DOWNLOAD Sharp DM-2000 (serv.man11) Service Manual ↓ Size: 406.13 KB | Pages: 10 in PDF or view online for FREE

Model
DM-2000 (serv.man11)
Pages
10
Size
406.13 KB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Copying Equipment / DM2000-Operation Manual Part2
File
dm-2000-sm11.pdf
Date

Sharp DM-2000 (serv.man11) User Manual / Operation Manual ▷ View online

31
ST
A
TUS
INDICA
T
ORS
The copier will stop when a misfeed occurs. The misfeed
(
) indicator will blink, and blinking red misfeed location
indicators will indicate the approximate misfeed location.
If paper is accidentally torn during removal, be sure to
remove all pieces.
Be careful not to damage the photoconductive drum.
For misfeeds in optional equipment, see their respective
sections of the operation manual.
First confirm the misfeed location.
MISFEED REMOVAL
 Misfeed removal
Misfeed in the bypass tray
1
Gently pull the misfed paper out.
2
Lift slightly on the side cover and slide the cover out
until it stops. Close the side cover by pressing the
handle on the cover.
The misfeed (
) indicator will go out.
Misfeed in the copier
1
Open the bypass tray. Lift slightly on the side cover and
slide the cover out until it stops.
(
      
P.59)
(
      
P.31, 34)
(
      
P.35)
(
      
P.69)
32
ST
A
TUS
INDICA
T
ORS
MISFEED REMOVAL
 Misfeed removal
If the misfed paper is seen from this 
side, proceed to “C. Misfeed in the 
transport area”.
If paper is misfed here, proceed to 
“B. Misfeed in the fusing area”.
If paper is misfed here, proceed to 
“A. Misfeed in the paper feed area”.
2
Check the misfeed location. Remove the misfed paper
following the instructions for each location in the
illustration below.
A. Misfeed in the paper feed area
1
Push gently on both sides of the front cover to open the
cover.
2
Carefully remove the misfed paper. Turn the roller
rotating knob in the direction of the arrow to assist in
removing it.
The fusing unit is hot. Take care in removing paper.
Do not touch the surface of the drum (green portion) of
the drum cartridge when removing the misfed paper.
Doing so may damage the drum and cause smudges
on copies.
3
Close the front cover by pushing both sides with your
hands and then close the side cover by pressing the
handle on the cover.
The misfeed (
) indicator will go out.
When closing the covers, be sure to close the front
cover securely and then close the side cover. If the
covers are closed in the wrong order, the covers may
be damaged.
B. Misfeed in the fusing area
1
Push gently on both sides of the front cover to open the
cover.
Roller rotating knob
33
ST
A
TUS
INDICA
T
ORS
MISFEED REMOVAL
 Misfeed removal
2
Turn the roller rotating knob in the direction of the
arrow.
3
Carefully remove the misfed paper. Lower the fusing
unit release levers to allow easier removal. Return the
release levers to their operating positions.
The fusing unit is hot. Take care in removing paper.
Do not touch the surface of the drum (green portion)
of the drum cartridge when removing the misfed
paper. Doing so may damage the drum and cause
smudges on copies.
Be careful about unfixed toner on the misfed paper
not to soil your hands or clothes.
4
Close the front cover by pushing both sides with your
hands and then close the side cover by pressing the
handle on the cover.
The misfeed (
) indicator will go out.
When closing the covers, be sure to close the front
cover securely and then close the side cover. If the
covers are closed in the wrong order, the covers may
be damaged.
C. Misfeed in the transport area
1
Open the paper guide by pressing down the projection
on either side of the guide and remove the misfed paper.
The fusing unit is hot. Take care in removing paper.
2
If the misfed paper cannot be removed by the previous
step but is visible in the paper output area, remove the
paper by pulling it into the paper output area.
Roller rotating knob
Fusing unit release lever
34
ST
A
TUS
INDICA
T
ORS
MISFEED REMOVAL
 Misfeed removal
3
Close the side cover by pressing the handle on the
cover.
The misfeed (
) indicator will go out.
Misfeed in the upper paper tray
Before opening the upper paper tray, be sure to open the bypass tray, lift
slightly on the side cover and slide the cover out until it stops, and then
perform steps 1 to 3 described in the “A. Misfeed in the paper feed area”
section.
1
Gently lift and pull out the upper paper tray and remove
the misfed paper.
2
Close the paper tray.
3
Lift slightly on the side cover and slide the cover out
until it stops. Close the side cover by pressing the
handle on the cover.
The misfeed (
) indicator will go out.
Page of 10
Display

Click on the first or last page to see other DM-2000 (serv.man11) service manuals if exist.