Sharp AR-M550 (serv.man28) User Manual / Operation Manual ▷ View online
MAIN FEATURES
1-6
Tab Copy
See page 5-26
Copying is possible on the tabs of tabbed paper.
Card Shot
See page 5-28
The front and back of a card can be copied onto
one sheet of paper.
This function is convenient for making copies for
certification purposes and helps save paper.
one sheet of paper.
This function is convenient for making copies for
certification purposes and helps save paper.
Job programs
See page 5-31
Various steps of a copy operation can be stored
as a program, and up to 10 programs can be
stored. Saving frequently used sets of settings in
a program saves you the trouble of selecting
those settings each time you wish to use them.
as a program, and up to 10 programs can be
stored. Saving frequently used sets of settings in
a program saves you the trouble of selecting
those settings each time you wish to use them.
Mirror Image
See page 5-30
A mirror image copy can be made.
B/W Reverse
See page 5-30
White and black can be inverted on a copy to
produce a negative image.
produce a negative image.
Interrupting a copy run
See page 5-33
A copy job in progress can be interrupted for a
rush job.
rush job.
Original
Tab paper
Copy
INDEX
INDEX
Tab width
A4 : Maximum of 20mm (51/64")
8-1/2" x 11" : Maximum of 17mm (5/8")
8-1/2" x 11" : Maximum of 17mm (5/8")
Original
Example:
Portrait
A4 (8-1/2") size
Portrait
A4 (8-1/2") size
Example:
Landscape
A4 (8-1/2") size
Landscape
A4 (8-1/2") size
Copy
Back of
card
Front of
card
CARD
CARD
CARD
JOB PROGRAMS
PRESS PROGRAM NUMBER.
RECALL
Original
Copy
Original
Copy
AUTO
AUTO
AUTO
A4
ORIGINAL
EXPOSUR
A4
INTERRUPT
MAIN FEATURES
1-7
1
Offset mode
See page 3-4
Each set of output can be offset slightly from other
sets for easy separation.
sets for easy separation.
Staple sort mode
See page 3-4
Sets of copies can be automatically stapled.
Saddle stitch
See page 3-5
When a saddle stitch finisher is installed, copies
can be automatically folded in half and stapled at
the fold. (Use with the pamphlet function (see
page 5-6) or book copy function (see page 5-25).)
can be automatically folded in half and stapled at
the fold. (Use with the pamphlet function (see
page 5-6) or book copy function (see page 5-25).)
Hole punching
See page 3-5
Copies can be punched to add holes.
Inserter mode
See page 3-15
Blank or already printed-on sheets of paper can
be added as a cover or an insert without being
printed on. The inserter can be used to feed heavy
sheets of paper that cannot be fed from other
trays.
be added as a cover or an insert without being
printed on. The inserter can be used to feed heavy
sheets of paper that cannot be fed from other
trays.
Document filing function
See chap. 7
A document image can be stored on the hard disk.
A stored file can easily be called up and printed or
transmitted.
A stored file can easily be called up and printed or
transmitted.
Offset mode
Non-Offset mode
*When the Finisher or Saddle stitch finisher is
installed.
Original
Copy
*When the Finisher or Saddle stitch finisher is
installed.
6
7
Saddle stitch binding
*When the Saddle stitch finisher is installed.
Original
Punch positions
*When the Punch module is installed.
Original
Copy
*When the Inserter is installed.
Save to
machine's
hard disk
machine's
hard disk
HDD
Document
Image
Image
Call up a
saved file to
reuse
saved file to
reuse
Printed
Transmitted
MAIN FEATURES
1-8
Energy saving features
This product has the following two power reducing modes that conform to the
Energy Star guidelines to help conserve natural resources and reduce
environmental pollution.
Energy Star guidelines to help conserve natural resources and reduce
environmental pollution.
Preheat mode
The preheat mode is the first level of power reduction. The power is
reduced to the fuser unit a preset time after the machine has completed a
job and no further machine operations have been performed. The machine
can recover to the ready condition within a short period of time. The preset
time to enter the mode can be set by a key operator program.
