Sharp AR-M550 (serv.man30) FAQ ▷ View online
REV. 1.00
41
Invoice
5.5x8.5 inch
<Esc>&l5A
D1 75 05 6F 08
F8 2F
C0 02 F8 30
F8 2F
C0 02 F8 30
Postcard, JPOST
100x148 mm
<Esc>&l71A
C0 0E F8 25
16K
195x270 mm
<Esc>&l118A
D1 9E 07 8C 0A
F8 2F
C0 02 F8 30
F8 2F
C0 02 F8 30
8K
270x390 mm
<Esc>&l119A
D1 8C 0A 3C 0F
F8 2F
C0 02 F8 30
F8 2F
C0 02 F8 30
Custom paper size
--
<Esc>&l101A
D1 xx xx yy yy
F8 2F
C0 02 F8 30
F8 2F
C0 02 F8 30
Note) PCL XL code for Custom paper size: xx xx yy yy
For example - If custom paper size is "150 * 200 mm",
150 * 10 = 1500(decimal)= 5dc (hex) -> xx xx = "DC 05"
200 * 10 = 2000(decimal)= 7d0 (hex) -> yy yy = "D0 07"
Paper Source Selection
The supported paper source range depends on the model of printer design.
Therefore, printer command for the paper source selection should be
defined to the particular printer. The following table shows the supported
paper source and paper source selection printer command in the Dragon
printing system.
Paper Source
Esc command
PCL XL code
Tray 1
<Esc>&l1H
C0 04 F8 26
Tray 2
<Esc>&l4H
C0 05 F8 26
Tray 3
<Esc>&l5H
C0 08 F8 26
Tray 4
<Esc>&l20H
C0 09 F8 26
LCC
<Esc>&l22H
C0 F1 F8 26
Manual Feed Auto
<Esc>&l8H
C0 03 F8 26
Auto
<Esc>&l7H
C0 01 F8 26
Inserter
NA
NA
Output Tray Selection
The following table shows the supported paper source and output tray
selection printer command in the Dragon printing system.
REV. 1.00
42
Output tray
Esc command
PCL XL code
Tray 1
<Esc>&l1G
NA
Tray 2
<Esc>&l2G
NA
Tray 3
<Esc>&l3G
NA
Tray 4
<Esc>&l4G
NA
REV. 1.00
43
PostScript
PostScript is a page description language developed by Adobe
Corporation. The Dragon printer firmware is using the Xionics Intelligent
Peripheral System. This program is a PostScript Level3 interpreter.
The specification of the PostScript does not cover the product specific
portion. In this section, the detail specifications are described.
New entries are added to page device dictionary of PostScript, and values
of some entries (paper source and paper size) are modified.
Input and Output Attributes
InputAttributes
InputAttributes describes the attributes of all physical media available on
the current Dragon device. The keys in the InputAttributes are integer
position numbers representing media sources on the Dragon device.
InputAttributes
Destination
Meaning
0
Tray1
Standard tray LCC (Left)
1
Tray2
Standard tray LCC (Right)
2 NA
3 Bypass
(Auto)
Bypass
Tray
Auto
Feed
(Optional)
4
Tray3
Tray 3 of 2 Tray Desks
5
Tray4
Tray 4of 2 Tray Desks
6 NA
NA
7
NA
Side LCC (Optional)
8 NA
NA
9 Auto
Auto
10 Inserter
Inserter
(Optional)
REV. 1.00
44
OutputAttributes
OutputAttributes specifies the attributes of all media destinations
currently available for use by the current Dragon device. OutputAttributes
contains an entry for each available destination, for example, each output
paper tray on a printer. The key for each entry is an arbitrary integer
position number. The value is a sub-dictionary describing the attributes of
that destination. Each such sub-dictionary must include an OutputType
entry, with the same meaning as the corresponding page device parameter
described in this table.
OutputAttributes
Destination
Meaning
0
(exit bin 1)
Top tray (Standard)
1 (finisher
bin1)
・ Upper tray of the finisher tray
(Optional)
・ Upper tray of the saddle finisher
(Optional)
2 (finisher
bin2)
・ Lower tray of the finisher tray
(Optional)
・ Middle tray of the saddle finisher
(Optional)
3 (finisher
bin3)
・ Lower tray of the saddle finisher.
(Optional)
Getting Options
RAM Size
RamSize of the systemparams dictionary sets a total memory (RAM) size,
not an available memory size.
Entry
Variable
Defined Value
RAM Size
/RamSize
Integer
value
Example:
currentsystemparams /RamSize get 1048576 div floor cvi
Input Trays
The keys (integer position numbers) in the InputAttributes of the
pagedevice dictionary indicate the installed media sources on the Dragon.
Click on the first or last page to see other AR-M550 (serv.man30) service manuals if exist.