Sharp AR-M620 (serv.man70) FAQ ▷ View online
REV. 1.00
13
INSERTSHEET: Transparency Inserts Setting
To specify what number of pages is set as transparency inserts,
“INSERTSHEET” is defined.
PJL SET Command Parameter
Argument: <Page_num><Mode>#<Tray>$<Type>%<Size>
254 strings
Parameter
Meaning
< Page_num >
Specify the page number to insert at the print.
<Mode> See
Table
Param-A.
<Tray> See
Table
Param-B.
<Type> See
Table
Param-C.
<Size> See
Table
Param-D.
All four pair of parameters has to be described.
(Example)
@PJL SET INSERTSHEET =
“1SF#2$0%0 5B#10$0%0 10D#4$0%0”
Print data to the sheet from the Tray2 with 1-sided (front cover) as the
first page.
Insert blank page from the Inserter as the fifth page.
Print data to the sheet from the Tray4 with 2-sided as the 10th page.
To specify many pages, use a space as the separator.
Or, execute the description, dividing the command to many lines.
(Example)
@PJL SET INSERTSHEET = “1SF#2$0%0”
@PJL SET INSERTSHEET = “5B#10$0%0”
@PJL SET INSERTSHEET = “10D#4$0%0”
This example shows the same specification as the above example.
REV. 1.00
14
If the specified number of pages is bigger than the number of insertion
pages for the Dragon product, the PJL commands are executed in order of
its appearance and the data that exceeds the insertion number of pages
are ignored.
INTERLEAVE: Interleave Setting
To tell whether interleave for print job is executed, “INTERLEAVE” is
defined. This command is used to set “Transparency Inserts.”
defined. This command is used to set “Transparency Inserts.”
PJL SET Command Parameter
Parameter
Argument
Meaning
OFF
It is not executed,
BLANK
Data is not printed to
transparency inserts.
transparency inserts.
INTERLEAVE
ON Data
is
printed
to
transparency inserts.
(Note) When you use this command, it is desirable to set the
“PAPERTYPE” command to the transparency inserts type.
“PAPERTYPE” command to the transparency inserts type.
INTERLEAVESRC: Interleave Tray Setting
To tell from which tray interleave paper for print job is fed,
“INTERLEAVESRC” is defined. This command is used to set
“Transparency Inserts.”
“INTERLEAVESRC” is defined. This command is used to set
“Transparency Inserts.”
PJL SET Command Parameter
Parameter
Argument
INTERLEAVESRC
See Table Param-F.
When this command is used with the INTERLEAVETYPE command, the
INTERLEAVESRC command is given priority.
INTERLEAVESRC command is given priority.
(Note) When you use this command, it is desirable to set “PAPERTYPE”
command to the transparency inserts type.
command to the transparency inserts type.
INTERLEAVETYPE: Interleave Type Setting
To tell what types of interleave paper for a print job, “INTERLEAVETYPE”
is defined. This command is used to set “Transparency Inserts.”
is defined. This command is used to set “Transparency Inserts.”
REV. 1.00
15
PJL SET Command Parameter
Parameter
Argument
INTERLEAVETYPE
See Table Param-E.
When this command is used with INTERLEAVESRC command, the
INTERLEAVESRC command is given priority.
INTERLEAVESRC command is given priority.
JOBBOOKLET: Booklet Printing Control
To tell the print job is booklet printing, “JOBBOOKLET” is defined.
PJL SET Command Parameter
Parameter
Argument
Meaning
OFF
This job is not booklet printing.
JOBBOOKLET
ON
This job is booklet printing.
(Note) For the combination of PJL command about pamphlet, see
Table-F.
JOBSTAPLE: Stapler Control
To control staple, “JOBSTAPLE” is defined.
PJL SET Command Parameter
Parameter
Argument
Meaning
STAPLENO No
stapling
STAPLELEFT One
stapling
STAPLEBOTH
Two stapling
JOBSTAPLE
SADDLE Saddle
stitch
If this command is omitted, Dragon operates like ” STAPLENO” is
specified to an argument.
(Note) For the combination of PJL command about pamphlet, see
Table-F.
REV. 1.00
16
MARGINSHIFT: Margin Shift Setting
To set the margin at the side to combine, "MARGINSHIFT” is defined.
PJL SET Command Parameter
Parameter
Argument
Meaning
MARGINSHIFT
0 to 65535
Set margin to 0 – 65535 dots.
If this command is omitted, Dragon operates as 0 dots are specified to an
argument.
If the dot except 0 is specified, print the image that shifted the specified
dots from the bind standard.
OUTTRAY: Paper Output Position Setting
To specify the output destination, ”OUTTRAY is defined. The printer driver
software can control paper output tray number only. If the setting of this
parameter is not executable by the Dragon printer, this conflict is resolved
by the printer itself. The printer driver software sends the command head
of each print job.
software can control paper output tray number only. If the setting of this
parameter is not executable by the Dragon printer, this conflict is resolved
by the printer itself. The printer driver software sends the command head
of each print job.
PJL SET/DEFAULT Command Parameter
Parameter
Argument
Meaning
TRAY1
Output the output paper to the * top tray.
TRAY2
・Output the output paper to upper tray of
finisher.
・Output the output paper to the upper tray of
the saddle finisher.
TRAY3
・Output the output paper to the lower tray of
the finisher.
・Output the output paper to the middle tray of
the saddle finisher.
OUTTRAY
TRAY4
・Output the output paper to the saddle stitch
tray (lower part) of the saddle finisher.
Click on the first or last page to see other AR-M620 (serv.man70) service manuals if exist.