DOWNLOAD Sharp AR-PE1 (serv.man36) Service Manual ↓ Size: 74.22 KB | Pages: 3 in PDF or view online for FREE

Model
AR-PE1 (serv.man36)
Pages
3 Few pages! See other manuals at the bottom of the first or last page.
Size
74.22 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / ARPE1-006 Release of the ARPE1 System Software v1.10
File
ar-pe1-sm36.pdf
Date
PREV: Sharp AR-PE1 (serv.man35) Service Manual / Technical Bulletin

Sharp AR-PE1 (serv.man36) Service Manual / Technical Bulletin ▷ View online

Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 029.doc
Page:  3 of 3
 
Action Performed by the ARPE1 Fiery Controller during a v1.10 System Software Installation
Start Time For each
Action
(Minutes)
Action Being Performed
ARPE1 LCD Panel Display
Connected Monitor Display
(Can be viewed if the optional FACI kit has been installed in the ARPE1).
Insert the System Software CD in to the ARPE1 and re-boot the
ARPE1.
Select Yes and click the button next to OK.
All data will be deleted. Continue ? Yes/No
Starting MS-DOS
0
A Ghost Image is copied from the CD to the ARPE1 hard disk.
Installing
Ghost software displays that a ghost image is being loaded on to the ARPE1
3
Insert CD 2 and power off/on the ARPE1.
To complete the install,  Insert CD2 and recycle the power.
A:\
4
Interrupts / hardware / and memory are tested at re-boot
Interrupts / hardware / and memory are being tested
Starting MS-DOS
The software on CD2 is about to be installed.
Server software will be installed. Yes/No
Starting MS-DOS
6
The files are copied to the ARPE1 hard disc.
Copying Files
Starting MS-DOS
8
Remove CD2 and recycle the ARPE1
To complete the install,  remove the CD & recycle power
C:\
9
Interrupts / hardware / and memory are tested at re-boot and then the
Loading
Standard NT Load up screens
(NTDetect, OSLoader, Blue boot up screen)
The ARPE1 automatically reboots itself.
11
Interrupts / hardware / and memory are tested at re-boot and then the
Loading
Standard NT Load up screens
(NTDetect, OSLoader, Blue boot up screen)
The ARPE1 automatically reboots itself.
13
Interrupts / hardware / and memory are tested at re-boot.
Loading
Standard NT Load up screens
(NTDetect, OSLoader, Blue boot up screen)
Initialising System
The software installation can be monitored.
20
A Backup Ghost Image is now copied from the hard drive to a separate
partition on the ARPE1 hard disc.
Creating System Backup
Ghost software displays that the backup image is being loaded on to the ARPE1
hard disc. (The ghost image software runs twice).
28
The ARPE1 automatically reboots itself.
Interrupts / hardware / and memory are tested at re-boot.
Standard NT Load up screens
(NTDetect, OSLoader, Blue boot up screen)
X4 Background is displayed and CTRL-ALT-Delete for logon.
Loading
29
Updating System
Service Control Manager highlights that a service has failed to load.
32
an idle ready condition.
Idle
Fiery X4 Background Picture
Total Installation time  -  Approx  32  minutes.
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 029.doc
Page:  3 of 3
 
