DOWNLOAD Sharp DM-2000 (serv.man10) Service Manual ↓ Size: 880.59 KB | Pages: 28 in PDF or view online for FREE

q

Place the original on the original table and close the
platen cover before copying starts.

w

Place the document to be copied here.

e

Use to move the copier.

r

Press to turn copier power on and off.

t

All copier controls are located here for easy operation.

y

Finished copies are deposited in the paper output tray.

u

Open to remove misfeeds and for copier servicing.

i

Each tray holds 250 sheets of copy paper.

o

Open to remove misfeeds and to service the copier.

!0

Lift and pull to open the side cover.

!1

Adjust to the width of the copy paper.

!2

Special papers (including transparency film) and copy
paper can be fed from the bypass tray.

!3

Pull out when feeding large paper such as B4 and A3.

!4

Use to clean the transfer charger.

q

w

e

e

r

t

y

!2
!3

o

u

!0

!1

i

!4

Part names and functions

!5

Hold to pull out the drum cartridge.

!6

Copy images are formed on the photoconductive drum.

!7

Use to unlock the TD cartridge.

!8

Lift to remove the TD cartridge.

!9

Contains toner.

@0

Turn to remove misfed paper.

@2

@1

@0

!7

!8

!9

!5

!6

Part names and functions

@1

Lower to remove misfed paper.

The fusing unit is hot.
Take care in removing paper.

@2

Open to remove misfed paper.

Operation manual . . . . . . . . . . . . . . . . . . . . . . .  1
TD cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
Charger cleaner . . . . . . . . . . . . . . . . . . . . . . . .  1

q

INTERRUPT key and indicator (p. 25)

Interrupts a copy run.

w

Displays the specified copy quantity during the ready
condition and displays the copy countdown as copies
are made. Also see items 

r and @1.

e

ZOOM indicator (p.17)

Lights up when a zoom ratio is set.

r

Copy ratio display key (p. 17)

Press and hold down during standby to display the copy
ratio in the copy quantity display.

t

Zoom keys (p. 17)

Use to select any reduction or enlargement copy ratio
from 50% to 200% in 1% increments.

y

PAPER SIZE ENTER key (p.12)

Use to set the paper size in a tray.

u

AUDIT CLEAR key (p.13)

Closes an open account.

i

Light up to show the selected copy paper size.

o

: Maintenance indicator (p.36)
: TD cartridge replacement required indicator

(p.27)

: Drum replacement required indicator (p.29)
: Paper required indicator (p.10)
: Misfeed indicator (p.31)

!0

POWER SAVE indicator (p. 44)

Lights up when the copier is in a power save mode.

!1

SPF indicator (p. 58)

Lights up when originals are set in the optional SPF
tray.

!2

Indicates the upper paper output tray is full. (When an
optional job separator tray kit is installed)

!3

B/W REVERSE key and indicator (p. 23)

Press to reverse the black and white areas.

!4

XY-ZOOM key and indicator (p. 21)

Press to change the horizontal and vertical copy ratios
independently.

!5

SORT/GROUP key and indicators (p. 61)

Press to select the sort or group mode when an optional
electronic sorting kit and an optional SPF are installed.

!6

Blinks when the memory becomes full of scanned
original image data. (Used when an optional electronic
sorting kit and an optional SPF are installed)

!7

2 IN 1 / 4 IN 1 key and indicators (p. 63)

Press to select the 2 in 1 or 4 in 1 mode. (Only available
when an optional electronic sorting kit and an optional
SPF are installed)

!8

AUTO/MANUAL/PHOTO key and indicators
(p. 14)

Use to sequentially select the exposure modes: AUTO,
MANUAL, or PHOTO.

!9

Light and dark keys and indicators (p. 15)

Use to adjust the MANUAL or PHOTO exposure level.

@0

Use to select the desired copy quantity or to make user
program entries.

w

r

o

!1

!0

t

e

!8

@7 @8

#0

@2

@4

!9

@1

@3

@5

@6

@9

@0

y

u

!2

i

q

Not used for the copier features.

Part names and functions

@1

Use as part of numeric keys to enter copy quantity.
Press during a continuous copy run to display the
number of copies completed in the current run.
Press during standby to display the total output count.

Press and hold down the key.

12,345

 sheets output

1st display

2nd display

Note: A3 size copies are counted as two copies.

@2

Clears the copy quantity display or terminates a copy
run.

@3

Copying is possible when the indicator is on.
Press to start copying.

@4

Clears all selected settings and returns the copier to the
initial settings.

@5

PRESET RATIO selector keys and indicators
(p. 17)

Use to sequentially select preset reduction/enlargement
copy ratios: 50%, 70%, 81%, 86%, 100%, 115%, 122%,
141%, 200%.

@6

Use to input the original size.

@7

Paper of the proper size will be automatically selected
depending on the original size and selected copy ratio
when this indicator is on.

@8

TRAY SELECT key (p. 14)

Use to manually select a paper tray.

@9

Press for automatic copy ratio selection.

#0

Paper feed location/misfeed location indica-
tors (p. 31)

The selected paper feed location is shown by a lit
indicator (

).

The general location of misfed paper is shown by a
blinking red indicator (

).

#1

DUAL PAGE COPY key and indicator (p. 24)

Use to make individual copies of two originals placed
side by side on the original table.

#2

ERASE key and indicators (p. 65)

Press to select the edge erase and/or the centre erase
mode. (Only available when an optional electronic
sorting kit is installed)

#3

MARGIN SHIFT key and indicator (p. 67)

Shifts text or image on the copy to leave a binding
margin on the left side of the copy. (Only available when
an optional electronic sorting kit is installed)

The copier assumes the initial settings when it is first turned

on, when the CLEAR ALL (

) key is pressed, and ap-

proximately one minute* after the last copy is made in any
mode.

●

Copy ratio: 100%

●

Exposure: Automatic

●

Copy quantity: 0

●

All special copier modes: Off

●

Auto paper selection: On

●

Paper feed station: Previously selected paper tray

* This time (auto clear time) can be changed. See page 37,

USER PROGRAMS.

Part names and functions

!7

!6

!5

!3

#1

#2

#3

!4