Sharp AR-M550 (serv.man30) FAQ ▷ View online
REV. 1.00
9
The order of paper feed starts from the left side.
Parameter
Argument
<Tray> See
Table
Param-B.
<Type> See
Table
Param-C.
Note:
A pair of two parameters must be specified.
7:Inserter can’t be set at the Tray parameter.
Tray parameter, 0:Auto and Type parameter, 0:Ignore can’t be combined.
(Example) @PJL SET CARBONPRINT = “#1$0#2$0#3$0” <CR><LF>
The first sheet shows Tray1, the second sheet shows Tray2, and
the third sheet shows Tray3.
@PJL SET CARBONPRINT = “#4$0#4$0#4$0” <CR><LF>
All paper is fed from Tray4.
FILING: Filing Condition Setting
To tell the document filing condition, “FILING” is defined.
PJL SET Command Parameter
Parameter
Argument
Explanation
OFF
Filing is not executed.
PERMANENCE
File data to the specified folder.
FILING
TEMPORALITY
File data to the temporary folder.
If this command is not specified, the default status is OFF.
If you specify PERMANENCE as an argument, you have to specify
FILINGFOLDERPASS”.
REV. 1.00
10
FILINGFOLDERPATH: Filing Directory Path Setting
When the “FILING” command is ” PERMANECE”, to specify which file to
save the data, “FILINGFOLDERPATH” is defined.
save the data, “FILINGFOLDERPATH” is defined.
PJL SET Command Parameter
Parameter
Argument
FILEINGFOLDERPATH
Specify a directory path.
30-digit or less string.
(Example)
l When you specify “DIR1” directory, which is the user folder:
@PJL SET FILINGFOLDERPATH = “DIR1” <CR><LF>
l When you specify the standard folder:
@PJL SET FILINGFOLDERPATH = “*standard” <CR><LF>
FILINGFOLDERPASSWORD: Password to a Filing Directory Setting
When the “FILING” command is ” PERMANECE” and you need a
password to access the folder specified with ”FILEINGFOLDERPATH”, to
tell the password, parameter, “FILEFOLDERPASSWORD” is defined.
password to access the folder specified with ”FILEINGFOLDERPATH”, to
tell the password, parameter, “FILEFOLDERPASSWORD” is defined.
PJL SET Command Parameter
Parameter
Argument
FILINGFOLDERPASSWORD
32-digit string key. (Hashed password)
Only 32-digit string is valid as key.
FRONTCOVER: Front Cover Setting
To tell whether front cover is set or not, and tell 2-sided or 1-sided,
“FRONTCOVER” is defined.
“FRONTCOVER” is defined.
PJL SET Command Parameter
Argument: <Mode>#<Tray>$<Type>%<Size>
10-digit string
REV. 1.00
11
Parameter
Argument
<Mode> See
Table
Param-A.
<Tray> See
Table
Param-B.
<Type> See
Table
Param-C.
<Size> See
Table
Param-D,
All four parameters must be described.
If these commands are not sent, the frontcover feature is OFF.
GANGING: Multiple Bundles Setting at the Pamphlet Process
To specify whether the machine stacks many bundles or not, “GANGING”
is defined.
is defined.
PJL SET Command Parameter
Parameter
Argument
Meaning
MULTI
Execute pamphlet process with many
bundles.
bundles.
GANGING
SINGLE
Execute pamphlet process with one
bundle.
bundle.
When this command is not specified, default is SINGLE.
(Note) For combination of PJL command about pamphlet, see Table-F.
GANGINGNUMBER: Specify Bundles at Pamphlet Process
When you specify the process that stacks and binds many bundles, to direct
the number of sheets that the machine executes the center folding and the
staple process, GANGINGNUMBER” is defined.
Only when GANGING command is ”MULTI” and PAGEIMAGEINFO
is ”PAMPHLET”, this specification is enabled.
PJL SET Command Parameter
Argument:
#<Block Number>$<Sheet Number> or
#<Block Number>$<Sheet Number>#<Block Number>$<Sheet Number>
REV. 1.00
12
24 figures character string at the maximum.
The indication order starts from left side.
Parameter
Argument
Meaning
<Block Number>
Describes it
decimally.
decimally.
Number of bundles is specified.
The first number is 1.
The first number is 1.
<Sheet Number>
Describes it
decimally.
decimally.
Specify the number of sheets that
consists of bundles.
consists of bundles.
(Example
1)
@PJL SET GANGINGNUMBER = “#1$10”
This shows that center folding and staple process are executed from the first to
(last-1)th bundle every 10 sheets. As for the last bundle, center folding and
staple process are automatically executed to the range from 0 sheet to 9
sheets.
(Example 2)
(last-1)th bundle every 10 sheets. As for the last bundle, center folding and
staple process are automatically executed to the range from 0 sheet to 9
sheets.
(Example 2)
@PJL SET GANGINGNUMBER = “#1$10#4$9”
This shows that center folding and staple process are executed from the first to
third bundle every 10 sheets, and that center folding and staple process are
executed from fourth bundle to (last-1)th bundle every nine sheets. As for the
last bundle, center folding and staple process are automatically executed to the
range from 0 sheet to 9 sheets.
(Note) For combination of PJL command about Pamhlet, see Table-F.
third bundle every 10 sheets, and that center folding and staple process are
executed from fourth bundle to (last-1)th bundle every nine sheets. As for the
last bundle, center folding and staple process are automatically executed to the
range from 0 sheet to 9 sheets.
(Note) For combination of PJL command about Pamhlet, see Table-F.
HALFTONEENHANCE: Printing Image Control
To tell that a halftone of print image is enhanced, “HALFTONEENHANCE”
is defined.
PJL SET Command Parameter
Parameter
Argument
Meaning
OFF Off
HALFTONEENHACE
ON
Halftone is enhanced to all
images.
images.
(ON will be used if there is
no difference between Text only and
Grayscale only.)
Click on the first or last page to see other AR-M550 (serv.man30) service manuals if exist.