Sharp AR-M550 (serv.man15) Service Manual ▷ View online
AR-M550/M620 SIMULATION 8 - 6
4. Outline and purpose
The simulation has the following functions to grasp the machine oper-
ating status, identify the trouble position and causes in an earlier stage,
and make various setups and adjustments speedily for improving the
serviceability of the machine.
ating status, identify the trouble position and causes in an earlier stage,
and make various setups and adjustments speedily for improving the
serviceability of the machine.
1) Various adjustments
2) Setup of specifications and functions
3) Canceling troubles
4) Operation check
5) Various counters check, setup, and clear
6) Machine operating status (operation history) data check, clear
7) Transfer of various data (adjustments, setup, operations, counters)
The operating procedures and the displays differ depending on the
form of the operation panel of the machine.
form of the operation panel of the machine.
5. Code-type simulation
A. Operating procedures and operations
∗
Entering the simulation mode
1) Copy mode key ON
→
Program key ON
→
Asterisk (*) key ON
→
CLEAR key ON
→
Asterisk (*) key ON
→
Ready for input of a main
code of simulation
2) Entering a main code with the 10-key
→
START key ON
3) Entering a sub code with the 10-key
→
START key ON
4) Select an item with the scroll key and the item key.
5) The machine enters the mode corresponding to the selected item.
Press START key or EXECUTE key to start the simulation opera-
tion.
tion.
To cancel the current simulation mode or to change the main code
and the sub code, press the user setup key.
and the sub code, press the user setup key.
∗
Canceling the simulation mode to return to the normal mode
1) Press CA key.
66
01
FAX-related soft SW setting check/change
●
02
FAX-related soft SW clear (Excluding FAX adjustment values)
●
03
FAX-related memory check
●
04
Signal send mode (Signal send level: Max.)
●
05
Signal send mode (Signal send level: Soft SW setting)
●
06
Confidential pass code print
●
07
Image memory content output
●
08
Voice message reproduction (Signal send level: Max.)
●
09
Voice message reproduction (Signal send level: Soft SW setting)
●
10
Image memory clear
●
11
300bps signal send (Signal send level: Max.)
●
12
300bps signal send (Signal send level: Soft SW setting)
●
13
Dial number registration
●
14
Dial test (10PPS make time setting & delivery test)
●
15
Dial test (20PPS make time setting & send test)
●
16
Dial test (DTMF signal adjustment & send test)
●
17
DTMF signal send mode (Signal send level: Max.)
●
18
DTMF signal send mode (Signal send level: Soft SW setting)
●
19
Address book backup (WR TO FLASH)
●
20
Address book backup (RD FROM FLASH)
●
21
FAX information print
●
23
FAX program download
●
24
FAST memory data clear
●
25
MODEM dial-in FAX number registration
●
26
MODEM dial-in telephone number registration
●
27
Voice warp transfer destination registration
●
29
Address book clear
●
30
TEL/LIU status change check
●
31
TEL/LIU setting
●
32
Receive data check
●
33
Signal detection check
●
34
Communication time measurement display
●
35
MODEM program rewrite
●
36
MFP controller I/F check
●
39
FAX destination registration
●
60
(Blind) ACR data registration
●
67
02
Centro port check
●
11
Select IN signal setting
●
16
Network card check
●
Main
code
code
Sub
code
Operation contents
Data save destination/Target
MFP
Scanner
Engine
AR-M550/M620 SIMULATION 8 - 7
YES
NO
NO
YES
YES
YES
NO
NO
NO
YES
NO
YES
YES
NO
NO
YES
YES
NO
Standby for entry of SIM
sub code
Enter SIM sub code with
the 10-key.
Press the START button.
The display is made according
to the selected mode and the item.
START (Copy mode)
Press the Program key.
Press the asterisk (*) key.
Press the clear key.
Press the asterisk (*) key.
Standby for entry of
SIM code.
Enter the main code of
SIM with the 10-key.
The main code of SIM
is displayed.
Press the START button.
Is there a sub code ?
Select the mode and the
item with the scroll key
and the item key.
he
Operation check ?
Operating conditions
check ?
Data clear ?
Adjustments
or setting (counter data
change) ?
Do you
want to change the
content ?
Enter the new setting and
adjustment values.
Press the CUSTOM
SETTINGS key
Press the CUSTOM
SETTINGS key
Press the EXECUTE button
and OK button.
