Sharp AR-NC3D (serv.man20) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 017.doc
Page: 5 of 15
6. Browse to the location of the ARPB2 PCL driver and click on OK.
7. Click on OK again.
8. The printer driver is then copied on to the Novell Broker. Click on OK.
9. Click on Cancel to exit the Novell Broker.
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 017.doc
Page: 6 of 15
Setting up of NDPS Manager.
NOTE: This step is not necessary if a NDPS Manager has already been created on the
Novell 5.xx server.
1. Launch Nwadmin32.exe and choose the container where the server resides. In this
case, “SEC”.
2. Right click the container and choose create. Scroll down and choose NDPS Manager,
then click OK.
3. Enter a name of your choice to the NDPS Manager Name, its Resident Server, and
Database Volume. Click on Create.
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 017.doc
Page: 7 of 15
4. Once the NDPS Manager is created, it must be loaded. At the server console type at the
command line: NDPSM ‘THE NAME OF YOUR NDPS MANAGER.’ This will load the
NDPS manager. In this example: NDPSM NDPSMGR. This must be running to be able
to print.
NDPS manager. In this example: NDPSM NDPSMGR. This must be running to be able
to print.
5. This line should also be entered at the servers AUTOEXEC.NCF. This will allow the
NDPS Manager to load automatically. Otherwise step 4 would be required every time
you restart the server.
you restart the server.
Creating a Printer Agent.
1. Start Nwadmin32.exe, select the container. In this case, SEC.
2. Right click the container and choose create. Scroll down and choose NDPS Printer, then
click on OK.
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 017.doc
Page: 8 of 15
3. Give the printer a name.
NOTE: This name can be any name, but a short and descriptive name is best for identifying
objects on a NDS tree.
objects on a NDS tree.
4. Confirm that Create a New Printer Agent is chosen under the Printer Agent Source.
Click on the Create button.
5. Under NDPS Manager Name, click on the browse button and select the NDPS Manager
you created (in this case NDPSMGR). Also, make sure that Novell Printer Gateway is
selected under Gateway Types. Click on OK.
selected under Gateway Types. Click on OK.
Click on the first or last page to see other AR-NC3D (serv.man20) service manuals if exist.