DOWNLOAD Sharp AR-M550 (serv.man23) Service Manual ↓ Size: 7.48 MB | Pages: 56 in PDF or view online for FREE

Model
AR-M550 (serv.man23)
Pages
56
Size
7.48 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / ARM550 620 Installation Manual
File
ar-m550-sm23.pdf
Date

Sharp AR-M550 (serv.man23) Service Manual ▷ View online

AR-M550/M620  INSTALLATION MANUAL  (AR-CF2)  3 - 10
(15) Turn ON the main power switch
1) Insert the power plug of the main unit to the outlet.
2) Open the front cabinet, and open the power cover.
3) Turn ON the main power switch, close the power cover, and close
the front cabinet.
4) Turn ON the power switch on the right side of the main unit.
AR-M550/M620  INSTALLATION MANUAL  (AR-F15/F16)  4 - 1
[4] AR-F15/F16 UNPACKING AND 
INSTALLATION
1. Unpacking
When removing or moving, be sure to perform by two persons not to
drop the unit.
A. Unpacking procedure
(1) Removal of the main unit
1) Remove the fixing member and remove the top case.
2) Remove the packaged parts from the add.
3) Check the packaged parts.
Packaged parts
4) Hold the upper section of the machine with two persons, and pull it
up and stand it straight.
(The machine is very heavy. Be careful.)
5) Remove the tape and the skid.
6) Remove the upper add.
1
Positioning pin
1 pc.
5
Staple label
2 pcs.
2
Earth plate
1 pc.
6
Screw G (M4 x 6)
3 pcs.
3
Earth mounting plate
1 pc.
7
Screw H (M4 x 10)
2 pcs.
4
Rail mounting plate
1 pc.
8
Screw I (M4 x 18)
4 pcs.
1
2
5
6
3
4
8
7
AR-M550/M620  INSTALLATION MANUAL  (AR-F15/F16)  4 - 2
7) One person holds the machine so that it does not fall down. The
other person tilts the machine a little to remove packing material.
8) Bring the base of the unit into contact with the floor so that it does
not fall down.
(The base section is slippery. Be careful of that.)
9)
Tilt the machine to the opposite side a little, and remove packing
material on the opposite side.
10) Slowly bring the base section of the machine on the opposite side
to contact with the floor.
11) Remove the vinyl cover.
(2) Fixing member removal
Remove the taping from the finisher.
Remove the shipment locking material with red sticky note.
1) Remove the tape.
2) Remove the tape and remove the protection board and the sheet.
3) Remove the tape and open the upper cover.
4) Remove the tape and remove the transit fixing member and the
sheet.
5) Remove the tape and remove the lower tray transit fixing member.
1
1
2
1
2
1
AR-M550/M620  INSTALLATION MANUAL  (AR-F15/F16)  4 - 3
6) Remove the tape and the fixing member.
7) Remove the tape and remove the jam release door transit fixing
member.
8) Remove the tape and remove the jam release door handle section
transit fixing member.
9) Remove the power cable fixing tape.
10) Open the upper front door, and remove the staple transit fixing
member.
11) Open the lower door, and remove the each tape.
12) Pull out the stitcher remove the screw, and remove the stitcher
transmit fixing member.
13) Remove the screw, and remove the lower cover.
14) Remove the screw, and remove the transit fixing members F and
R.
15) Remove the screw, and remove lift tray rail section transit fixing
members (4 positions).
1
2
3
1
2
1
2
2
2
1
2
2
Page of 56
Display

Click on the first or last page to see other AR-M550 (serv.man23) service manuals if exist.