Action Performed by the ARPE1 Fiery Controller during a v1.10 System Software Installation
Start Time For each
Action
(Minutes)
Action Being Performed
ARPE1 LCD Panel Display
Connected Monitor Display
(Can be viewed if the optional FACI kit has been installed in the ARPE1).
Insert the System Software CD in to the ARPE1 and re-boot the
ARPE1.
Select Yes and click the button next to OK.
All data will be deleted. Continue ? Yes/No
Starting MS-DOS
0
A Ghost Image is copied from the CD to the ARPE1 hard disk.
Installing
Ghost software displays that a ghost image is being loaded on to the ARPE1
3
Insert CD 2 and power off/on the ARPE1.
To complete the install,  Insert CD2 and recycle the power.
A:\
4
Interrupts / hardware / and memory are tested at re-boot
Interrupts / hardware / and memory are being tested
Starting MS-DOS
The software on CD2 is about to be installed.
Server software will be installed. Yes/No
Starting MS-DOS
6
The files are copied to the ARPE1 hard disc.
Copying Files
Starting MS-DOS
8
Remove CD2 and recycle the ARPE1
To complete the install,  remove the CD & recycle power
C:\
9
Interrupts / hardware / and memory are tested at re-boot and then the
Loading
Standard NT Load up screens
(NTDetect, OSLoader, Blue boot up screen)
The ARPE1 automatically reboots itself.
11
Interrupts / hardware / and memory are tested at re-boot and then the
Loading
Standard NT Load up screens
(NTDetect, OSLoader, Blue boot up screen)
The ARPE1 automatically reboots itself.
13
Interrupts / hardware / and memory are tested at re-boot.
Loading
Standard NT Load up screens
(NTDetect, OSLoader, Blue boot up screen)
Initialising System
The software installation can be monitored.
20
A Backup Ghost Image is now copied from the hard drive to a separate
partition on the ARPE1 hard disc.
Creating System Backup
Ghost software displays that the backup image is being loaded on to the ARPE1
hard disc. (The ghost image software runs twice).
28
The ARPE1 automatically reboots itself.
Interrupts / hardware / and memory are tested at re-boot.
Standard NT Load up screens
(NTDetect, OSLoader, Blue boot up screen)
X4 Background is displayed and CTRL-ALT-Delete for logon.
Loading
29
Updating System
Service Control Manager highlights that a service has failed to load.
32
an idle ready condition.
Idle
Fiery X4 Background Picture
Total Installation time  -  Approx  32  minutes.
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 029.doc
Page:  3 of 3
 
Action Performed by the ARPE1 Fiery Controller during a v1.10 System Software Installation
Start Time For each
Action
(Minutes)
Action Being Performed
ARPE1 LCD Panel Display
Connected Monitor Display
(Can be viewed if the optional FACI kit has been installed in the ARPE1).
Insert the System Software CD in to the ARPE1 and re-boot the
ARPE1.
Select Yes and click the button next to OK.
All data will be deleted. Continue ? Yes/No
Starting MS-DOS
0
A Ghost Image is copied from the CD to the ARPE1 hard disk.
Installing
Ghost software displays that a ghost image is being loaded on to the ARPE1
3
Insert CD 2 and power off/on the ARPE1.
To complete the install,  Insert CD2 and recycle the power.
A:\
4
Interrupts / hardware / and memory are tested at re-boot
Interrupts / hardware / and memory are being tested
Starting MS-DOS
The software on CD2 is about to be installed.
Server software will be installed. Yes/No
Starting MS-DOS
6
The files are copied to the ARPE1 hard disc.
Copying Files
Starting MS-DOS
8
Remove CD2 and recycle the ARPE1
To complete the install,  remove the CD & recycle power
C:\
9
Interrupts / hardware / and memory are tested at re-boot and then the
Loading
Standard NT Load up screens
(NTDetect, OSLoader, Blue boot up screen)
The ARPE1 automatically reboots itself.
11
Interrupts / hardware / and memory are tested at re-boot and then the
Loading
Standard NT Load up screens
(NTDetect, OSLoader, Blue boot up screen)
The ARPE1 automatically reboots itself.
13
Interrupts / hardware / and memory are tested at re-boot.
Loading
Standard NT Load up screens
(NTDetect, OSLoader, Blue boot up screen)
Initialising System
The software installation can be monitored.
20
A Backup Ghost Image is now copied from the hard drive to a separate
partition on the ARPE1 hard disc.
Creating System Backup
Ghost software displays that the backup image is being loaded on to the ARPE1
hard disc. (The ghost image software runs twice).
28
The ARPE1 automatically reboots itself.
Interrupts / hardware / and memory are tested at re-boot.
Standard NT Load up screens
(NTDetect, OSLoader, Blue boot up screen)
X4 Background is displayed and CTRL-ALT-Delete for logon.
Loading
29
Updating System
Service Control Manager highlights that a service has failed to load.
32
an idle ready condition.
Idle
Fiery X4 Background Picture
Total Installation time  -  Approx  32  minutes.
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 029.doc
Page:  3 of 3
 
