Sharp AR-MS1 Service Manual ▷ View online
AR-MS1 UNPACKING AND INSTALLATION-2
4) Attach the tray.
5) Remove the AC inlet cover and then remove the rear cabinet of the
stand/paper drawer.
<1>Remove the screw that fixes the AC inlet cover and then remove the
AC inlet cover.
<2>Remove the AC cord of the power supply unit from the inlet
connector of the main unit of the printer.
Remove the four screws that fix the rear cabinet and then remove the
rear cabinet.
rear cabinet.
If a multi purpose drawer has been installed, steps 6) to 8) are needed.
If a stand/MPD & 2000 sheet paper drawer or stand/3 x 500 sheet paper
drawer has been installed, proceed to step 9).
6) Process the AC inlet cover attached to the rear cabinet of the stand/
paper drawer.
Remove the screw that fixes the AC inlet cover and then remove the
AC inlet cover.
Process the AC inlet cover as shown in the illustration.
Process the AC inlet cover as shown in the illustration.
7) Attach the power supply unit.
Attach the power supply unit to the positioning portion of the multi
purpose drawer and then fix it with three supplied screws.
8) Connect the power supply unit harness to the PCU PWB of the main
unit of the printer.
<1>Remove the screw that fixes the harness cover of the main unit of the
printer and slide the harness cover up to remove it.
Process the harness cover as shown in the illustration.
Process the harness cover as shown in the illustration.
<2>Connect the power supply unit harness connector to CN11 (red
connector) of the PCU PWB of the main unit of the printer.
<3>Reattach the harness cover to its original position and fix it with the
removed screw.
At this time, ensure that the power supply unit harness is arranged
as shown in the illustration.
•Fix the harness securely to the wire saddle.
Tray
Screw
AC inlet cover
Rear cabinet
AC inlet cover
Cut out.
Optional power supply unit
Screws
Screw
Harness cover
Cut out.
Screw
Connector
CN11
Wire saddle
Harness cover
Optional power
supply harnesses
supply harnesses
Screw
Wire saddle
AR-MS1 UNPACKING AND INSTALLATION-3
9) Arrange the harness of the mail-bin stacker.
<1>Pass the harness of the mail-bin stacker between the power supply
<1>Pass the harness of the mail-bin stacker between the power supply
unit and the frame of the stand/paper drawer and connect it to the
connector of the power supply unit.
<2>Fit the snap band attached to the mail-bin stacker at the position
shown in the illustration to fix the harness.
10) Attach the rear cabinet of the stand/paper drawer.
<1>Pass the AC cord of the power supply unit as shown in the illustration
and fix the rear cabinet of the stand/paper drawer with the screws.
<2>Attach the AC inlet cover to the rear cabinet of the stand/paper
drawer and fix it with the removed screw.
11) Connect the AC cord of the optional power supply unit to the main
unit of the printer.
<1>Connect the AC cord of the power supply unit to the inlet connector
of the main unit of the printer at the location shown in the illustration.
Power supply
unit connector
unit connector
Snap band
Mail-bin stacker harness
Rear cabinet
Screw
AC inlet cover
AC cord
AR-MS1 EXTERNAL VIEWS AND INTERNAL STRUCTURES-1
[5] EXTERNAL VIEWS AND INTERNAL STRUCTURES
A. External view
B. Internal structure
1
Top cover
2
Top stage tray
3
Male bin tray
4
Front cover
Code
Name
Function
Remark
1
PID
2
MPPD1
3
MPPD2
4
MPPD3
5
MPPD4
6
MPPD5
7
MPFD1
8
MPFD2
9
MPFD3
10
MPFD4
11
MPFD5
12
MPFD6
13
MPFD7
14
MPFD8
15
DOPD
1
2
4
3
1.PID
2.MPPD1
3.MPPD2
4.MPPD3
5.MPPD4
6.MPPD5
7.MPFD1
8.MPFD2
9.MPFD3
10.MPFD4
11.MPFD5
12.MPFD6
13.MPFD7
14.MPFD8
15.DOPD
16.MDD1
AR-MS1 EXTERNAL VIEWS AND INTERNAL STRUCTURES-2
C. Motor, clutch, PWB
Code
Name
Function
Remark
1
SM MAIN PWB
Male bin control PWB
Communication with the machine, operation
and control of the machine
and control of the machine
2
MM
Transport motor
Drives rollers.
3
GSOL1
No. 1 gate solenoid
No. 1 gate select
4
GSOL2
No. 2 gate solenoid
No. 2 gate select
5
GSOL3
No. 3 gate solenoid
No. 3 gate select
6
GSOL4
No. 4 gate solenoid
No. 4 gate select
7
GSOL5
No. 5 gate solenoid
No. 5 gate select
8
GSOL6
No. 6 gate solenoid
No. 6 gate select
9
GSOL7
No. 7 gate solenoid
No. 7 gate select
10
FGS
Paper entry gate solenoid
Paper entry gate select
1.SM MAIN PWB
2.MM
3.GSOL1
10.FGS
4.GSOL2
5.GSOL3
6.GSOL4
7.GSOL5
8.GSOL6
9.GSOL7
Click on the first or last page to see other AR-MS1 service manuals if exist.