Sharp AR-PK2-PK3 (serv.man7) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., NIS Systems Support
Nis Bulletin 068
Page: 1 of 5
AR-P15 (AR-PK3) System Software Installation
Procedure
Model Name: AR-P15, AR-PK3
Overview:
Overview:
This bulletin explains how to install or re-install the system software for the AR-P15
Print Controller.
Print Controller.
Requirements:
1.
A PC running either Windows 95, 98, ME, NT, 2000 or XP operating
system (Windows 98 or ME Recommended).
system (Windows 98 or ME Recommended).
2.
CD-Rom drive.
3.
At least 400MB of free disk space.
4.
Support for ECP mode on the parallel port.
5.
IEEE 1284 Centronics cable.
6.
Fiery “Printer” Download Utility.
7.
System Software File(s)
Note: The PC will need to be configured so that the parallel port in the BIOS is set
to ECP. If ECP is not supported, the system software installation will be
much slower.
much slower.
Reminders:
Installing the system software erases all data, including the HDD (AR-PK3 only).
Check the following items before re-installing/updating:-
Configuration: Print a current set-up configuration page as all set-up parameters will
be deleted.
Archive:
Archive important print jobs from the print, hold and spool queues to
a local hard drive, including FreeForm masters (AR-PK3 only).
a local hard drive, including FreeForm masters (AR-PK3 only).
Job Log:
The list of jobs in the job log will be deleted. Save the current list of
jobs from the job log using Fiery Web spooler or by exporting the
information into a spreadsheet.(AR-PK3 only).
jobs from the job log using Fiery Web spooler or by exporting the
information into a spreadsheet.(AR-PK3 only).
Fonts:
All fonts that the customer has installed will be deleted. Print a
current Font List to determine which additional fonts have been
downloaded (AR-PK3 only).
current Font List to determine which additional fonts have been
downloaded (AR-PK3 only).
Webscan:
(AR-PK3 only).
E-Mail:
Extract both User and Print address books from the Fiery E-Mail
service (AR-PK3 only).
service (AR-PK3 only).
(Refer to the AR-P15 Fiery Utility & Scan/E-Mail Guides for further information).
Date:
28
TH
October 2002
Model: ARPK3
Ref:
Ref:
001
Colour Code: White
Page:
Page:
1 of 5
DOCUMENT SYSTEMS
SUPPORT BULLETIN
Sharp Electronics (UK) Ltd., NIS Systems Support
Nis Bulletin 068
Page: 2 of 5
System Software Installation Procedure:
1.
With the Windows PC and the AR651/810 both powered off, connect a short
IEEE1284 cable between the parallel port of the PC and to the AR-P15 Print
controller.
2.
Verify that the Parallel Port Mode is set to ECP mode by opening the PC Bios
or by checking the LPT1 setting from within a print driver (example shown).
or by checking the LPT1 setting from within a print driver (example shown).
3.
Insert and browse the System Software CD. Copy the ARP15 Download Tool
folder onto your local drive.
folder onto your local drive.
Sharp Electronics (UK) Ltd., NIS Systems Support
Nis Bulletin 068
Page: 3 of 5
4.
Open the ARP15 Download Tool folder.
Note:
When using Windows NT, 2000 or XP only, copy the “Porttalk.sys” driver file
into the “C:\winnt\system32” folder.
When using Windows NT, 2000 or XP only, copy the “Porttalk.sys” driver file
into the “C:\winnt\system32” folder.
5.
Launch the Printer download application (ensure the Print Spool on the local
PC is clear of any Print jobs before opening the application).
PC is clear of any Print jobs before opening the application).
6.
Browse the System Software CD for the required system software file (*.dle)
to download.
to download.
Sharp Electronics (UK) Ltd., NIS Systems Support
Nis Bulletin 068
Page: 4 of 5
There are 2 versions of system software, depending on the installed print
controller and option:-
controller and option:-
AR-P15 (Standard)
“Disk Less” version (approx. 18MB)
AR-PK3 (HDD, Scan & E-Mail)
“Disk” version (approx. 331MB)
Note:
Before downloading the AR-P15 “Diskless” system software, ensure that the
AR-PK2 Postscript upgrade (IC Location U8-00 on the Printer Board) is
removed.
Before downloading the AR-P15 “Diskless” system software, ensure that the
AR-PK2 Postscript upgrade (IC Location U8-00 on the Printer Board) is
removed.
ALWAYS ENSURE THE CORRECT SYSTEM SOFTWARE FILE
(CORRESPONDING TO THE INSTALLED PRINT CONTROLLER AND
OPTION) IS DOWNLOADED.
(CORRESPONDING TO THE INSTALLED PRINT CONTROLLER AND
OPTION) IS DOWNLOADED.
7.
Click Start
8.
When the above message appears, switch on the AR651 / 810 printer and
click on OK within 3 seconds, to commence downloading.
click on OK within 3 seconds, to commence downloading.
Display