Sharp AR-P19 (serv.man7) FAQ ▷ View online
REV. 1.00
29
Parameter
Argument
Meaning
LONGEDGE Top
binding
SHORTEDGE Left
binding
BINDING
RIGHTEDGE Right
binding
RET: Smoothing
HP machine has five parameters, OFF, LIGHT, MEDIUM, DARK, and ON.
Dragon has only two parameters.
Parameter
Argument
Meaning
OFF
Smoothing is not executed.
RET
ON Smoothing
is
executed.
PJL Command of which Use Method was Changed from prior Sharp
Products
Products
COPIES: Copies Setting
When printing copies setting, “COPIES” of the PJL SET/DEFAULT
command is defined.
command is defined.
Parameter
Argument
Meaning
COPIES 1..999
Show
copies.
PJL Command Parameter for ESCP Control
The following PJL SET/DEFAULT commands are supported for ESCP
emulation.
CARRIAGERETURN: ESCP Control
This parameter of the PJL SET/DEFAULT command is used to control
ESC/P emulation.
REV. 1.00
30
Parameter
Setting
value
value
Meaning
CR
CARRIAGERETURN
CRLF
Controls how ESC/P interprets the
carriage return (CR) control character.
The valid values for
CARRIAGERETURN are: CR–CR maps
to carriage return; CRLF–CR maps to
carriage return and linefeed.
carriage return (CR) control character.
The valid values for
CARRIAGERETURN are: CR–CR maps
to carriage return; CRLF–CR maps to
carriage return and linefeed.
CR
is
default.
CHARACTERSET: ESCP Control
This parameter of the PJL SET/DEFAULT command is used to control
ESC/P emulation.
Parameter
Argument
Meaning
KANA
CHARACTERSET
EG
Default character set used for
1-byte printing. Valid values for
CHARACTERSET are: KANA–Use
katakana character set; EG–Use
extended graphics character set.
1-byte printing. Valid values for
CHARACTERSET are: KANA–Use
katakana character set; EG–Use
extended graphics character set.
KANA is default.
TOPMARGIN: ESCP Control
This parameter of the PJL SET/DEFAULT command is used to control
ESC/P emulation.
Parameter
Argument
Meaning
MM85
MM10
MM22
TOPMARGIN
MMAX
Default
is
MM85.
FONT: ESCP Control
This parameter of the PJL SET/DEFAULT command is used to control
ESC/P emulation.
REV. 1.00
31
Parameter
Argument
Meaning
MINCYOU
FONT
GOTHIC
Default font used when printing
in Kanji mode.
in Kanji mode.
Default
is
MINCYO.
PJL Command Parameter of PC-FAX Control
The following PJL SET/DEFAULT commands are supported for PC-FAX
emulation.
DRIVERHEADER
PJL SET Command Parameter
Parameter
Argument
ON
Turn on the Dragon’s sending source.
DRIVERHEADER
OFF
Turn off the Dragon’s sending source.
FAXIMAGESIZE: PC-FAX Control
PJL SET Command Parameter
Parameter
Argument
FAXIMAGESIZE
In the case of sending reservation,
number of bytes for image data is
shown in decimal system as
0…4,294,967,295.
number of bytes for image data is
shown in decimal system as
0…4,294,967,295.
REV. 1.00
32
FAXJOBID: PC-FAX Control
PJL SET Command Parameter
Parameter
Argument
FAXJOBID
Specify unique job ID from the PC-FAX
application.
application.
FAXMEMORYBOXCOUNT: PC-FAX Control
PJL SET Command Parameter
Parameter
Meaning
FAXMEMORYBOXCOUNT
Show the number at the broadcasting
in decimal system of 0…4,294,967,295.
in decimal system of 0…4,294,967,295.
MFPPASSWORD Control
PJL SET Command Parameter
Parameter
Meaning
MFPPASSWORD
Specify password character string with
user name that permitted PC-FAX
output.
user name that permitted PC-FAX
output.
Only the 32-digit hashed password
strings are valid as key.
strings are valid as key.
MFPUSERNAME: PC-FAX Control
PJL SET Command
Parameter
Meaning
MFPUSERNAME
Specify user name that permits the
PCFAX output. 64-digit or smaller
string.
PCFAX output. 64-digit or smaller
string.
Click on the first or last page to see other AR-P19 (serv.man7) service manuals if exist.