Action Performed by the ARPE1 Fiery Controller during a v1.10 System Software Installation
Start Time For each
Action
(Minutes)
Action Being Performed
ARPE1 LCD Panel Display
Connected Monitor Display
(Can be viewed if the optional FACI kit has been installed in the ARPE1).
Insert the System Software CD in to the ARPE1 and re-boot the
ARPE1.
Select Yes and click the button next to OK.
All data will be deleted. Continue ? Yes/No
Starting MS-DOS
0
A Ghost Image is copied from the CD to the ARPE1 hard disk.
Installing
Ghost software displays that a ghost image is being loaded on to the ARPE1
3
Insert CD 2 and power off/on the ARPE1.
To complete the install,  Insert CD2 and recycle the power.
A:\
4
Interrupts / hardware / and memory are tested at re-boot
Interrupts / hardware / and memory are being tested
Starting MS-DOS
The software on CD2 is about to be installed.
Server software will be installed. Yes/No
Starting MS-DOS
6
The files are copied to the ARPE1 hard disc.
Copying Files
Starting MS-DOS
8
Remove CD2 and recycle the ARPE1
To complete the install,  remove the CD & recycle power
C:\
9
Interrupts / hardware / and memory are tested at re-boot and then the
Loading
Standard NT Load up screens
(NTDetect, OSLoader, Blue boot up screen)
The ARPE1 automatically reboots itself.
11
Interrupts / hardware / and memory are tested at re-boot and then the
Loading
Standard NT Load up screens
(NTDetect, OSLoader, Blue boot up screen)
The ARPE1 automatically reboots itself.
13
Interrupts / hardware / and memory are tested at re-boot.
Loading
Standard NT Load up screens
(NTDetect, OSLoader, Blue boot up screen)
Initialising System
The software installation can be monitored.
20
A Backup Ghost Image is now copied from the hard drive to a separate
partition on the ARPE1 hard disc.
Creating System Backup
Ghost software displays that the backup image is being loaded on to the ARPE1
hard disc. (The ghost image software runs twice).
28
The ARPE1 automatically reboots itself.
Interrupts / hardware / and memory are tested at re-boot.
Standard NT Load up screens
(NTDetect, OSLoader, Blue boot up screen)
X4 Background is displayed and CTRL-ALT-Delete for logon.
Loading
29
Updating System
Service Control Manager highlights that a service has failed to load.
32
an idle ready condition.
Idle
Fiery X4 Background Picture
Total Installation time  -  Approx  32  minutes.
Display

Sharp AR-PE1 (serv.man36) Service Manual / Technical Bulletin ▷ Download

  • DOWNLOAD Sharp AR-PE1 (serv.man36) Service Manual ↓ Size: 74.22 KB | Pages: 3 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Technical Bulletin for the Sharp AR-PE1 (serv.man36) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp AR-PE1 (serv.man36) Copying Equipment. Information contained in Sharp AR-PE1 (serv.man36) Service Manual / Technical Bulletin (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.

