Sharp AR-PA1 (serv.man2) Service Manual ▷ View online
CODE: 00ZARPA1//A1E
DIGITAL COPIER
OPTION
LCD PANEL KIT
OPTION
LCD PANEL KIT
MODEL
AR-PA1
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with specified ones
for maintaining the safety and performance of the set.
for maintaining the safety and performance of the set.
[ 1 ] PRODUCT OUTLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
[ 2 ] SYSTEM DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
[ 3 ] SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
[ 4 ] UNPACKING AND INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . 1-1
CONTENTS
AR-PA1
SHARP CORPORATION
Digital copier
LCD panel kit
(AR-PA1)
(AR-PA1)
LCD unit
Mother board
PWB attachment frame
etc.
Printer kit
(PCL)
(PCL)
FAX kit
Options
[1] PRODUCT OUTLINE
This machine is installed to the digital copier which has no functions of FAX and printer, and is used to display the status. It is nor required for
models which have functions of FAX and printer.
models which have functions of FAX and printer.
[2] SYSTEM DIAGRAM
[3] SPECIFICATIONS
LCD digits
20 digits
×
2
Display of status/parameter of printer/FAX*
LED display
Data
ON when data supplied.
Common to printer/FAX
On-line
ON in on-line
OFF in off-line
Keys
Line
Changes between the on-line and off-line modes.
When the printer is on-line, it can receive data from the computer with which it is connected.
When the printer is off-line, you can use operation panel keys to make print settings.
Note, however, that you cannot make settings if the "Data Remaining" message is displayed.
When the printer is on-line, it can receive data from the computer with which it is connected.
When the printer is off-line, you can use operation panel keys to make print settings.
Note, however, that you cannot make settings if the "Data Remaining" message is displayed.
Menu
Used to show setting menus on the display in sequence.
∗
← →
Used to change the value of any item.
∗
Enter
Used to enter a new value.
Item
Used to show the setting items of the selected menu in sequence.
∗
*
For details, refer to the printer kit/FAX kit Service Manual.
[4] UNPACKING AND INSTALLATION
1. Procedures on the copier (operation panel)
A. Copier operation panel disassembly
•
Remove three screws and one connector, and remove the
operation panel.
operation panel.
B. Cover disassembly
•
Remove one screw and disengage two pawls, and remove the
cover.
cover.
AR-PA1
1 – 1
C. Printer operation panel installation
•
Engage two pawls and fix the printer operation panel with one
screw.
Then connect the flat cable to the connector.
screw.
Then connect the flat cable to the connector.
2. Procedures on the copier (rear side)
A. Copier rear cabinet disassembly
•
Remove seven screws and remove the rear cabinet.
B. Copier shield plate disassembly
•
Remove six screws, and remove the shield plate.
C. PWB fixing plate installation
•
Fix the plate with four screws.
D. Printer PWB or Fax PWB installation
•
Refer to the Rach service manual.
E. Mother board installation
•
Insert the connectors and fix them, then connect the connec-
tors of the copier to them.
tors of the copier to them.
F. Shield plate installation
•
Fix the shield plate with six screws.
G. PWB cover installation
•
Install the PWB cover with 14 screws.
AR-PA1
1 – 2
Printed in Japan.
SHARP CORPORATION
Printing & Reprographic Systems Group
Quality & Reliability Control Center
Yamatokoriyama, Nara 639-1186, Japan
Printing & Reprographic Systems Group
Quality & Reliability Control Center
Yamatokoriyama, Nara 639-1186, Japan
1999 February Printed in Japan
N
AR-PA1
Display