Operation is made according
to the selected mode and item.
Press the EXECUTE button
and OK button.
Press the EXECUTE button
and OK button.
The display is made according to
the selected some and the item.
Press the EXECUTE button
and OK button.
Is it the same
simulation ?
Do you want
to perform another
simulation ?
Do you
want to end the
simulation ?
The changed content
is stored.
The simulation mode
is canceled.
Press the clear all key.
Operation is made according
to the selected mode and the item.
(Other modes)
The selected mode and
the item are cleared.
AR-M550/M620 SIMULATION 8 - 8
B. Simulation list
(1) Main/ Sub
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
1
1
Used to check the operations of the
scanner (read) unit and its control
circuit.
scanner (read) unit and its control
circuit.
Operation test/Check
Optical (Image
scanning)
scanning)
Operation
2
Used to check the operation of
sensor and detector in the scanning
(read) section and the related circuit.
sensor and detector in the scanning
(read) section and the related circuit.
Operation test/Check
Optical (Image
scanning)
scanning)
Operation
2
1
Used to check the operations of the
automatic document feeder unit and
the control circuit.
automatic document feeder unit and
the control circuit.
Operation test/Check
DSPF
Operation
2
Used to check the operations of the
sensors and detectors in the
automatic document feeder unit and
the related circuits.
sensors and detectors in the
automatic document feeder unit and
the related circuits.
Operation test/Check
DSPF
Operation
3
Used to check the operations of the
loads in the automatic document
feeder unit and the control circuits.
loads in the automatic document
feeder unit and the control circuits.
Operation test/Check
DSPF
Operation
3
2
Used to check the operation of
sensor and detector in the finisher
and the related circuit.
sensor and detector in the finisher
and the related circuit.
Operation test/Check
Finisher
Operation
3
Used to check the operation of the
load in the finisher and the control
circuit.
load in the finisher and the control
circuit.
Operation test/Check
Finisher
Operation
10
Finisher (AR-F16) adjustment
Adjustment
Finisher
Operation
30
Used to check the operations of the
sensors and detectors in the
inserter.
sensors and detectors in the
inserter.
Operation test/Check
Inserter
31
Used to check the operations of the
loads in the inserter and the related
circuits.
loads in the inserter and the related
circuits.
Operation test/Check
Inserter
Operation
32
Inserter paper width detection level
setting.
setting.
Setting (Adjustment)
Inserter
Operation
4
2
Used to check the operations of the
sensors and detectors in the paper
feed section (large capacity tray) and
the related circuit.
sensors and detectors in the paper
feed section (large capacity tray) and
the related circuit.
Operation test/Check
Paper feed
Operation
3
Used to check the operations of the
loads in the paper feed section (large
capacity tray) and the related circuit.
loads in the paper feed section (large
capacity tray) and the related circuit.
Operation test/Check
Paper feed
Operation
5
1
Used to check the operation of the
display, LCD in the operation panel,
and control circuit.
display, LCD in the operation panel,
and control circuit.
Operation test/Check
Operation
(Display/Operation
key)
(Display/Operation
key)
Operation
2
Used to check the operation of the
heater lamp and the control circuit.
heater lamp and the control circuit.
Operation test/Check
Fixing (Fusing)
Operation
3
Used to check the operation of the
scanner lamp and the control circuit.
scanner lamp and the control circuit.
Operation test/Check
Optical (Image
scanning)
scanning)
Operation
4
Used to check the operation of the
discharge lamp and the related
circuit.
discharge lamp and the related
circuit.
Operation test/Check
Process
Operation
6
1
Used to check the operation of the
paper transport system loads and
the control circuit.
paper transport system loads and
the control circuit.
Operation test/Check
Paper transport
(Discharge/
Switchback/
Transport)
(Discharge/
Switchback/
Transport)
Operation
2
Used to check the operations of
each fan motor and its control circuit.
each fan motor and its control circuit.
Operation test/Check
Other
Operation
3
Used to check the operations of the
transfer unit and the related circuit.
transfer unit and the related circuit.
Operation test/Check
Process (Transfer)
Operation
AR-M550/M620 SIMULATION 8 - 9
7
1
Used to set the operating conditions
of aging.
of aging.
Setting
Operation
6
Used to set the intermittent aging
cycle.
cycle.
Setting
Operation
8
Used to set the warm-up time display
YES/NO.
