DOWNLOAD Sharp AR-PB2 (serv.man5) Service Manual ↓ Size: 27.28 KB | Pages: 1 in PDF or view online for FREE

Model
AR-PB2 (serv.man5)
Pages
1 Few pages! See other manuals at the bottom of the first or last page.
Size
27.28 KB
Type
PDF
Document
Service Manual / Parts Guide
Brand
Device
Copying Equipment / ARPB2-Parts Guide
File
ar-pb2-sm5.pdf
Date

Sharp AR-PB2 (serv.man5) Service Manual / Parts Guide ▷ View online

[3] SETUP
1. Parts list
Before installing the printer kit, check that all the following items are prepared.
Be careful that the necessary parts depend on the environment of the copier (model and unit installation). 
Part name
Model
Q’ty
Note
Accessories
SCSI cable
1
Wire saddle
1
Band
1
Printer box installing screw
5
Printer control PWB
1
With frame
Printer driver
Windows 95 PCL5E Driver (FD)
1
Windows NT PCL5E Driver (FD)
1
Windows 95 PS Driver (FD)
1
Windows NT PS Driver (FD)
1
Installation manual
1
Operation Manual
1
Label
1
Only for Sweden and Norway
Option
Expansion board
AR-EB1
1
The expansion board is necessary to install
the printer kit to the AR-S280.
SIMM memory
16MB
ED0 type/Without parity/70ns or above
The copier ICU PWB requires the total
memory of 16MB(20MB) or more.
The printer control PWB has two expansion
slots to which 16MB or 32MB memory can
be additionally installed. (16MB onboard)
32MB
Network card
AR-NC1D
1
10BASE T/10BASE 2
Separate purchase
(User purchase)
Printer (parallel) cable
Necessary when the copier is used as a
stand-alone machine.
2. Preliminary work
If the version of the three kinds of flash memory installed to the copier
is older than the following, upgrade is required. 
Check version number, and perform the upgrade if necessary. (For
the procedure, refer to the Technical Report.)
Flash memory version
Operation PWB
2.xx
ICU PWB
2.xx
PCU PWB 
2.xx
3. Hardware setup
A. Common work
(1) Printer unit installation
1) Turn "OFF" the main switch located on the left-hand side on the
main copier unit.
Next, unplug the power plug of the main copier unit from the
outlet.
2) Removing the rear cover of the main copier unit.
If equipped with the RADF/ADF/SPF, loosen the securing screws
which the hold the RADF/ADF/SPF connector and remove the
connector from the main copier unit.
Remove the five securing screws which hold the rear cover of
main copier unit, and remove the rear cover.
Next, loosen the upper central one of four securing screws which
hold the rear lower cover, then remove the rest three screws.
Remove the rear lower cover.
"OFF"
 Main switch
Screw
Connector
Rear cover
Rear lower cover
Securing
screw
 Securing screws
Loosen
AR-PB2
3 – 1
Display

Sharp AR-PB2 (serv.man5) Service Manual / Parts Guide ▷ Download

  • DOWNLOAD Sharp AR-PB2 (serv.man5) Service Manual ↓ Size: 27.28 KB | Pages: 1 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Parts Guide for the Sharp AR-PB2 (serv.man5) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp AR-PB2 (serv.man5) Copying Equipment. Information contained in Sharp AR-PB2 (serv.man5) Service Manual / Parts Guide (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.