Found More:

AR-PE1 (serv.man36) Service Manuals

Preview DownloadPagesSize
AR-PE1 (serv.man8) AR-PX1 Interface Service Manual (includes Parts Guide). Service Manual 18 1.11 MB
AR-PE1 (serv.man9) AR-PE1 EFI Service Manual. Service Manual 124 1.93 MB
AR-PE1 (serv.man11) ARPE1 Colour Manual User Manual / Operation Manual 127 1.67 MB
AR-PE1 (serv.man12) ARPE1 Configuration Manual User Manual / Operation Manual 127 2.1 MB
AR-PE1 (serv.man13) ARPE1 Getting Started Manual User Manual / Operation Manual 116 1.16 MB
AR-PE1 (serv.man14) ARPE1 Job Management Manual User Manual / Operation Manual 127 2.56 MB
AR-PE1 (serv.man15) ARPE1 Printing Manual User Manual / Operation Manual 112 1.31 MB
AR-PE1 (serv.man43) ARC250 ARPE1 Windows 2000 Print Driver (v1.50). Windows 2000 Drivers 2.42 MB
AR-PE1 (serv.man2) Adobe Print Driver v8.8 For Mac. Mac OS Drivers 1.72 MB
AR-PE1 (serv.man44) ARC150 ARPE1 Windows 2000 Print Driver (v1.50). Windows 2000 Drivers 2.42 MB
AR-PE1 (serv.man45) ARC250 ARPE1 Windows 2000 Print Driver (Original). Windows 2000 Drivers 29.09 KB
AR-PE1 (serv.man46) ARC150 ARPE1 Windows 2000 Print Driver (Original). Windows 2000 Drivers 29.28 KB
AR-PE1 (serv.man47) ARC250 ARPE1 Windows XP Print Driver (v1.50). Windows XP Drivers 2.44 MB
AR-PE1 (serv.man48) ARC150 ARPE1 Windows XP Print Driver (v1.50). Windows XP Drivers 2.42 MB
AR-PE1 (serv.man49) ARC250 ARPE1 Windows NT4 Print Driver. Windows NT4 Drivers 616.55 KB
AR-PE1 (serv.man50) ARC150 ARPE1 Windows NT4 Print Driver. Windows NT4 Drivers 616.12 KB
AR-PE1 (serv.man51) ARC250 ARPE1 Windows 95 98 ME Print Driver. Windows 98 Drivers 3.76 MB
AR-PE1 (serv.man52) ARC150 ARPE1 Windows 95 98 ME Print Driver. Windows 98 Drivers 3.82 MB
AR-PE1 (serv.man53) Modified PPD's for Mac OS X (v10.2.2). Mac OS Drivers 49.04 KB
AR-PE1 (serv.man54) Adobe Print Driver v8.8 For Mac. Mac OS Drivers 1.72 MB
AR-PE1 (serv.man55) AR-C250 Apple Mac PPD. Mac OS Drivers 12.55 KB
AR-PE1 (serv.man56) AR-C150 Apple Mac PPD. Mac OS Drivers 12.32 KB
AR-PE1 (serv.man57) ARC150 ARPE1 Apple Mac Printer Driver. Mac OS Drivers 1.1 MB
AR-PE1 Modified PPD's for Mac OS X (v10.2.2). Mac OS Drivers 49.04 KB
AR-PE1 (serv.man3) AR-C250 Apple Mac PPD. Mac OS Drivers 12.54 KB
AR-PE1 (serv.man4) AR-C150 Apple Mac PPD. Mac OS Drivers 12.32 KB
AR-PE1 (serv.man5) ARC150 ARPE1 Apple Mac Printer Driver. Mac OS Drivers 1.1 MB
AR-PE1 (serv.man10) AR-PE1 Parts Guide (Updated). Service Manual / Parts Guide 3 649.89 KB
AR-PE1 (serv.man6) ARPE1 PE2 Specification Comparison. Service Manual / Specification 2 2.83 MB
AR-PE1 (serv.man7) ARPE1 specification sheet Service Manual / Specification 2 120.29 KB
AR-PE1 (serv.man41) ARPE1-002 Setting up the ARPE1 Fiery Controller on a Windows NT4 Network Service Manual / Technical Bulletin 16 357.35 KB
