If using special paper,
feed the paper through the bypass tray.
See pages 18 and 50.
Make sure the paper is properly installed. See
pages 10 and 18.
Remove all pieces of misfed paper.
See page 31.
Store copy paper flat in the wrapper in a dry
location. See page 51.
Open the platen cover completely and then
place the original on the original table.
Close the platen cover.
If the original includes large black solid area,
the original size may not be detected. Use the
TRAY SELECT key to select the desired size.
Copier does not operate.
Copies are too dark or
too light.
Blank copies
Paper misfeeds frequently.
Copies smear if rubbed.
COPIER TROUBLE?
Copier trouble?
Striped copies
Original size not selected
automatically.
48
GENERAL
 INFORMA
TION
Problem
  Solution
Original table or platen cover
dirty?
Original smudged or blotchy?
Is the 
 indicator on?
Is the COPY indicator off?
Is copying, printing or facsimile
printing being performed?
Is the POWER SAVE indicator
blinking?
Is only the POWER SAVE
indicator on?
Is the COPY indicator off?
Is 
 steadily lit in the copy
quantity display?
Is the 
 indicator on?
Clean regularly. See page 46.
Use a clean original.
Maintenance is required. Contact your SHARP
service centre as soon as possible.
Use the COPY/FAX key to select the COPY
mode. See Note below.
Set the paper size after copying, printing or
facsimile printing is complete.
Wait until warm-up is complete.
Warm-up time is approximately 35 seconds.
The copier is in the auto power shut-off mode.
Press the START key. See page 44, POWER
SAVE MODES.
Use the COPY/FAX key to select the COPY
mode. See Note below.
The copier is in the auditing mode.
Enter your account number using the numeric
keys. See page 13.
Copy paper is needed. See page 10, LOADING
COPY PAPER.
Copies are smudged
or dirty.
Power is on but copying
is not possible.
Copier trouble?
COPIER TROUBLE?
Paper size for a paper
tray cannot be set.
COPY/FAX key
The COPY/FAX key is used to switch
between the FAX and COPY modes.
For details, see the MULTI ACCESS
manual.
49
GENERAL
 INFORMA
TION
The TD cartridge is not installed. Install the
TD cartridge.
Side cover is open.
Close the front and side covers securely.
The TD cartridge must be replaced. See page
27, TD CARTRIDGE REPLACEMENT.
A misfeed has occurred. See page 31,
MISFEED REMOVAL.
Toner replenishment takes up to 2 minutes.
Wait until the START key indicator stops
blinking.
Connect the copier to a power outlet which
is not used for other electric appliances.
Is 
 blinking in the copy
quantity display?
Is 
 steadily lit in the copy
quantity display?
Is the 
 indicator blinking?
Is the 
 indicator blinking?
Is the START key indicator
blinking?
Is the same power outlet used for
the lighting fixture and the copier?
Problem
  Solution
Power is on but copying
is not possible.
Lighting fixture flickers.
Copier trouble?
Self-diagnostic function
An automatic self-diagnostic function is built into the copier. Should the
copier malfunction, the self-diagnostic function will locate the problem and
stop the copier to prevent damage. An alphanumeric code will appear in the
copy quantity display.
Example
Should the copier completely stop and a letter and a number appear alternately,
contact your SHARP service centre immediately.
COPIER TROUBLE?
Be sure to use only genuine SHARP parts and supplies.
Please contact your SHARP service centre immediately if a problem persists
after checking the above.
Page of 18
Display

Click on the first or last page to see other DM-2000 (serv.man12) service manuals if exist.