Sharp AR-PN4 (serv.man2) Service Manual ▷ View online
CHAPTER 1 GENERAL DESCRIPTION
1-17
: Jan. 9 2004
1
C.
Removing Staple Jams
from the Finisher Unit
from the Finisher Unit
If the host machine indicates the finisher unit
staple jam message, perform the following to
remove the jam.
1)
remove the jam.
1)
Remove the stack waiting to be stapled from
the delivery tray.
the delivery tray.
Figure 1-316
2)
Open the front cover.
Figure 1-317
Figure 1-318
4)
When the staple cartridge has slightly slid
out, hold and pull it out.
out, hold and pull it out.
Figure 1-319
5)
Shift down the tab on the staple cartridge.
Figure 1-320
6)
Remove all staples that have slid out of the
staple case.
staple case.
Figure 1-321
3)
Shift down the green lever.
1
CHAPTER 1 GENERAL DESCRIPTION
1-18
7)
Return the tab on the staple cartridge to its
original position.
original position.
8)
Return the staple cartridge to its original
position, and close the front cover.
position, and close the front cover.
Figure 1-322
D.
Removing Paper Jams
from the Saddle Stitch
Unit (Saddle Finisher)
from the Saddle Stitch
Unit (Saddle Finisher)
If the host machine indicates the saddle stitch
unit paper jam message, perform the following to
remove the jam.
remove the jam.
1)
Holding the saddle stitch unit as shown,
move it to detach it from the host machine.
move it to detach it from the host machine.
Figure 1-323
2)
Open the front lower cover.
Figure 1-324
Reference
When the cover has been closed, the stapler unit
will automatically execute idle punching several
times to advance the staples.
will automatically execute idle punching several
times to advance the staples.
CHAPTER 1 GENERAL DESCRIPTION
1-19
3)
Turn the knob on the left side.
Figure 1-325
4)
Turn the knob on the right side while pushing
it in.
it in.
Figure 1-326
5)
Remove the jam.
Figure 1-327
6)
Open the inlet cover, and remove the jam.
Figure 1-328
7)
Close the front lower cover.
Figure 1-329
8)
Connect the finisher unit.
9)
Operate as instructed on the display.
CHAPTER 1 GENERAL DESCRIPTION
1-20
E.
Supplying the Saddle
Stitch Unit with Staples
(Saddle Finisher)
Stitch Unit with Staples
(Saddle Finisher)
If the host machine indicates the saddle stitch
unit staple supply message, perform the following
to supply it with staples.
to supply it with staples.
1)
Open the front lower cover.
Figure 1-330
2)
Slide out the stitch unit.
Figure 1-331
3)
Pull the stitch unit to the front once, and then
shift it up.
shift it up.
Figure 1-332
4)
Hold the empty cartridge on its sides, and
remove it.
remove it.
Figure 1-333
5)
Set a new cartridge.
Figure 1-334
Reference
You must always replace both cartridges at the
same time.
same time.
Click on the first or last page to see other AR-PN4 (serv.man2) service manuals if exist.