AR-NS2 (serv.man17). ARNS2-006 The AR-C260M Scanner Destination Tool (SCNSET) — Sharp Copying Equipment Technical Bulletin (repair manual)

Model
AR-NS2 (serv.man17)
Pages
3 Few pages! See other manuals at the bottom of the first or last page.
Size
140.83 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / ARNS2-006 The AR-C260M Scanner Destination Tool (SCNSET)
File
ar-ns2-sm17.pdf
Date

View Sharp AR-NS2 (serv.man17) Technical Bulletin online

Sharp Electronics (UK) Ltd., NIS Systems Support 
 
NIS Bulletin 082 
 
Page:  1 of 3 
 
 
 
 
 
 
 
SCNSET 
The AR-C260M Scanner Destination Tool 
 
 
Model Name: 
AR-C260M, AR-NS2 
 
 
Description:   
This tool allows the easy input of multiple scanner destinations to the 
ARC260M equipped with an ARNS2. Furthermore, it also allows Destinations 
to be saved to disk, and replicated to other machines if required. 
 
 Notes: 
 
1.  This Tool can only be used on AR-C260M and is not compatible with 
other AR-NS2 supported machines (eg Tiger). 
2.  EIU v4.3 is not compatible with AR-C260M. 
 
Overview:  
The ARC260M/ ARNS2 is capable of holding up to 600 email / ftp/ desk  
 
 
 
destinations (with a maximum of 100 FTP/Desk destinations). Although the 
web-browser interface allows the easy entry of single destinations, multiple 
entries can be time-consuming.  The ability to load destination data from a 
“.CSV” file is therefore very useful.  
 
Other uses of this tool include: 
 
•  When common destinations are required on multiple machines, this tool 
can easily replicate the scanner destinations on AR-C260M machines 
throughout the customer’s site 
 
•  A service engineer can back-up and restore scanner destinations to a 
machine, if a PWB holding the destinations needs to be serviced. 
 
How It Works:   
The tool operates from an MS-DOS command prompt (available from all MS 
Windows systems.) 
 
The tool simulates the action of the web browser’s destination input. Taking 
each line within the .CSV file, writing each destination into the machine will 
take approximately 7 seconds. If you require to write all 600 destinations, it 
will take 70 minutes (approx.).  

The tool creates a (results.csv) file, which allows you to check that all 
destinations have been stored correctly.  Any errors are listed in the first 
column, against the failed destination 
 
 
 
 
 
 
 
 
Cont’d 
 
 
Date:  
12
th
  September 2003
Model:  
ARNS2 
Ref: 006 
Colour Code:  White 
Page: 
 
1 of 3 
DOCUMENT SYSTEMS 
SUPPORT BULLETIN
 
Sharp Electronics (UK) Ltd., NIS Systems Support 
 
NIS Bulletin 082 
 
Page:  2 of 3 
 “Result.csv” 
example 
 
 
 
 
Caution: 
 
 
1. 
During the destination writing process, do not allow the machine [image send] button to be pressed. If 
the [image send] button is pressed, the utility cannot write destinations and it will record a failed attempt 
against the individual destination in the “results.csv” file. 
 
2. 
The utility cannot check if a destination is already stored in the machine, and a destination maybe 
duplicated. 
 
3. 
Desktop destinations created by the Network Scanner Tool do not have a “Custom Directory” entry when 
the copier profile is updated. Desktop destinations without this information will not be exported by using 
SCNSET. Amend the “Custom Directory” entry manually for each desktop destination before exporting. 
 
4. 
Be careful not to exceed the maximum capacity of destinations. When the maximum number of  
destinations is reached, the machine will write “Ignore Error 954” into the results log, and subsequent 
destinations will have the “Ignore-Email append count over” error message. 
 
 
 
Using SCNSET – The Scanner Destination Tool 
 
 
1. 
Download the file and unzip it into a folder (example c:\scantool). 
 
2. 
Check the “sample.csv” file to understand the format of a destination. 
 
3. 
Create your own .csv file containing the customer’s destinations and save it in the c:\scantool folder. 
 
4. 
Go to an MS-DOS command prompt. 
 
Change directory (folder) to c:\scantool   (cd c:\scantool) 
 
5. 
Then use the utility to write, read or delete destinations in ARC260M, using the following command 
switches. 
 
 
Note:  We recommend that you delete all destinations in the machine, before writing to the machine.   
This can be achieved by using SCNSET (refer to page 3) or by executing Sim 67:18. 
   
If Sim 67:18 is used, additional settings such as Email & DNS configurations are also deleted.    
    
 
 
 
 
 
 
 
 
Sharp Electronics (UK) Ltd., NIS Systems Support 
 
NIS Bulletin 082 
 
Page:  3 of 3 
 
 
  
[1] Read Data  (Saving Destinations from AR-C260M to Disk) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
           
Example: 
   C:\scantool>scnset 
-H10.36.132.22 
-Xtest 
     
 
 
 
 
 
 
 
              
Parameter: 
 
 
 
 
 
 
 
 
               
 
 
  -H    IP address of target machine                 
example: 10.36.132.22 
 
               
 
 
  -X    File name (An extension is unnecessary.)  example: test 
 
 
 
 
 
 
 
 
 
 
[2] Delete Data   (Deleting all destinations on the AR-C260M)  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
           
Example: 
 C:\scantool>scnset -H10.36.132.22 -D*  
 
 
 
 
              
Parameter: 
 
 
 
 
                 
 
 
-H    IP address of target machine                 
example: 10.36.132.22   
 
 
 
                 
 
 
-D*   Delete all data 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
[3] Write data   (Writing Destinations to the AR-C260M) 
 
 
 
 
 
 
 
 
           
Example 
C:\scantool>scnset -H10.36.132.22 -V+test 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
              
Parameter: 
 
 
 
 
 
 
 
 
 
                
 
 
-H    IP address of target machine                 
example: 10.36.132.22   
 
 
 
 
 
 
 
                 
 
 
-V+   File name (An extension is unnecessary.)   example: test   
 
 
 
 
 
 
 
Page of 3
Display

Download Sharp AR-NS2 (serv.man17) Technical Bulletin

Here you can view online or download Sharp AR-NS2 (serv.man17) Technical Bulletin in pdf. This Technical Bulletin can help you recover, restore, fix, disassemble and repair Sharp AR-NS2 (serv.man17) Copying Equipment. Information contained in Sharp AR-NS2 (serv.man17) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).