Sharp AR-M550 (serv.man30) FAQ ▷ View online
REV. 1.00
31
Parameter
Argument
Meaning
MINCYOU
FONT
GOTHIC
Default font used when printing
in Kanji mode.
in Kanji mode.
Default
is
MINCYO.
PJL Command Parameter of PC-FAX Control
The following PJL SET/DEFAULT commands are supported for PC-FAX
emulation.
DRIVERHEADER
PJL SET Command Parameter
Parameter
Argument
ON
Turn on the Dragon’s sending source.
DRIVERHEADER
OFF
Turn off the Dragon’s sending source.
FAXIMAGESIZE: PC-FAX Control
PJL SET Command Parameter
Parameter
Argument
FAXIMAGESIZE
In the case of sending reservation,
number of bytes for image data is
shown in decimal system as
0…4,294,967,295.
number of bytes for image data is
shown in decimal system as
0…4,294,967,295.
REV. 1.00
32
FAXJOBID: PC-FAX Control
PJL SET Command Parameter
Parameter
Argument
FAXJOBID
Specify unique job ID from the PC-FAX
application.
application.
FAXMEMORYBOXCOUNT: PC-FAX Control
PJL SET Command Parameter
Parameter
Meaning
FAXMEMORYBOXCOUNT
Show the number at the broadcasting
in decimal system of 0…4,294,967,295.
in decimal system of 0…4,294,967,295.
MFPPASSWORD Control
PJL SET Command Parameter
Parameter
Meaning
MFPPASSWORD
Specify password character string with
user name that permitted PC-FAX
output.
user name that permitted PC-FAX
output.
Only the 32-digit hashed password
strings are valid as key.
strings are valid as key.
MFPUSERNAME: PC-FAX Control
PJL SET Command
Parameter
Meaning
MFPUSERNAME
Specify user name that permits the
PCFAX output. 64-digit or smaller
string.
PCFAX output. 64-digit or smaller
string.
REV. 1.00
33
TOTALDATASIZE: PC-FAX Control
PJL SET Command
Parameter
Meaning
TOTALDATASIZE
Show the data size that PJL header and
PJL tray are removed from the send data
in byte unit number of
PJL tray are removed from the send data
in byte unit number of
0…4,294,967,295.
Unused PJL Command for Dragon
In the Dragon printing system, the following PJL commands are not used.
This section only declares that the printer driver does not use the following
PJL commands. The description of this section does not have the effect to
firmware implementation.
OUTBIN: Output Destination Selection
“OUTTRAY” parameter is used in the Dragon printing system.
Dragon will ignore “OUTBIN” of the PJL SET/DEFAULT command.
RESOLUTION: Resolution Control
The printing resolution is only 600dpi for the Dragon printing system.
Dragon will ignore “RESOLUTION” of the PJL SET/DEFAULT command
and print any data in 600dpi.
LANG: Language Setting for Messages
In the Dragon system, language setting is controlled by printer engine. This
parameter of the PJL command is ignored in the Dragon printing system.
REV. 1.00
34
PJL Parameter for Dragon (Parameters used on many PJLs)
Table-A Param-A
・ <Mode>Parameter for INSERTSHEET.
・ <Mode>Parameter for FRONTCOVER.
・ <Mode>Parameter for BACKCOVER.
Argument Meaning
B
2-sided print is not executed.
SF
Data is printed to front cover only.
SB
Data is printed to back cover only.
D
Data is printed to 2-sided.
Table-B Param-B
・ <Tray>Parameter for INSERTSHEET.
・ <Tray>Parameter for FRONTCOVER.
・ <Tray>Parameter for BACKCOVER.
・ <Tray>Parameter for CARBONPRINT.
Argument
Meaning
0 Auto
1
Tray 1 (LCC Left)
2 Tray
2
(LCC
Right)
3 Tray
3
4 Tray
4
5 Tray5
(Side
LCC)
6 Bypass
Tray
7 Inserter
Table-C Param-C
・ < Type >Parameter for INSERTSHEET.
・ < Type >Parameter for FRONTCOVER.
Click on the first or last page to see other AR-M550 (serv.man30) service manuals if exist.