DOWNLOAD Sharp AR-SP6 (serv.man2) Service Manual ↓ Size: 126.68 KB | Pages: 3 in PDF or view online for FREE

Model
AR-SP6 (serv.man2)
Pages
3 Few pages! See other manuals at the bottom of the first or last page.
Size
126.68 KB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Unpacking installation
File
ar-sp6-sm2.pdf
Date

Sharp AR-SP6 (serv.man2) Service Manual ▷ View online

AR-SP6/RP6
PRODUCT OUTLINE
– 1 –
[1] PRODUCT OUTLINE
It feeds originals automatically to allow continuous copying.
[2] SPECIFICATIONS
[3] UNPACKING AND INSTALLATION
1. Unpacking
For unpacking, refer to the figure below.
2. Installation
Turn the main switch of the copier to the “OFF” position and then
remove the power plug of the copier from the outlet.
remove it.
AR-RP6
AR-SP6
Document set direction
Face up
Document set position
Right/Center reference
Document transport 
system
Sheet through type
Document feed sequence Top take-up feed
Document size
AB series: A3 ~ A5
Inch series: 11 x 17 ~ 8.5 x 5.5
Document weight
56 ~ 90g/m
2
, 15 ~ 24lbs
Document set quantity
Max. 40 sheets (Stack range: within 4mm)
(90g/m
2
: Set capacity = 30 sheets)
Dimensions
583mm (W) x 435mm (D) x 133mm (H)
Weight
About 5.4 kg
About 5.0 kg
Power source
Sup pli ed from the
copier. (DC 24V)
Sup plie d  fro m th e
copier. (DC 24V, 5V)
Power consumption
26.4W
21W
Document size detection
Detection size
Japan: 
A3, B4, A4, A4R, B5, B5R,
A5
Inch series:  11 x 17, 8.5 x 14, 8.5 x 11,
8.5 x 11R, 8.5 x 5.5
EX AB series: A3,  B4,  A4,  A4R,  A5,  B5,
B5R, A5R
Mixture paper feed: Not available
Random paper feed: Not available
Document reverse
Allowed 
(without 8.5 x 5.5)
Not allowed
Display section (LED)
None
Document exchange 
speed
3
 S, 16 sheets/min (AR-160M)
3
 S, 20 sheets/min (AR-200M)
AR-SP6/RP6
UNPACKING AND INSTALLATION
– 2 –
2. Remove the right cabinet.
Remove the screws and remove the right cabinet.
3.  Remove the document glass and the right document 
glass holder.
Remove the screws, remove the document glass from the copier, and
then remove the right document glass holder.
4. Attach the SPF glass holder.
Fit the SPF glass holder to the document glass.
Attach the document glass to the copier and fix it with the screws.
5. Attach the right cabinet.
Reattach the right cabinet to its original position and fix it with the
screws.
6. Cut out the cut-out portion.
Cut out the cut-out portion of the rear cabinet with nippers or the like.
At this time, be careful about the orientation of the nippers so that the
cut plane of the rear cabinet is flat.
7. Attach the automatic document feeder.
Insert the hinge portions of the document feeder into the mounting por-
tions of the copier by holding the feeder at an angle toward the rear
side.
AR-SP6/RP6
UNPACKING AND INSTALLATION
– 3 –
8. Connect the relay connector.
Connect the harness of the automatic document feeder to the connec-
tor of the copier and tighten the screws on the connector.
9. Remove the filament tape.
Remove the filament tape located in the positions shown in the illustra-
tion.
10. Attach the intermediate tray. (AR-RP6 only)
Insert the intermediate tray all the way into the document feeder.
Insert the power plug of the copier to the outlet and turn on
the main switch of the copier.
11. Adjust the white compensation pixels.
• Open the automatic document feeder, execute simulation 63-7 refer-
ring to the service manual, and adjust the automatic white compensa-
tion pixels of the document feeder.
12. Check the copy magnification ratio.
•  Set an original on the document glass and copy it.
Then, set an original in the document feeder tray and copy it.
• If the magnification ratio of the copy from the document feeder is dif-
ferent from that of the copy from the document glass, execute simula-
tion 48-5 to carry out adjustment referring to the service manual.
13. Check the center displacement.
•  Set an original on the document glass and copy it.
Then, set an original in the document feeder tray and copy it.
• If the center of the copy image from the document feeder is different
from that of the copy image from the document glass, execute simu-
lation 50-12 to carry out adjustment referring to the service manual.
14. Check the top end position.
•  Set an original on the document glass and copy it.
Then, set an original in the document feeder tray and copy it.
•  If the top end position of the copy image from the document feeder is
different from that of the copy image from the document glass, exe-
cute simulation 50-06 to carry out adjustment referring to the service
manual.
Display

Sharp AR-SP6 (serv.man2) Service Manual ▷ Download

  • DOWNLOAD Sharp AR-SP6 (serv.man2) Service Manual ↓ Size: 126.68 KB | Pages: 3 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp AR-SP6 (serv.man2) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp AR-SP6 (serv.man2) Copying Equipment. Information contained in Sharp AR-SP6 (serv.man2) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.