Sharp AR-M550 (serv.man30) FAQ ▷ View online
REV. 1.00
6
PJL
PJL (Printer Job Language) is a printer control command developed by
Hewlett-Packard. General information of PJL is described in the HP
document, Printer Job Language Technical Reference Manual
(5021-0380) in detail.
In the Dragon printing system, PJL is used for switching PDL, defining job
separation, selecting a printer finisher, and other purpose.
REV. 1.00
7
Added PJL Command for Dragon (Parameter for Print Direction)
The following parameters of the PJL SET/DEFAULT command are
specially defined PJL commands in the Dragon printing system. These
parameters are not used with HP printers.
ACCOUNTNUMBER: Job Account Number
“Print Job Accounting” is to explain each the print job number.
The PJL SET command parameter, “ACCOUNTNUMBER” is defined to job
account number.
PJL SET Command Parameter
Parameter
Argument
Meaning
ACCOUNT
NUMBER
“xxxxx”
Print Job Account Number
“00000"
to
"99999"
Only 5-digit number is valid as Job
Account Number.
Account Number.
ACQUISITIONMETHOD: Data Acquisition Method
“ACQUISITONMETHOD” is to explain each print job number to indicate by
what route the data to execute was acquired.
The PJL SET command parameter, “ACQUISITONMETHOD” is defined to
indicate by what route the data to executed was acquired.
PJL SET Command Parameter
Parameter
Meaning
DIRECTEMAIL
Show the data is acquired through E-MAIL of the
direct print feature.
direct print feature.
DIRECTWEB
Show the data is acquired through WEB of the
direct print feature.
direct print feature.
REV. 1.00
8
DIRECTFTP
Show the data is acquired through FTP of the
direct print feature.
direct print feature.
OTHERS
Show the data is acquired through other method.
When you don’t specify a parameter, it is treated as “OTHERS”.
Supplement: This PJL command was added to classify kinds of jobs at the job
log feature.
BACKCOVER: Back Cover Setting
To tell whether back cover is set or not, and tell 2-sided or 1-sided,
“BACKCOVER” is defined.
“BACKCOVER” is defined.
PJL SET Command Parameter
Argument: <Mode>#<Tray>$<Type>%<Size>
10-digit string
Parameter
Argument
<Mode> See
Table
Param-A.
<Tray> See
Table
Param-B.
<Type> See
Table
Param-C.
<Size> See
Table
Param-D.
All four parameters must be described.
If these commands are not sent, the Backcover feature is OFF.
CARBONPRINT: Carbon Copy Print Setting
To specify the order of input tray to feed at the carbon copy print,
“CARBONPRINT” is defined.
“CARBONPRINT” is defined.
PJL SET Command Parameter
Argument: #<Tray>$<Type>#<Tray>$<Type>
･･･#<Tray>$<Type>
40-digit string
REV. 1.00
9
The order of paper feed starts from the left side.
Parameter
Argument
<Tray> See
Table
Param-B.
<Type> See
Table
Param-C.
Note:
A pair of two parameters must be specified.
7:Inserter can’t be set at the Tray parameter.
Tray parameter, 0:Auto and Type parameter, 0:Ignore can’t be combined.
(Example) @PJL SET CARBONPRINT = “#1$0#2$0#3$0” <CR><LF>
The first sheet shows Tray1, the second sheet shows Tray2, and
the third sheet shows Tray3.
@PJL SET CARBONPRINT = “#4$0#4$0#4$0” <CR><LF>
All paper is fed from Tray4.
FILING: Filing Condition Setting
To tell the document filing condition, “FILING” is defined.
PJL SET Command Parameter
Parameter
Argument
Explanation
OFF
Filing is not executed.
PERMANENCE
File data to the specified folder.
FILING
TEMPORALITY
File data to the temporary folder.
If this command is not specified, the default status is OFF.
If you specify PERMANENCE as an argument, you have to specify
FILINGFOLDERPASS”.
Click on the first or last page to see other AR-M550 (serv.man30) service manuals if exist.