Sharp AR-M550 (serv.man30) FAQ ▷ View online
REV. 1.00
16
MARGINSHIFT: Margin Shift Setting
To set the margin at the side to combine, "MARGINSHIFT” is defined.
PJL SET Command Parameter
Parameter
Argument
Meaning
MARGINSHIFT
0 to 65535
Set margin to 0 – 65535 dots.
If this command is omitted, Dragon operates as 0 dots are specified to an
argument.
If the dot except 0 is specified, print the image that shifted the specified
dots from the bind standard.
OUTTRAY: Paper Output Position Setting
To specify the output destination, ”OUTTRAY is defined. The printer driver
software can control paper output tray number only. If the setting of this
parameter is not executable by the Dragon printer, this conflict is resolved
by the printer itself. The printer driver software sends the command head
of each print job.
software can control paper output tray number only. If the setting of this
parameter is not executable by the Dragon printer, this conflict is resolved
by the printer itself. The printer driver software sends the command head
of each print job.
PJL SET/DEFAULT Command Parameter
Parameter
Argument
Meaning
TRAY1
Output the output paper to the * top tray.
TRAY2
・Output the output paper to upper tray of
finisher.
・Output the output paper to the upper tray of
the saddle finisher.
TRAY3
・Output the output paper to the lower tray of
the finisher.
・Output the output paper to the middle tray of
the saddle finisher.
OUTTRAY
TRAY4
・Output the output paper to the saddle stitch
tray (lower part) of the saddle finisher.
REV. 1.00
17
PAGEIMAGEINFO: Created Image Information
To tell the image information created by a driver to the controller,
“PAGEIMAGEINFO” is defined.
This command is saved as an image. When user reuses the image, it is
used as the information to identify what document image it is or by what
style the controller permits the re-use.
PJL SET Command Parameter
Parameter
Argument
Meaning
ONEUP
Show that one page image is
created to the one sheet.
created to the one sheet.
TWOUP
Show that two pages image is
created to the one sheet.
created to the one sheet.
FOURUP
Show that four pages image is
created to the one sheet.
created to the one sheet.
SIXUP
Show that six pages image is
created to the one sheet.
created to the one sheet.
EIGHTUP
Show that eight pages image is
created to the one sheet.
created to the one sheet.
PAGEIMAGEINFO
PAMPHLET
Show that two pages image that
is suitable for pamphlet print to
one sheet is created. (This is
enabled only when the host
creates the Pamphlet image.
When controller side executes
pamphlet process, it is not
applied.)
is suitable for pamphlet print to
one sheet is created. (This is
enabled only when the host
creates the Pamphlet image.
When controller side executes
pamphlet process, it is not
applied.)
When this information doesn’t exist, the page information is treated as
1-up.
(Note) For the combination of PJL commands about pamphlet, see the
Table-F.
PAPERTYPE: Paper Type Setting
To tell what type of paper a print job is printed on, “PAPERTYPE” is
defined.
REV. 1.00
18
PJL SET/DEFAULT Command Parameter
Parameter
Argument
PAPERTYPE
See Table Param-E.
PRINTID: ID for Test Print Job (Font List, or Configuration Page, and so on.)
To distinguish the print job created at the system from the print job from
external, ”PRINTID” is defined.
PJL SET Command Parameter
Parameter
Argument
Meaning
PRINTID
“xxxxxxxxx”
Test print job ID.
“000000000" to
"999999999"
9-digit number
The job that doesn’t have @PJL SET PRINTID or job that has @PJL SET
PRINTID=0 becomes normal print job from external.
PUNCH: Punch Setting
To tell the punch setting for print job, "PUNCH” is defined.
PJL SET Command Parameter
Parameter
Argume
nt
nt
Meaning
OFF
Do not set punch to output paper.
PUNCH
ON
Set punch to output paper.
If this command is omitted, Dragon operates like “OFF” is specified to an
argument.
REVERSEIMAGE: 180 degrees Rotation Print
To print the created image, rotating 180 degrees, “REVERSEIMAGE” is
defined.
defined.
PJL SET Command Parameter
REV. 1.00
19
Parameter
Argument
Meaning
OFF
Do not rotate an image 180 degrees.
REVERSEIMAGE
ON
Rotate an image 180 degrees.
If this command is omitted, Dragon operates like “OFF” is specified to an
argument.
RIPONCE: Collate and Uncollate Setting
If multiple copies set at COPIES are specified, to specify Collate output or
Uncollate output, this command is used.
Uncollate output, this command is used.
PJL SET, DEFAULT Command Parameter
Parameter
Argument
Meaning
OFF Uncollate
is
executed.
RIPONCE
ON
Collate is executed.
This command is ON by default.
If 1 is specified at COPIES, whether Uncollate or Collate is specified, the
same output result is given,
same output result is given,
SCALEDOWN: Image Scale Down in ESC/P
“Image scale down” is to scale down or print the print image into the specified
paper in ESC/P emulation.
To set values of the image scale down item, a parameter “SCALEDOWN”
of PJL SET/DEFAULT command is defined.
of PJL SET/DEFAULT command is defined.
PJL SET/DEFAULT Command
Parameter
Argument
Meaning
OFF
Print image is not scaled down.
F15B4L
Print image is scaled down from F15
paper to B4 paper-Landscape.
paper to B4 paper-Landscape.
F15A4L
Print image is scaled down from F15
paper to A4 paper-Landscape.
paper to A4 paper-Landscape.
F10A4P
Print image is scaled down from F10
paper to A4 paper-Portrait.
paper to A4 paper-Portrait.
SCALEDOWN
B4A4L
Print image is scaled down from B4
paper to A4 paper-Landscape.
paper to A4 paper-Landscape.
Click on the first or last page to see other AR-M550 (serv.man30) service manuals if exist.