The preheat mode is the first level of power reduction. The power is
reduced to the fuser unit a preset time after the machine has completed a
job and no further machine operations have been performed. The machine
can recover to the ready condition within a short period of time. The preset
time to enter the mode can be set by a key operator program.
Auto power shut-off mode
The auto power shut-off mode is the second level of power reduction. In this mode power is shut off to the
fusing unit and the touch panel. In this state more energy is saved than in the preheat mode but the time
to recover to the ready condition will be longer. The preset time to enter this mode can be set by a key
operator program.
The auto power shut-off mode is the second level of power reduction. In this mode power is shut off to the
fusing unit and the touch panel. In this state more energy is saved than in the preheat mode but the time
to recover to the ready condition will be longer. The preset time to enter this mode can be set by a key
operator program.
When this product is used as a printer, and either of the above modes is active, the mode will be deactivated
automatically by an incoming job and the machine will automatically warm up and start to print when it has
reached the ready temperature.
When this product is configured for multi-function operation, and either of the above modes is active, the mode
will be deactivated as above by an incoming print job. Either mode will also be deactivated by any key
operation on the operation panel or by the action of an original being placed for copying.
automatically by an incoming job and the machine will automatically warm up and start to print when it has
reached the ready temperature.
When this product is configured for multi-function operation, and either of the above modes is active, the mode
will be deactivated as above by an incoming print job. Either mode will also be deactivated by any key
operation on the operation panel or by the action of an original being placed for copying.
As an
E
NERGY
S
TAR
®
Partner, SHARP has
determined that this product
meets the
determined that this product
meets the
E
NERGY
S
TAR
®
guidelines for
energy efficiency.
1-9
1
PART NAMES AND FUNCTIONS
Exterior
Saddle stitch finisher (AR-F16)
*1
/
Finisher (AR-F15)
*1
(See page 3-2)
Punch module (AR-PN4A)
*1
(See page 3-2)
Inserter (AR-CF2)
*1
(See page 3-15)
Automatic document feeder (See page 4-2)
This automatically feeds and scans multiple sheet
originals. Both sides of two-sided originals can be
scanned at once.
originals. Both sides of two-sided originals can be
scanned at once.
Front cover
Open to replace toner cartridge.
Operation panel
Centre tray (See page 4-9)
Finished sheets are deposited here
Bypass tray
Special papers (including transparency film) and
copy paper can be fed from the bypass tray.
copy paper can be fed from the bypass tray.
Power switch (See page 1-16)
Turns the power on and off.
If the power does not come on when the power
switch is turned on, check the main power switch to
see if it is turned on.
If the power does not come on when the power
switch is turned on, check the main power switch to
see if it is turned on.
Tray 5 (Large capacity tray(AR-LC6))
*1
(See page 2-5)
Tray 1-Tray 2
The trays hold paper. Approximately 800 sheets
of standard A4 or 8-1/2" x 11" size paper (80 g/m
of standard A4 or 8-1/2" x 11" size paper (80 g/m
2
(20 lbs.)) can be loaded in tray 1, and
approximately 1200 sheets of standard A4, B5 or
8-1/2" x 11" size paper (80 g/m
approximately 1200 sheets of standard A4, B5 or
8-1/2" x 11" size paper (80 g/m
2
(20 lbs.)) can be
loaded in tray 2.
Tray 3
Tray 3 holds paper. Approximately 500 sheets of
standard (80 g/m
standard (80 g/m
2
(20 lbs.)) paper can be loaded
in this tray. Tabbed paper and transparencies can
also be loaded.
also be loaded.
Tray 4
Tray 4 holds paper. Approximately 500 sheets of
standard (80 g/m
standard (80 g/m
2
(20 lbs.)) paper can be loaded
in this tray.
*1
,
,
and
are peripheral devices. For information on these devices, see the explanations of the devices
in the manual.
(AR-F15)
1
2
3
4
5
6
7
8
9
10
11
12
13
1
2
3
10
Click on the first or last page to see other AR-M550 (serv.man28) service manuals if exist.