DOWNLOAD Sharp AR-M550 (serv.man17) Service Manual ↓ Size: 263.95 KB | Pages: 6 in PDF or view online for FREE

AR-M550/M620  ROM VERSION-UP METHOD  10 - 5

If the power is turned OFF during the version-up procedure, normal
writing of data cannot be assured even though the machine can be
booted again.

In such a case, use the spare PCU PWB ROM, the MFP control PWB
ROM (boot, program), and the scanner control PWB ROM each of
which includes the program to be operated, and perform the version-
up procedure again.

Replace with the spare PCU, the controller boot, the scanner control
PWB ROM, and perform procedure “4.” for the replaced ROM again to
write data into it.

Update completed

 

Setting mistake? (6.)

 

NO 

NO  

YES 

 

YES

YES

 

YES

NO

 

NO

 

Set again.

Write the on-board 
files collectively. (4.)

NG is BOOT?

NG is SCAN FAX?

Result: OK?

YES

 

NO

YES

NO

YES

NO

Remove the BOOT Flash ROM and 
replace it with a spare one. (If there is 
any NG Flash ROM, replace it, too.)

Booted normally?

Write the on-board files 

collectively. (4.)

Result: OK?

Result: OK?

Update completed

Update completed

Write with an empty 

socket. (5.)

If the Flash ROM itself is 
defective, replace it with a 
new one and try again.

AR-M550/M620  ROM VERSION-UP METHOD  10 - 6

When transferring ROM program files by using Fcopy.exe program,
copy Fcopy.exe program and the ROM program files in the same
folder and boot MS-DOS. Then, open the above folder on MS-DOS,
and type "Fcopy file name"and transfer is performed. In the example
below, the SFU file is placed in C:\ROM folder, and it is transferred.

 

YES

NO

YES

NO 

YES

NO 

Booted normally?

Remove the Flash ROM 
and replace it with a 
spare.

Write the on-board files 
collectively. (4.)

Result: OK?

Update completed

Write with the empty socket. 

(6.)

Result: OK?

Update completed

If the Flash ROM itself is 
defective, replace it with a 
new one and try again.

YES

NO

Write the on-board files 
collectively. (4.)

Result: OK?

Update completed

If the Flash ROM itself is 
defective, replace it with a 
new one and try again.

AR-M550/M620  ROM VERSION-UP METHOD  10 - 6

When transferring ROM program files by using Fcopy.exe program,
copy Fcopy.exe program and the ROM program files in the same
folder and boot MS-DOS. Then, open the above folder on MS-DOS,
and type "Fcopy file name"and transfer is performed. In the example
below, the SFU file is placed in C:\ROM folder, and it is transferred.

 

YES

NO

YES

NO 

YES

NO 

Booted normally?

Remove the Flash ROM 
and replace it with a 
spare.

Write the on-board files 
collectively. (4.)

Result: OK?

Update completed

Write with the empty socket. 

(6.)

Result: OK?

Update completed

If the Flash ROM itself is 
defective, replace it with a 
new one and try again.

YES

NO

Write the on-board files 
collectively. (4.)

Result: OK?

Update completed

If the Flash ROM itself is 
defective, replace it with a 
new one and try again.

AR-M550/M620  ROM VERSION-UP METHOD  10 - 6

When transferring ROM program files by using Fcopy.exe program,
copy Fcopy.exe program and the ROM program files in the same
folder and boot MS-DOS. Then, open the above folder on MS-DOS,
and type "Fcopy file name"and transfer is performed. In the example
below, the SFU file is placed in C:\ROM folder, and it is transferred.

 

YES

NO

YES

NO 

YES

NO 

Booted normally?

Remove the Flash ROM 
and replace it with a 
spare.

Write the on-board files 
collectively. (4.)

Result: OK?

Update completed

Write with the empty socket. 

(6.)

Result: OK?

Update completed

If the Flash ROM itself is 
defective, replace it with a 
new one and try again.

YES

NO

Write the on-board files 
collectively. (4.)

Result: OK?

Update completed

If the Flash ROM itself is 
defective, replace it with a 
new one and try again.