DOWNLOAD Sharp AR-PB9 (serv.man4) Service Manual ↓ Size: 247.09 KB | Pages: 36 in PDF or view online for FREE

P a g e

● 

● 

● 

● 

● 

♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠

♠

♠♠♠♠♠♠♠♠♠♠

♠

♠

♠

♠

♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠

♠

♠

♠

♠♠♠♠♠♠♠♠♠♠

♠

♠♠♠♠♠♠♠♠♠♠♠♠♠

♠♠

♠♠

♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠

♠♠

♠♠♠♠♠♠♠♠♠♠♠

♠♠

♠

♠♠♠♠♠♠♠♠♠♠

♠

♠

♠

♠

♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠

♠

♠

♠

♠♠♠♠♠♠♠♠♠♠

♠

♠♠

This device complies with Part 15 of the FCC rules. Operation is subject to the 
following two conditions: (1) This device may not cause harmful interference, 
and (2) this device must accept any interference received, including interference 
that may cause undesired operation.

FCC Regulations state that any unauthorized changes or modifications to this 
equipment not expressly approved by the manufacturer could void the user’s 
authority to operate this equipment.

Note:
This equipment has been tested and found to comply with the limits for a Class 
B digital device, pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the interference by one or more of 
the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which 
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Shielded cables must be used with this equipment to maintain compliance with 
FCC regulations.

●

●

●

●

“For use

AR-150

AR-155”

This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 
93/68/EEC.

Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und 73/23/EWG mit Änderung 
93/68/EWG.

Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et 73/23/CEE modefiées par la 
directive 93/68/CEE.

Dit apparaat voldoet aan de eisen van de richtlijnen 89/336/EEG en 73/23/EEG, gewijzigd door 93/68/EEG.

Dette udstyr overholder kravene i direktiv nr. 89/336/EEC og 73/23/EEC med tillæg nr. 93/68/EEC.

Quest’ apparecchio è conforme ai requisiti delle direttive 89/336/EEC e 73/23/EEC, come emendata dalla 
direttiva 93/68/EEC.

Este equipamento obedece às exigências das directivas 89/336/CEE e 73/23/CEE, na sua versão corrigida 
pela directiva 93/68/CEE.

Este aparato satisface las exigencias de las Directivas 89/336/CEE y 73/23/CEE, modificadas por medio de 
la 93/68/CEE.

Denna utrustning uppfyller kraven enligt riktlinjerna 89/336/EEC och 73/23/EEC så som kompletteras av 
93/68/EEC.

Dette produktet oppfyller betingelsene i direktivene 89/336/EEC og 73/23/EEC i endringen 93/68/EEC.

Tämä laite täyttää direktiivien 89/336/EEC ja 73/23/EEC vaatimukset, joita on muutettu direktiivillä 
93/68/EEC.

INTRODUCTION     2

MAIN FEATURES     3

MAKING FLOPPY DISKS FROM CD-ROM     3

CONNECTING THE INTERFACE CABLE     4

INSTALLING THE PRINTER DRIVER SOFTWARE     6

– Description of the printer driver     6

– Checking the hardware and software requirements     6

– Installing the printer driver     6

– AR-150 Series PCL printer driver group     12

PRINTING A PAGE     13

– Executing printing

– Indicators and key on the operation panel     14

SETTING PRINT CONDITIONS FROM PRINTER DRIVER     15

2-SIDED PRINTING (AR-155 only)   17

TEST PRINTING   18

TROUBLESHOOTING     19

– Printing problems     19

STATUS MONITOR     21

UNINSTALLING PRINTER DRIVER     23

SPECIFICATIONS      24

ADDITIONAL MEMORY      24

PARALLEL INTERFACE     25

USB INTERFACE    26

INSTALLED FONT LIST     27

1

Getting started

This chapter provides basic information for using the SHARP AR-150 series printer and its
features.

The AR-150 series machines can be used as a copier and a laser  printer. This manual describes
only the printer features of the machine. To use an AR-150 series machine as a copier and to
learn additional information which relates to both the copier and printer features, see the copier
manual. To get full use of all printer features, familiarize yourself with this manual.
For quick reference during printer use, keep this manual in a handy location.

In this manual, the following icons are used to provide the user with information pertinent to the
use of the machine.

Cautions the user that damage to the machine or one of its components may
result if the contents of the caution are not properly followed.

Notes provide information relevant to the machine regarding specifications,
functions, performance, operation and such, that may be useful to the user.

●

When you try to execute printing while copying is being performed, printing
will be executed after copying is finished.

●

When you try to make a copy while printing is being performed, printing will
be interrupted and you can make a copy. Printing will be resumed after copying
is finished.

Windows, MS-DOS and Windows NT are trademarks of Microsoft Corporation in the U.S.A.
and other countries.
IBM, PC/AT and OS/2 are trademarks of International Business Machines Corporation.
PCL is a trademark of Hewlett-Packard Company.
All other trademarks and copyrights are the property of their respective owners.

1