Sharp AR-M550 (serv.man30) FAQ ▷ View online
REV. 1.00
11
Parameter
Argument
<Mode> See
Table
Param-A.
<Tray> See
Table
Param-B.
<Type> See
Table
Param-C.
<Size> See
Table
Param-D,
All four parameters must be described.
If these commands are not sent, the frontcover feature is OFF.
GANGING: Multiple Bundles Setting at the Pamphlet Process
To specify whether the machine stacks many bundles or not, “GANGING”
is defined.
is defined.
PJL SET Command Parameter
Parameter
Argument
Meaning
MULTI
Execute pamphlet process with many
bundles.
bundles.
GANGING
SINGLE
Execute pamphlet process with one
bundle.
bundle.
When this command is not specified, default is SINGLE.
(Note) For combination of PJL command about pamphlet, see Table-F.
GANGINGNUMBER: Specify Bundles at Pamphlet Process
When you specify the process that stacks and binds many bundles, to direct
the number of sheets that the machine executes the center folding and the
staple process, GANGINGNUMBER” is defined.
Only when GANGING command is ”MULTI” and PAGEIMAGEINFO
is ”PAMPHLET”, this specification is enabled.
PJL SET Command Parameter
Argument:
#<Block Number>$<Sheet Number> or
#<Block Number>$<Sheet Number>#<Block Number>$<Sheet Number>
REV. 1.00
12
24 figures character string at the maximum.
The indication order starts from left side.
Parameter
Argument
Meaning
<Block Number>
Describes it
decimally.
decimally.
Number of bundles is specified.
The first number is 1.
The first number is 1.
<Sheet Number>
Describes it
decimally.
decimally.
Specify the number of sheets that
consists of bundles.
consists of bundles.
(Example
1)
@PJL SET GANGINGNUMBER = “#1$10”
This shows that center folding and staple process are executed from the first to
(last-1)th bundle every 10 sheets. As for the last bundle, center folding and
staple process are automatically executed to the range from 0 sheet to 9
sheets.
(Example 2)
(last-1)th bundle every 10 sheets. As for the last bundle, center folding and
staple process are automatically executed to the range from 0 sheet to 9
sheets.
(Example 2)
@PJL SET GANGINGNUMBER = “#1$10#4$9”
This shows that center folding and staple process are executed from the first to
third bundle every 10 sheets, and that center folding and staple process are
executed from fourth bundle to (last-1)th bundle every nine sheets. As for the
last bundle, center folding and staple process are automatically executed to the
range from 0 sheet to 9 sheets.
(Note) For combination of PJL command about Pamhlet, see Table-F.
third bundle every 10 sheets, and that center folding and staple process are
executed from fourth bundle to (last-1)th bundle every nine sheets. As for the
last bundle, center folding and staple process are automatically executed to the
range from 0 sheet to 9 sheets.
(Note) For combination of PJL command about Pamhlet, see Table-F.
HALFTONEENHANCE: Printing Image Control
To tell that a halftone of print image is enhanced, “HALFTONEENHANCE”
is defined.
PJL SET Command Parameter
Parameter
Argument
Meaning
OFF Off
HALFTONEENHACE
ON
Halftone is enhanced to all
images.
images.
(ON will be used if there is
no difference between Text only and
Grayscale only.)
REV. 1.00
13
INSERTSHEET: Transparency Inserts Setting
To specify what number of pages is set as transparency inserts,
“INSERTSHEET” is defined.
PJL SET Command Parameter
Argument: <Page_num><Mode>#<Tray>$<Type>%<Size>
254 strings
Parameter
Meaning
< Page_num >
Specify the page number to insert at the print.
<Mode> See
Table
Param-A.
<Tray> See
Table
Param-B.
<Type> See
Table
Param-C.
<Size> See
Table
Param-D.
All four pair of parameters has to be described.
(Example)
@PJL SET INSERTSHEET =
“1SF#2$0%0 5B#10$0%0 10D#4$0%0”
Print data to the sheet from the Tray2 with 1-sided (front cover) as the
first page.
Insert blank page from the Inserter as the fifth page.
Print data to the sheet from the Tray4 with 2-sided as the 10th page.
To specify many pages, use a space as the separator.
Or, execute the description, dividing the command to many lines.
(Example)
@PJL SET INSERTSHEET = “1SF#2$0%0”
@PJL SET INSERTSHEET = “5B#10$0%0”
@PJL SET INSERTSHEET = “10D#4$0%0”
This example shows the same specification as the above example.
REV. 1.00
14
If the specified number of pages is bigger than the number of insertion
pages for the Dragon product, the PJL commands are executed in order of
its appearance and the data that exceeds the insertion number of pages
are ignored.
INTERLEAVE: Interleave Setting
To tell whether interleave for print job is executed, “INTERLEAVE” is
defined. This command is used to set “Transparency Inserts.”
defined. This command is used to set “Transparency Inserts.”
PJL SET Command Parameter
Parameter
Argument
Meaning
OFF
It is not executed,
BLANK
Data is not printed to
transparency inserts.
transparency inserts.
INTERLEAVE
ON Data
is
printed
to
transparency inserts.
(Note) When you use this command, it is desirable to set the
“PAPERTYPE” command to the transparency inserts type.
“PAPERTYPE” command to the transparency inserts type.
INTERLEAVESRC: Interleave Tray Setting
To tell from which tray interleave paper for print job is fed,
“INTERLEAVESRC” is defined. This command is used to set
“Transparency Inserts.”
“INTERLEAVESRC” is defined. This command is used to set
“Transparency Inserts.”
PJL SET Command Parameter
Parameter
Argument
INTERLEAVESRC
See Table Param-F.
When this command is used with the INTERLEAVETYPE command, the
INTERLEAVESRC command is given priority.
INTERLEAVESRC command is given priority.
(Note) When you use this command, it is desirable to set “PAPERTYPE”
command to the transparency inserts type.
command to the transparency inserts type.
INTERLEAVETYPE: Interleave Type Setting
To tell what types of interleave paper for a print job, “INTERLEAVETYPE”
is defined. This command is used to set “Transparency Inserts.”
is defined. This command is used to set “Transparency Inserts.”
Click on the first or last page to see other AR-M550 (serv.man30) service manuals if exist.