YES/NO.
Setting
Operation
8
1
Used to check and adjust the
operations of the developing voltage
of each color and the control circuit.
operations of the developing voltage
of each color and the control circuit.
Adjustment/Operation
test/Check
test/Check
Image process
(Photoconductor/
Developing/
Transfer/Cleaning)
(Photoconductor/
Developing/
Transfer/Cleaning)
2
Used to check and adjust the
operation of the main charger grid
voltage in each printer mode and the
control circuit.
operation of the main charger grid
voltage in each printer mode and the
control circuit.
Adjustment/Operation
test/Check
test/Check
Image process
(Photoconductor/
Developing/
Transfer/Cleaning)
(Photoconductor/
Developing/
Transfer/Cleaning)
6
Used to check and adjust the
operation of the transfer charger
voltage and the control circuit.
operation of the transfer charger
voltage and the control circuit.
Adjustment/Operation
test/Check
test/Check
Image process
(Photoconductor/
Developing/
Transfer/
Cleaning)/Transfer
(Photoconductor/
Developing/
Transfer/
Cleaning)/Transfer
17
Used to check and adjust the
operation of the transfer charger
voltage and the related circuit.
(Transfer belt cleaning mode)
operation of the transfer charger
voltage and the related circuit.
(Transfer belt cleaning mode)
Operation test/Check
Image process
(Photoconductor/
Developing/
Transfer/Cleaning)
(Photoconductor/
Developing/
Transfer/Cleaning)
18
Used to check and adjust the voltage
of the transfer roller cleaning/transfer
roller print mode and the control
circuit.
of the transfer roller cleaning/transfer
roller print mode and the control
circuit.
Adjustment/Operation
test/Check
test/Check
Image process
(Photoconductor/
Developing/
Transfer/Cleaning)
(Photoconductor/
Developing/
Transfer/Cleaning)
19
Used to check and adjust the fusing
bias voltage and the control circuit.
bias voltage and the control circuit.
Adjustment/Operation
test/Check
test/Check
Fusing
9
1
Used to check and adjust the
operation of the load (clutch/
solenoid) in the duplex section and
the control circuit.
operation of the load (clutch/
solenoid) in the duplex section and
the control circuit.
Operation test/Check
Duplex
Operation
2
Used to check the operations of the
sensors and detectors in the duplex
section and its control circuit.
sensors and detectors in the duplex
section and its control circuit.
Operation test/Check
Duplex
Operation
10
1
Used to check the operations of the
toner motor and the related circuit.
toner motor and the related circuit.
Operation test/Check
Process
(Developing)
(Developing)
Operation
2
Used to check the operations of the
toner remaining quantity sensor and
the related circuit.
toner remaining quantity sensor and
the related circuit.
Operation test/Check
Process
(Developing)
(Developing)
Operation
13
0
Used to cancel the self-diag "U1"
trouble. (Only when FAX is
installed.)
trouble. (Only when FAX is
installed.)
Clear/Cancel (Trouble
etc.)
etc.)
FAX
Trouble
14
0
Used to cancel excluding the self-
diag U1/LOC/U2/PF troubles.
diag U1/LOC/U2/PF troubles.
Clear/Cancel (Trouble
etc.)
etc.)
Trouble
Error
15
0
Used to cancel the self-diag "U6-09,
F3-12, 22" (large capacity paper
feed tray, paper feed trays 1, 2)
troubles.
F3-12, 22" (large capacity paper
feed tray, paper feed trays 1, 2)
troubles.
Clear/Cancel (Trouble
etc.)
etc.)
LCC
Trouble
16
0
Used to cancel the self-diag U2
troubles.
troubles.
Clear/Cancel (Trouble
etc.)
etc.)
MFP control PWB,
PCU PWB,
scanner control
PWB
PCU PWB,
scanner control
PWB
Trouble
17
0
Used to cancel the PF troubles
(when the copy inhibit command
from the host computer is received).
(when the copy inhibit command
from the host computer is received).
Clear/Cancel (Trouble
etc.)
etc.)
Communication
unit (TEL/LIU/
MODEM etc.)
unit (TEL/LIU/
MODEM etc.)
Trouble
Error
21
1
Used to set the maintenance cycle.
Setting
Specifications
Counter
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
Click on the first or last page to see other AR-M550 (serv.man15) service manuals if exist.