AR-PE1 (serv.man42) ARPE1-001 Setting up the ARPE1 Fiery Controller on a Windows 9x Peer-Peer Network Service Manual / Technical Bulletin 14 489.65 KB
AR-PE1 (serv.man40) ARPE1-003 Setting up the ARPE1 Fiery Controller on a Windows 2000 Network Service Manual / Technical Bulletin 18 396.8 KB
AR-PE1 (serv.man39) ARPE1-004 ARPE1 System Software Installation System Software Patch Service Manual / Technical Bulletin 4 87.4 KB
AR-PE1 (serv.man38) ARPE1-005 Setting up the ARPE1 Fiery Controller on a Novell NetWare 4.xx 5.xx IPX NDS Network Service Manual / Technical Bulletin 16 403.2 KB
AR-PE1 (serv.man35) Incorrect copier counting when printing in Black White from Quark Express 4.0 on an Apple Macintosh computer Service Manual / Technical Bulletin 3 103.2 KB
AR-PE1 (serv.man34) ARPE1-008 Connecting an ARPE1 on to an ARC250 Service Manual / Technical Bulletin 3 69.47 KB
AR-PE1 (serv.man33) ARPE1-009 New ARPE1 System Software Patch 1-1SAFH Service Manual / Technical Bulletin 2 35.25 KB
AR-PE1 (serv.man37) ARPE1-005 Setting up the ARPE1 Fiery Controller on a Novell NetWare 4.xx 5.xx IPX NDS Network Service Manual / Technical Bulletin 16 403.2 KB
AR-PE1 (serv.man32) ARPE1-010 Installation on Netware 5 NDPS using TCP IP. Service Manual / Technical Bulletin 16 432.28 KB
AR-PE1 (serv.man29) ARPE1-013 MSBlast Virus Protection (Revised). Service Manual / Technical Bulletin 3 83.08 KB
AR-PE1 (serv.man30) ARPE1-012 Installation of a Fiery Print Controller under Apple Mac OSX. Service Manual / Technical Bulletin 6 283.76 KB
AR-PE1 (serv.man31) ARPE1-011 Configuring Print Colour Accounting Service Manual / Technical Bulletin 2 20.57 KB
AR-PE1 (serv.man25) AR-PE1 System Software Patch 1-1MP74 for AR-C150. Driver / Update 76.42 KB
AR-PE1 (serv.man26) AR-PE1 System Software Patch 1-1MP71 for AR-C250. Driver / Update 76.42 KB
AR-PE1 (serv.man27) ARPE1 System Software Patch 1-1SAFH Driver / Update 105.67 KB
AR-PE1 (serv.man28) ARC250 ARPE1 ICM Profile Driver / Update 204.22 KB
AR-PE1 (serv.man20) Command Workstation LE v4.2 for Mac OSX Driver / Update 7.31 MB
AR-PE1 (serv.man21) Adobe Universal Postscript Windows Driver. AdobePS 4.5.3 (Win95 98 ME) AdobePS 5.2.2 (Win NT4) PScript 5 (Win 2000 XP) Driver / Update 7.2 MB
AR-PE1 (serv.man22) AR-PE1 System Software Patch 1-1J1VI for AR-C250 Driver / Update 4.47 MB
AR-PE1 (serv.man23) AR-PE1 System Software Patch 1-1J1VF for AR-C150 Driver / Update 4.47 MB
AR-PE1 (serv.man24) AR-PE1 System Software Patch 1-1LJG9 Driver / Update 241.11 KB
AR-PE1 (serv.man17) ARPE1 Frequently Asked Questions Guide (Updated 01 03 2001) FAQ 14 197.68 KB
AR-PE1 (serv.man16) System Software Revision Table (May'03) FAQ 1 6.62 KB
AR-PE1 (serv.man18) ARC150 Copier Firmware Upgrade Procedure FAQ 7 159.43 KB
AR-PE1 (serv.man19) ARPE1 Windows 95 98 Printer Driver Overview FAQ 11 591.82 KB

RANDOM: